Crown ether-functionalized nanofiltration membranes with high ions selectivity for Li+/Mg2+ separation

ABSTRACT Extraction of lithium resources from salt lake brines is an effective method to solve the shortage of lithium resources nowadays. However, magnesium-lithium separation has become a critical issue for lithium extraction from salt lakes with high Mg 2+ /Li + ratio, due to the similar ionic characteristics of Li + (0.38 nm), and Mg 2+ (0.43 nm). Herein, a amine monomer containing crown ether group (4'-aminobenzo-15-crown-5-ether (NH 2 -B15C5)) was introduced into the interfacial polymerization (IP) process of piperazine (PIP) and homotrimethylene tricarbonyl chloride (TMC) to prepare polyamide (PA) nanofiltration (NF) membranes with Li + selective transport channels. NH 2 -B15C5 shows good compatibility and selective complexation to Li + , which acts as Li + selective transport channels effectively retaining Mg 2+ and allowing Li + to cross the membrane smoothly, therefore solving the problem of poor lithium-magnesium separation performance of most of the NF membranes currently. Molecular dynamics simulations (MD) also confirmed that NH 2 -B15C5 has a stronger affinity for Li + than for Mg 2+ . The NH 2 -B15C5/PIP-TMC membrane exhibited excellent separation performance and water permeance in simulated salt lake brine (2000 ppm, W Mg/Li =100), where the S Li, Mg and water permeance were 32.2 and 8.22 L·m -2 ·h -1 ·bar -1 . Importantly, the crown ether is introduced into the PA separator layer in the form of covalent bonds, hence showing excellent stability. Overall, an NF membrane with high lithium-magnesium separation performance was designed for the extraction of lithium resources from high Mg 2+ /Li + ratio salt lake brine.