摘要
The selective oxidation of methanol to methyl formate is one of the most attractive processes to obtain value-added methanol-downstream products. The development of highly efficient and stable catalysts is critical for this transformation. In this study, a series of MIL-88B(Fe x ,Co 1– x ) bimetallic catalysts with different Fe/Co molar ratios were prepared through a one-pot hydrothermal method. X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, N 2 adsorption-desorption, and inductively coupled plasma-mass spectrometry characterization were performed to elucidate the structure of the catalysts. The activity of the catalysts were assessed in the one-step oxidation of methanol to methyl formate with H 2 O 2 in a liquid-phase batch reactor. The results show that the MIL-88B(Fe x ,Co 1– x ) catalysts exhibit uniform needle-like morphologies with an average length and width of 400–600 nm and 100–150 nm, respectively. Co 2+ is incorporated into the framework by partially replacing Fe 3+ in MIL-88B. Moreover, the catalyst efficiently promoted the conversion of methanol to methyl formate. When MIL-88B(Fe 0.7 ,Co 0.3 ) catalyst was used with a molar ratio of H 2 O 2 to methanol of 0.5 at 80 °C for 60 min, 34.8% methanol conversion was achieved, and the selectivity toward methyl formate was 67.6%. The catalysts also showed great stability with a steady conversion and selectivity even after four cycles. The preliminary oxidation mechanism was also studied. It was determined that H 2 O 2 is first adsorbed on the Fe 3+ sites and subsequently activates these sites. Methanol is adsorbed by the O atoms of the framework through hydrogen bonding and is gradually oxidized to formic acid . Subsequently, formic acid reacts with the residual methanol at the Fe 3+ and Co 2+ Lewis acid sites to form methyl formate.
危险品化学品经营许可证（带存储）