Zeolite/polyimide mixed-matrix membranes with enhanced natural gas purification performance: Importance of filler structural integrity

Mixed-matrix formulation is a promising method to overcome permeability-selectivity trade-off of polymers with incorporation of fillers with well-defined nanopores . The filler properties play a key role in determining the performance of mixed-matrix membrane (MMM). In this work, for the first time, we explored the critical effect of filler structural integrity on separation performance of MMM. Typically, micron as-synthesized, submicron as-synthesized and submicron ground SAPO-34 zeolites were incorporated into 6FDA-DAM polyimide , respectively. The interface compatibility between two phases was ensured by (3-aminopropyl) trimethoxysilane (APTMS) modification on SAPO-34 fillers. It was found that the directly synthesized micron and submicron fillers contributed to enhance the CO 2 /CH 4 separation performance whereas the submicron ground filler lowered the CO 2 permeability. Notably, incorporating 30 wt% micron as-synthesized SAPO-34 into 6FDA-DAM enhanced the CO 2 permeability by 68% and CO 2 /CH 4 by 37%, surpassing the performance upper-bound. Moreover, the hydrogen bonding between the filler and polymer matrix endowed the membrane with outstanding plasticization resistance with CO 2 partial pressure up to 20 bar. Adsorption isotherms and Maxwell model prediction revealed that the filler transport properties could be significantly affected by commonly-used methods of reducing the filler size. A decreased structural integrity was identified in the sequence of micron as-synthesized, submicron as-synthesized and submicron ground fillers. This work highlights the importance of a careful balance between structural integrity and crystal size of filler, and reliable routes to obtain nanofillers with desirable structural integrity as pursuing high-performing MMM toward practical application.