Removal of Hg2+ from desulfurization wastewater by tannin-immobilized graphene oxide

A novel adsorbent consisting of tannic acid (TA) immobilized on graphene oxide (GO) was proposed and used to remove Hg 2+ from desulfurization wastewater. The morphology and physicochemical properties of tannin-immobilized graphene oxide (TAIGO) were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The characterization results showed that TA was successfully immobilized on GO, and that new functional groups were introduced on TAIGO. The effects of contact time, adsorbent dose, pH, and ion components on removal efficiency were evaluated. The adsorption process was found to be complete within 15 min, and the removal efficiency increased with increasing adsorbent dosage. The pH value affected the protonation of TAIGO and the form of Hg 2+ in wastewater. High concentrations of Cl − and SO 3 2− hindered the adsorption performance, whereas SO 4 2− and cations had a negligible effect. In addition, the excellent economic benefits of TAIGO were analyzed in an economic evaluation, and the Hg 2+ removal efficiency remained at 88% after three recycles. A pseudo-second-order kinetic model ( R  = 0.9995) was used to fit the adsorption process, and the oxygen-containing functional groups and chelation reaction played critical roles in adsorption. TAIGO is a low-cost adsorbent with high Hg 2+ removal efficiency and could be further used in practical desulfurization wastewater. Graphical abstract