已核实 DOI PubMed 相关产品: 19

Controllable Cyclic Wet Etching of Molybdenum at Room Temperature

Journal 2025 · IF 8.2 · 发表于 2025 年 6 月 24 日
作者: Haijun Cheng,Boao Ma,Lianfeng Hu,Sijie Gu,Yaqun Xia,Chun-Feng Hu,Xin-Ping Qu
阅读全文 在 PubMed 查看

摘要

A cyclic wet etching process for molybdenum (Mo) film utilizing ammonium persulfate (APS) solution at room temperature has been developed, enabling precise etching of the Mo film. The etch per cycle (EPC) of the Mo film was determined to be 0.3 nm/cycle in the 1 wt % APS solution. The surface roughness after the etching process was found to be lower than that of the as-deposited sputtered Mo film and had good consistency after multiple etching cycles. The lateral recess of the Mo layer in the Mo/SiO2 stack structures, as well as the controllable recess of the Mo nanowires, was successfully demonstrated. The controllable Mo etching by APS was due to a passivation–dissolution mechanism, which was supported by complementary measurements and density functional theory calculation.

本研究中使用的阿拉丁产品

19 款产品在本文中被引用