Preparation of carbon materials by vapor deposition with Fe3+-Modified nickel foam from biomass pyrolysis gas

Biomass carbon materials have attracted attention in various fields due to their excellent properties. In this study, CH 4 derived from biomass pyrolysis was utilized as a carbon source gas to synthesize carbon materials by chemical vapor deposition (CVD) in a two-stage reactor with purification system, with Fe 3+ -loaded nickel foam as the substrate under an argon atmosphere, using a self-designed experimental platform. The reaction process was optimized by examining the effects of the catalyst type, reaction temperature, reaction time, and gas flow rate on the structure and morphology of the carbon materials. The optimal preparation condition was to use FeCl 3 ethanol solution as catalyst, with CH 4 flow rate of 50 ml/min at 1000 °C for 25 min. The high quality carbon materials with uniform diameters (250–500 nm) were obtained on nickel foam substrate. The carbon materials obtained under optimal conditions were characterized and analyzed to investigate their excellent properties. Surface morphology and structure of as-formed carbon materials were characterized by SEM. The analysis of the XRD spectra and the Raman spectroscopy showed that the graphite diffraction peak (002) at 26.6°, the calculated intensity ratios for I D / I G and I 2D / I G were 0.257 and 0.545, respectively, indicated high degree of graphitization and purity of the carbon materials. Furthermore, the growth mechanism of carbon materials on the nickel foam substrate was discussed.