A 3D aerogel evaporator for efficient solar interfacial evaporation: Breaking through the upper limit of steam production rate

Solar desalination is the most effective way to obtain clean and cheap fresh water. However, its lower upper limit of steam production rate limits its development and practical applications. In this paper, a microcrystalline cellulose aerogel composite Mo 2 C evaporator (MCAM) was prepared by combining Mo 2 C with microcrystalline cellulose aerogel (MCA). The evaporator consists of MCAM photothermal layer, polyurethane (PU) sponge insulation layer and one-dimensional water channel. Mo 2 C has high-light absorption efficiency. At the same time, the vertical channel inside the MCA makes the incident light be reflected and absorbed for many times inside. Benefiting from the synergistic effect of the vertical channel of MCA and the light absorption ability of Mo 2 C, MCAM obtained a high light absorption efficiency of 96.96 %. The interaction between the MCAM evaporator and water can reduce the evaporation enthalpy, thereby breaking the upper limit of the steam generation rate. Therefore, the evaporator achieved a steam production rate of 1.92 kg⋅m −2 ⋅h −1 and an energy utilization efficiency of 118.2 %. In addition, MCAM shows excellent salt tolerance and self-discharging salt ability, which ensures its stable operation in high-salinity environment. Besides its high efficiency, MCAM has significant purification effect on simulated seawater, heavy metal wastewater, and organic wastewater. This study provides a new strategy for further improving the steam production rate of the solar interface evaporator.