Adsorption of antimony using amino-functionalized magnetic MIL-101(Cr): Optimization by response surface methodology

Amino-functionalized magnetic MIL-101(Cr) was prepared via a one-step solvothermal method, characterized, and applied in adsorptive Sb(III) removal. The effects of solution pH, adsorbent dosage, and coexisting substances on the adsorption of Sb(III) by MIL-101(Cr)–NH 2 /MnFe 2 O 4 were studied. The adsorption kinetics were analyzed using pseudo-first order, pseudo-second order, intraparticle diffusion, and Elovich models, while Freundlich and Langmuir isotherm models were used to fit the experimental data. The pseudo-second-order kinetic model provided the best fit for the kinetic data. The maximum adsorption capacity of MIL-101(Cr)–NH 2 /MnFe 2 O 4 for Sb(III) was 91.07 ​mg/g, as calculated using the Langmuir adsorption isotherm model. Thermodynamic analysis revealed that the adsorption of antimony onto MIL-101(Cr)–NH 2 /MnFe 2 O 4 is spontaneous and endothermic, while response surface optimization revealed that the optimal conditions for Sb(III) adsorption by MIL-101(Cr)–NH 2 /MnFe 2 O 4 are an adsorbent loading of 222.55 ​mg/L, a pH of 4.5, and a temperature of 294.59 ​K. The predicted adsorption capacity of MIL-101(Cr)–NH 2 /MnFe 2 O 4 for Sb(III) is only a 1.8% deviation from the actual value. Furthermore, MIL-101(Cr)–NH 2 /MnFe 2 O 4 exhibits strong magnetism, allowing it to be separated from wastewater using a magnet. Finally, a preliminary economic analysis showed that the cost of treating a ton wastewater containing 25 ​mg/L antimony using this composite would be 26.24 USD. Thus, MIL-101(Cr)–NH 2 /MnFe 2 O 4 is promising for treatment of Sb(III)-containing wastewater.