Waste recycling of coal fly ash: A novel approach to prepare hierarchically porous coal fly ash/Al2O3 ceramic composite with high porosity and high strength templated by emulsion-assisted self-assembly

The coal fly ash (CFA) produced from coal-fired power generation is classified as a common solid waste; thus, improving the recovery and utilization rate of CFA is highly desirable. In this study, a novel strategy using CFA and Al 2 O 3 as raw materials, to prepare hierarchically porous ceramic composites that serve as potential candidates for future building materials is developed. In this process, the well-developed self-assembly method in which an anionic modifier is used to prepare hydrophobic powders that form an attractive oil/water network via electrostatic interactions , thereby yielding honeycomb-like structures. In order to explore the mechanism of preparation, five samples with different mixture ratios of alumina and CFA were prepared according to 1: 0, 2: 1, 1: 1, 1: 2, and 0: 1 (Alumina: CFA). Compared with the sample prepared with pure CFA, the as-prepared CFA/Al 2 O 3 composite exhibited both superior porosity and high mechanical property. When the porosity is as high as 73 ± 0.17%, the compressive strength is as high as 80.9 ± 3.4mpa (alumina: CFA = 1:1). As the porosity decreases to 49.3 ± 0.7%, the compressive strength reaches 159.33 ± 36.89mpa (alumina: CFA = 1:2). Moreover, this work obtains the highest compressive strength-porosity related B-value in comparison to previously reported CFA-based composites and provides a new insight into the effective recycling of CFA and offers a novel approach to prepare CFA/Al 2 O 3 composite with excellent overall mechanical properties .