Removal of arsenic in acidic wastewater using Lead–Zinc smelting slag: From waste solid to As-stabilized mineral

High-arsenic wastewater has long been considered a major threat to ecological balance and human health because of its strong toxicity and high mobility. Herein, an environmentally friendly process was proposed for As removal and fixation in the form of As-stabilized mineral, using Lead–Zinc smelting (LZS) slag as the in situ Fe donor, neutralizer, and crystal seed. The slag was dissolved in the wastewater and released Fe and Ca ions, while simultaneously increasing the pH value of the solution to help scorodite synthesis. The dissolved Ca 2+ ion preferentially reacted with SO 4 2− ion in the form of CaSO 4 ·2H 2 O precipitate as in situ “seeds” for As precipitation. The dissolved Fe(II) and As(III) ions were oxidized to Fe(III) and As(V) ions by H 2 O 2 , and later reacted with each other to generated amorphous ferric arsenate on the surface of CaSO 4 ·2H 2 O, and then evolved into scorodite crystals with high stability. With a Fe/As molar ratio of 2, a reaction temperature of 90 °C, and a reaction time of 12 h, 98.42% of As was effectively precipitated from the wastewater with an initial As concentration of 7530.00 mg/L. Moreover, the leached As concentration of the As-bearing precipitate in the TCLP test was 3.46 mg/L. The concentration of the residual As and heavy metals ions in the final filtrate was lower than local wastewater discharge standards, successfully realizing the treatment of smelting wastewater. In summary, a prospective process successfully shows a great potential for co-treatment of LZS wastewater and slag, which could advance the large-scale disposal of LZS plants.