Graphitic carbon nitride quantum dots as an “off-on” fluorescent switch for determination of mercury(II) and sulfide

A rapid method has been developed for the determination of Hg(II) and sulfide by using graphitic carbon nitride quantum dots (g-CNQDs) as a fluorescent probe. The interaction between Hg(II) and g-CNQDs leads to the quenching of the blue g-CNQD fluorescence (with excitation/emission peaks at 390/450 nm). However, the fluorescence can be recovered after addition of sulfide such that the “turn-off” state is switched back to the “turn-on” state. The g-CNQDs were fully characterized by transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-vis absorption and fluorescence spectroscopy. Under the optimal experimental conditions, this probe is highly selective and sensitive to Hg(II). The linear response to Hg(II) extends from 0.20 to 21 μM with a detection limit of 3.3 nM. In addition, sulfide can be detected via the recovery of fluorescence. The linear response range for sulfide species is from 8.0 to 45 μM with a detection limit of 22 nM. The mechanism of the “turn-off-on” scheme is discussed. The methods have been applied to the analysis of spiked tap water, lake water and wastewater samples. Schematic of an off-on fluorescent probe for mercury(II). The fluorescence of graphitic carbon nitride quantum dots (g-CNQDs) is quenched by Hg 2+ but is recovered after reacting with S 2− as it can combine with Hg 2+ on the surface of g-CNQDs.