Energy-efficient treatment of refractory industrial effluent using flow-through electrochemical processes: Oxidation mechanisms and reduction of chlorinated byproducts

While flow-through anodic oxidation (FTAO) technique has demonstrated high efficiency to treat various refractory waste streams, there is an increasing concern on the secondary hazard generation thereby. In this study, we developed an integrated system that couples FTAO and cathodic reduction processes (termed FTAO-CR) for sustainable treatment of chlorine-laden industrial wastewater. Among four common electrode materials ( i.e. , Ti 4 O 7 , β -PbO 2 , RuO 2 , and SnO 2 -Sb), RuO 2 flow-through anode exhibited the best pollutant removal performance and relatively low ClO 3 and ClO 4 yields. Because of the significant scavenging effect of Cl − in real wastewater treatment, the direct electron transfer process played a dominant role in contaminant degradation for both active and nonactive anodes though active species ( i.e. , active chlorine) were involved in the subsequent transformation of the organic matter. A continuous FTAO-CR system was then constructed for simultaneous COD removal and organic and inorganic chlorinated byproduct control. The quality of the treated effluent could meet the national discharge permit limit at low energy cost (∼4.52 kWh m 3 or ∼0.035 kWh g 1 -COD). Results from our study pave the way for developing novel electrochemical platforms for the purification of refractory waste streams whilst minimizing the secondary pollution.