The synergetic effect of zinc phthalate and carboxymethyl cellulose–carbon nanotube of glass fibers surfaces on improving strength and toughness of polypropylene composite

The interfacial interaction between glass fibers (GFs) and polypropylene (PP) resin is the key factor which affects the properties of GFs reinforced PP composites. The β-transcrystallization (β-TC) structure induced by β-nucleating agent (β-NA) at the interface is beneficial to improving the interfacial performance and comprehensive mechanical properties. However, due to the poor adhesive ability, it is difficult to introduce β-NAs onto GFs surface directly. In this work, for solving above problem, the sodium carboxymethyl cellulose (CMC) and  NH 2 functionalized multiwalled carbon nanotubes (CNTs) were used to construct the network structure on GFs (CMC-CNT-GF) through plenty of active groups. Furthermore, the zinc phthalate (ZnPht, β-NA) was synthesized and coated on GFs surface by hydrogen bonds interaction with CMC-CNT and physical anchoring effect (ZnPht@CMC-CNT-GF). Finally, the hybrid GFs reinforced PP composite (iPP/ZnPht@CMC-CNT-GF) was prepared, which exhibited enhanced tensile, flexural, and impact strength by 20.1, 9.3, and 33.3%, respectively when compared with the iPP/raw GF due to the formation of β-TC and improvement of interfacial adhesion. This study provides an effective strategy to introduce β-NAs on GFs with network structure for improving interfacial properties by inducing β-TC to enhance the strength and toughness of composite, which could be applied in other fiber/semicrystalline polymer systems. Graphical The interfacial interaction between glass fibers (GFs) and polypropylene (PP) is a key factor that affects the properties of the composites. In this work, to overcome the difficulty to introduce β-nucleating agents (β-NAs) onto GFs, the zinc phthalate (ZnPht) was coated on GFs surface via hydrogen bond interactions with carboxymethyl cellulose–carbon nanotube (CMC-CNT) and physical anchoring effect in CMC-CNT-GF. The iPP/ZnPht@CMC-CNT-GF has increased strength and toughness. This study provides an effective strategy to introduce β-NAs on GFs with a network for improving interfacial properties.