Hydrophilization of porous polypropylene membranes by atomic layer deposition of TiO2 for simultaneously improved permeability and selectivity

The uses of porous polypropylene (PP) membranes are limited in water-based separations because of their strong hydrophobicity . To improve the separation performances of polypropylene membranes by hydrophilization, we deposited TiO 2 on their pore surface using the atomic layer deposition strategy with and without a pretreatment to the membrane by plasma. The direct deposition without plasma pretreatment led to slightly enhanced hydrophilicity because TiO 2 was slowly deposited on the membrane as discrete particles due to the lack of active groups on the bare polypropylene surface. In contrast, after a short exposure to plasma generated in air, oxygen-containing active groups were formed on the membrane and subsequent atomic layer deposition yielded conformal thin layer of TiO 2 on the pore walls. The deposited membranes showed remarkably enhanced hydrophilicity and higher deposition cycles led to stronger hydrophilicity. As a consequence of the enhanced hydrophilicity, the permeability and retention of the deposited membrane were simultaneously improved with big amplitudes. For example, an increase in pure water flux of ~60% and a more than doubled retention ratio were obtained by deposition of TiO 2 for 150 cycles on the plasma-activated polypropylene membrane. Furthermore, the TiO 2 -deposited membranes showed improved resistance to protein fouling compared to unmodified membranes also because of the enhanced hydrophilicity. Such a hydrophilization strategy of plasma pretreatment and subsequent atomic layer deposition of metal oxides is expected to be also effective in the upgrading of performances of other membranes with inert surfaces.