Mechanical properties and tensile failure behavior of SiCnf/SiC composites with multilayer interphases

SiC fiber-reinforced SiC ceramic matrix composites (SiC f /SiC CMCs) hold potential as thermal structural materials. In this work, SiC nanofibres were coated with multilayer interfaces by magnetron sputtering with the aim to tailor the fiber-matrix interface of SiC nanofibre reinforced SiC composites for superior mechanical properties. The influence of multilayer interface coating and sintering temperature on the density, microstructure, and mechanical properties of SiC nf /SiC CMCs fabricated via a hot-press technique employing ultra-long single-crystal SiC nanofibers as reinforcement were investigated. The composites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Transmission electron microscopy (TEM), and a universal testing machine. The prepared CMCs were toughened and strengthened by the observed fiber pull-out and bridging. The multilayered SiC nf /SiC CMCs with multiple interface coatings display an identifiable saw-tooth-like pattern in the load-displacement test, suggesting a significant improvement in the toughness of prepared materials through a laminated structure with weaker interface binding brought on by the thicker, denser coating. In comparison to the SiC nf /SiC composites without interface coating, the prepared SiC nf /SiC CMCs with PyC/SiAlC/ZrC interface layers revealed optimum flexural strength (520 ± 28.88 MPa, ↑46.5 %) and fracture toughness (9.95 ± 0.44 MPa m 1/2 , ↑94.7 %) after an hour of hot pressing at 1800 °C under pressure of 30 MPa. Besides an increase in relative density at high sintering temperatures (1850 °C), further grain coarsening deteriorated mechanical properties.