Preparation and application of Co3O4 catalysts from ZIF-67 membranes over paper-like stainless steel fibers in isopropanol combustion

Co 3 O 4 catalysts supported on paper-like stainless steel fibers (PSSF) were prepared by MOFs-templated (M) method and applied for catalytic combustion of isopropanol. Physicochemical properties of the as-synthesized Co 3 O 4 catalysts were investigated by SEM, EDS mapping, TEM, XRD , BET, XPS and H 2 -TPR, respectively. Characterization results of SEM and TEM shown that Co 3 O 4 (M)-350 and Co 3 O 4 (M)-400 still remained the dodecahedron shape of the ZIF-67 precursor and possessed porous structures. The XPS results shown that the ratio of Co 3+ /Co 2+ and O c /O c  ​+ ​O a  ​+ ​O l firstly increased and then decreased with the increase of calcination temperature. Among the as-synthesized catalysts, Co 3 O 4 (M)-400 exhibited the highest activity for the catalytic combustion of isopropanol with the T 50 and T 90 values of 258 ​°C and 281 ​°C, respectively, which was associated with high BET surface area, high amount of Co 3+ species and abundant surface chemisorbed oxygen. Moreover, Co 3 O 4 (M)-400 was employed as a structured catalyst for isopropanol combustion, the catalytic kinetics were studied based on different feed concentration, bed height and GHSV. The experimental results indicated that the T 50 and T 90 of isopropanol combustion over Co 3 O 4 (M)-400 with the bed height of 2 ​cm were increased slightly as the GHSV and feed concentration of isopropanol increased.