Preparation of poly(endo-norbornene derivatives) with ultra-high molecular weight by combining ROMP and acyclic metathesis reaction

Endo-norbornene derivatives are much cheaper and more accessible. However, it is difficult to prepare endo-polynorbornenes with ultra-high molecular weight (UHMW) by ring opening metathesis polymerization (ROMP) owing to the low activity. The molecular weight of poly(endo-NB-2OH)n could only reach to 309.1 kg mol−1 for 24 h via ROMP. While, UHMW poly(endo-NB-2OH)m was prepared by combining ROMP and acyclic metathesis reaction in much shorter time. The effects of residual monomer, amount of H2SO4, concentration, temperature and reaction time were investigated in depth. The UHMW P(endo-NB-2OH)m (Mn=2645.5 kg mol−1, PDI = 1.74) could be obtained at 80 °C for 5 min with H2SO4/G3 as 10/1 and concentration of 0.1 M. Moreover, UHMW P(endo-NBI-OH)m(Mn=1114.2 kg mol−1, PDI = 1.95) was also successfully prepared by this method. However, the H2SO4/G3 should increase to 30/1, and reacted for 45 min owing to the steric resistance of the cyclic dicarboximide. For P(exo-NBI-OH)n with lower activity, reaction time should prolong to 3 h to obtain UHMW P(exo-NBI-OH)m(Mn=1716.7 kg mol−1, PDI = 1.93). Finally, UHMW P(endo-NB-2alkyne)m, P(endo-NBI-alkyne)m, and P(exo-NBI-alkyne)m were successfully prepared via post-modification. Acyclic metathesis reaction is a robust and universal reaction to prepare other functional UHMW polynorbornenes, especially for the UHMW endo-polynorbornenes, which could not be prepared by ROMP efficiently.