Alcohol formaldehyde resin solid acid catalytic conversion of biomass into furan compounds

The conversion of waste lignocellulosic biomass into biomass platform chemicals is very promising. In this work, a novel resin-based solid acid catalyst was obtained by condensation of furfuryl alcohol with furfural , and mild calcination and sulfonation process. Then it was used to convert sugars and biomass to obtain furan compounds. Results showed that the solid acid with a furfural to furfuryl alcohol molar ratio of 3:1 is an irregular mesoporous material , with a specific surface area of 134.18 m 2 /g and an acid content of 2.723 mmol/g, which is extremely stable below 200 °C. 82.2 % (from fructose), 15.8 % (from glucose), 10.0 % (from cellobiose) yields of 5-HMF and 35.5 % (from xylose) yield of furfural could be obtained at 160 °C for 2 h. It can be reused more than 5 times and can restore the best catalytic effect after re-sulfonation. Notably, in the catalytic conversion of rice husk, rice straw, camphor tree branch and leaves under typical reaction conditions, 5-HMF and furfural was in yields of 9.4–24.5 % and 20.3–47.9 %, respectively. Moreover, a 10 % water dropwise to solvent can effectively promote the catalytic conversion of biomass, while there is a significant inhibitory effect after it exceeds 20 %.