Recyclable Fe3O4@CNT nanoparticles for high-efficiency solar vapor generation

Solar power, as an important source of renewable energy during the recent years, holds a great potential to produce vapor. Solar-assisted evaporation systems usually rely on the concentration of nanofluids and the intensity of solar illumination. However, the nanofluids used in these systems can cause secondary pollution. These issues severely limit large-scale application of the solar evaporation technology. In this study, we developed a solar thermal evaporation system based on carbon nanotubes (CNTs) decorated with magnetic Fe 3 O 4 nanoparticles (Fe 3 O 4 @CNT), which could be separated from water under the action of a magnetic force. The two components (with different ratios) of these Fe 3 O 4 @CNT differed in their magnetic and thermal properties. A high evaporation efficiency (60.3%) was obtained with a 0.5   g/L Fe 3 O 4 @CNT nanofluid under a solar illumination power of 10   sun (1   sun   =   1   kW·m −2 ), which was achieved by heating the nanofluid locally rather than by increasing the temperature in bulk. A thermal receiver efficiency of 88.7% was obtained with a 0.5   g/L Fe 3 O 4 @CNT nanofluid under a solar illumination power of 1   sun achieved by a bulk temperature increase. The Fe 3 O 4 @CNT nanoparticles could be separated from water at a rate faster than that of the Fe 3 O 4 nanoparticles. The recovery rate of the Fe 3 O 4 nanoparticles and Fe 3 O 4 @CNT ranged from 97.9% to 98.7%. The Fe 3 O 4 nanoparticles in Fe 3 O 4 @CNT enhance their ability to absorb the solar energy, thus making it higher than that of CNTs. The recovery rate and efficiency could be controlled by adjusting the magnetic field strength and the ratio of Fe 3 O 4 and CNTs. Thus, this system study provides an approach to not only significantly reduce the material consumption in the design of solar evaporators, but also to realize broad solar energy applications such as seawater desalination and vapor generation.