Polyamide thin-film composite membrane fabricated through interfacial polymerization coupled with surface amidation for improved reverse osmosis performance

In this study, the novel technique, namely interfacial polymerization (IP) coupled with surface amidation, was proposed to fabricate polyamide thin-film composite (TFC) membranes for improved reverse osmosis performance. TFC membrane with loose polyamide separation layer was firstly prepared through conventional IP process. Surface amidation was then performed through covering the surface of the loose polyamide layer with aqueous 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) solution. Amidation reaction between the free carboxylic and amino groups on membrane surface was confirmed through ATR-FTIR and XPS analyses. Permeation tests revealed that the step of surface amidation could effectively improve the ability of membrane rejection to solute, showing significant increases of NaCl, NaNO 3 and glycerol rejections from about 96.4%, 90.5% and 78.4% to 97.8%, 93.7% and 91.3%, respectively. The water permeability of the membrane obtained via IP followed with surface amidation was at least 22.3% higher than the membrane of the same NaCl rejection obtained via conventional IP process. Thus, the method developed was attractive for the fabrication of TFC reverse osmosis membranes with improved permeability to water and rejection ability to solutes. Additionally, the step of surface amidation of present work can be potentially applied to the in-situ rejuvenation of used polyamide reverse osmosis membranes.