Nd-induced honeycomb structure of intermetallic phase enhances the corrosion resistance of Mg alloys for bone implants

Mg-5.6Zn-0.5Zr alloy (ZK60) tends to degrade too rapid for orthopedic application, in spite of its natural degradation, suitable strength and good biocompatibility. In this study, Nd was alloyed with ZK60 via laser melting method to enhance its corrosion resistance. The microstructure features, mechanical properties and corrosion behaviors of ZK60- x Nd ( x  = 0, 1.8, 3.6, 5.4 wt.%) were investigated. Results showed that laser melted ZK60- x Nd were composed of fine ɑ-Mg grains and intermetallic phases along grain boundaries. And the precipitated intermetallic phases experienced successive changes: divorced island-like MgZn phase → honeycomb-like T phase → coarsened and agglomerated W phase with Nd increasing. It was worth noting that ZK60-3.6Nd with honeycomb-like T phase exhibited an optimal corrosion behavior with a corrosion rate of 1.56 mm year −1 . The improved corrosion behavior was ascribed to: (I) dense surface film caused by the formation of Nd 2 O 3 hindered the invasion of immersion solution; (II) the three-dimensional honeycomb structure of intermetallic phases formed a tight barrier to restrain the propagation of corrosion. Moreover, ZK60-3.6Nd exhibited good biocompatibility. It was suggested that ZK60-3.6Nd was a preferable candidate for biodegradable bone implant.