Modification of expanded graphite and its adsorption for hydrated salt to prepare composite PCMs

MgCl 2 ·6H 2 O is a promising inorganic phase change material (PCM) with abundant resources from salt lakes, while its wide applications are greatly hampered by the drawbacks of phase separation, supercooling and corrosivity, inherent in hydrated salts. Herein a novel expanded graphite (EG) based composite PCM containing MgCl 2 ·6H 2 O was explored, which involved modifying EG for increasing its hydrophilicity, compressing the modified EG (MEG) into round blocks, and immersing the blocks into melted MgCl 2 ·6H 2 O. The optimal mass ratio of TX-100 to EG and the favorable packing density of the MEG block are determined to be around 0.06 and 350 kg/m 3 , at which the adsorptive capacity of the modified EG block reaches 80% for MgCl 2 ·6H 2 O, larger than 73% of the unmodified one. The as-prepared MgCl 2 ·6H 2 O/MEG composite block, which consists of 80.1% of MgCl 2 ·6H 2 O, 1.1% of TX-100, and 18.8% of EG, maintains a similar melting point to that of MgCl 2 ·6H 2 O, and its latent heat is as high as 116.7 J/g. Furthermore, the supercooling degree of the composite block is found to be around 1.3 °C, much less than 11.2 °C of MgCl 2 ·6H 2 O. The thermal conductivity of the composite block is about 7.7 times as large as that of MgCl 2 ·6H 2 O. And the composite exhibits a decrease only by 2.7% in phase change enthalpy after 500 thermal cycles, much lower than 41.7% for MgCl 2 ·6H 2 O. These good thermal characteristics make the MgCl 2 ·6H 2 O/MEG composite PCM show great potentials in practical applications.