Decipher the Wavelength and Intensity Using Photothermoelectric Detectors

Broadband photodetectors that can decipher the wavelength (λ) and intensity (I) of an unknown incident light are urgently demanded. Photothermoelectric (PTE) detectors can achieve ultrabroadband photodetection surpassing the bandgap limitation; however, their practical application is severely hampered by the lack of deciphering strategy. In this work, we report a variable elimination method to decipher λ and I of the incident lights based on an integrated Ag2Se film-based PTE detector. Nanostructured Ag2Se films with controlled thickness are synthesized using an ion sputtering of Ag and a room-temperature selenization method and then assembled into a detector. Under identical illumination, Ag2Se films of different thicknesses produce varying output photothermal voltages, influenced by factors including λ. By establishing a direct relationship between the photothermal voltage and the absorption of Ag2Se films of varied thickness, we successfully eliminate variables independent of λ, thus determining λ. Subsequently, I is determined by the calibrated responsivity relationship using obtained λ. Our PTE detector achieves a broadband spectrum from 400 to 950 nm and high accuracy, with deviations as low as ∼2.63 and ∼0.53% for deciphered λ and I, respectively. This method allows for self-powered broadband decipherable photodetection without a complex device architecture or computational assistance, which could boost the research enthusiasm and promote the commercialization of PTE broadband detectors.