Novel recycling of incinerated sewage sludge ash (ISSA) and waste bentonite as ceramsite for Pb-containing wastewater treatment: Performance and mechanism

With rapid economic growth and urbanisation, the reuse and recycling of solid wastes has become a high priority for the sustainable development of modern cities. In this study, two typical solid wastes, incinerated sewage sludge ash (ISSA) and waste bentonite , were co-valorised to produce granular adsorbents through a simple and energy-saving pelletisation/sintering process. A mixture of ISSA and bentonite at a weight ratio of 3:1 was pelletised and sintered at 700 °C. The resultant ceramsite, with good mechanical strength, could effectively remove Pb(Ⅱ) from aqueous solutions. The adsorption kinetics can be described by the pseudo-first-order (PFO) model. The results indicated that the Pb(Ⅱ) adsorption process was dominated by electrostatic attraction , precipitation, and complexation. The isothermal data exhibited a good correlation with the Freundlich model, indicating that the adsorption process was non-ideal and spontaneous. The maximum adsorption capacity was approximately 21.6 ± 0.35 mg/g at 318 K. After 5 cycles of regeneration, the adsorbent maintained good adsorption performance. Moreover, the removal rate was not greatly affected by ionic strength . These findings demonstrate that the granular adsorbent prepared with ISSA and waste bentonite can be recognised as a promising adsorbent for Pb-containing wastewater treatment .