Reductive Amination of 5-Hydroxymethylfurfural to 2,5-Bis(aminomethyl)furan over Alumina-Supported Ni-Based Catalytic Systems

Graphical Simply the best : 14 Secondary metals and 6 catalytic supports are screened to fabricated Ni-based 10NiMn(4 : 1)/γ-Al 2 O 3 catalyst with improved activity and stability for the reductive amination of 5-hydroxymethylfurfural to 2,5-bis(aminomethyl)furan, which is attributed to the electron transfer effect between active Ni particles and the well-dispersed MnO x on the γ-Al 2 O 3 support. Mono- and bimetallic Ni-based catalysts were prepared by screening 6 supports and 14 secondary metals for reductive amination of 5-hydroxymethylfurfural (5-HMF) into 2,5-bis(aminomethyl)furan (BAMF), among which γ-Al 2 O 3 and Mn were the best candidates. By further optimization of the reaction conditions at 0.4 g catalyst loading for 0.5 g substrate of 5-HMF and 160 °C of reaction temperature, 10Ni/γ-Al 2 O 3 and 10NiMn(4 : 1)/γ-Al 2 O 3 achieved the highest BAMF yields of 86.3 and 82.1 %, respectively. Although the BAMF yield values were comparable with that over Raney Ni, the turnover frequencies based on the initial BAMF yield and unit weight of Ni for 10NiMn(4 : 1)/γ-Al 2 O 3 , 10Ni/γ-Al 2 O 3 , and Raney Ni were calculated as 0.41, 0.09, and 0.04 h −1 , respectively. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy showed that the existence of MnO x well dispersed on the γ-Al 2 O 3 support and its electron transfer effect with Ni particles on the surface of the support contributed to the high efficiency and better recyclability for the five-time reused 10NiMn(4 : 1)/γ-Al 2 O 3 catalyst.