Electrochemical-catalytic reduction of nitrate over Pd–Cu/γAl2O3 catalyst in cathode chamber: Enhanced removal efficiency and N2 selectivity

The Pd–Cu/γAl 2 O 3 catalysts were prepared by impregnation method and introduced into the cathode chamber of a divided electrochemical denitrification cell with two graphite plates as the cathode and anode, to enhance the nitrate removal efficiency and N 2 selectivity. The Pd–Cu/γAl 2 O 3 catalysts were characterized by transmission electron microscope (TEM), X-ray diffraction (XRD), specific surface area measurements (BET) and inductively coupled plasma-atomic emission spectrometry (ICP-AES). In the rationally designed electrochemical-catalytic (ECC) system, the as-prepared catalyst could significantly enhance the nitrate degradation rate to 1.08   mg/L at current density of 10   mA/cm 2 , which was approx. 2.5 times compared with the electrochemical (EC) system without catalysts adding in. Additionally, a higher nitrogen selectivity of 80.37% was obtained under the same experiment condition. The improved performances were likely due to the presence of a catalytic reduction reaction of nitrate with the appropriate amount of hydrogen generated by electrolysis as reductant. Significantly, the current efficiency was calculated and enhanced value of 20–40% (depended on current density) was obtained in the ECC process with a catalyst content of 1.0   g/L.