Simultaneous mitigation of disinfection by-product formation and odor compounds by peroxide/Fe(II)-based process: Combination of oxidation and coagulation

To remove disinfection by-product (DBP) precursors and mitigate odor compounds, peroxide (peroxymonosulfate and persulfate)/Fe(II)-based process was applied as a combination of coagulation and oxidation. Compared with traditional Fe-based salt coagulation (FeSO 4 and FeCl 3 ), peroxide/Fe(II)-based process was more efficient in dissolved organic carbon , UV 254 and turbidity removal, and peroxymonosulfate showed better performance than persulfate. The better coagulation performance arose from a combination of enhanced neutralization and different characteristics of flocs. Even though the combined process would increase the bromine substitution factor of DBPs, DBP formation and DBP-associated toxicity after peroxide/Fe(II)-based process were 9.2–38.8% and 5.2–27.2% lower than that after conventional Fe(III) coagulation. Both enhanced dissolved organic matter removal and oxidation of DBP precursors played vital roles in DBP control. Conventional Fe-based salt coagulation could hardly remove odor compounds (less than 10%, generally), whereas 28.2–84.9% of odor compounds were degraded during peroxide/Fe(II)-based process, due to free radical formation. This study demonstrated that PMS/Fe(II)-based process might be a promising treatment process for simultaneous DBP control and odor removal in source water.