Direct modification of polyketone resin for anion exchange membrane of alkaline fuel cells

A kind of side-chain type anion exchange membranes (AEMs) with high ionic conductivity and good comprehensive stability was prepared via direct modification of commercial engineering plastic polyketone with diamines through Paal-Knorr reaction and quaternization reaction. It was found that the amount of diamine can effectively tune the microphase morphology and properties of the prepared quaternized functionalized-polyketone anion exchange membranes (QAFPK-AEMs). The tensile strength was increased from 18.6 MPa to 38.6 MPa, and the ion exchange capacity (IEC) was increased from 1.11 mmol/g to 2.71 mmol/g depending on the amount of added diamine. The QAFPK-1-6-AEM with the IEC of 1.43 mmol/g showed the highest hydroxide conductivity of 65 mS/cm at 25 °C and 96.8 mS/cm at 80 °C. The high ionic conductivity was achieved through the establishment of effective ionic channels, and it maintained 70% of the initial ionic conductivity after the 192 h treatment in 2 mol/L KOH (aq) at 80 °C. Moreover, a peak power density of 129 mW/cm 2 was achieved when the assembled single cell with QAFPK-1-6-AEM was operated at 50 °C. Thus, the prepared QAFPK-AEMs showed great potential applications for the anion exchange membrane fuel cells (AEMFCs).