摘要
Foam concrete is often restricted by insufficient mechanical strength and poor durability, primarily due to the instability of precast foam. In this study, a super-stable foam was developed through in-situ polymerization of sodium acrylate (IPAANa), and its effects on the pore structure and performance of foam concrete were systematically investigated. The evolution of foam density, drainage, and bubble size demonstrated that IPAANa significantly enhanced foam stability compared with sodium acrylate (AANa) monomer and pre-polymerized sodium acrylate (PAANa). The improvement was attributed to interfacial adsorption of monomers and the formation of a three-dimensional polymer network via in-situ polymerization that increased viscosity and suppressed bubble coalescence and coarsening. When incorporated into foam concrete, the super-stable foam refined the pore structure, reduced interconnected porosity, and promoted the formation of a conformal polymer layer on pore walls. As a result, the compressive strength increased markedly, with the 28-day strength rising from 3.95 MPa to 5.87 MPa at the optimal IPAANa dosage. The water absorption ratio decreased by 71.6%, and carbonization resistance was substantially improved, with uncarbonated areas remaining after 28 days whereas the blank specimens were fully carbonated. These enhancements originated from synergistic effects of stabilized foams, refined pore structures, and the barrier effect of the polymer film. This study offered a novel strategy for fabricating high-performance foam concrete with promising applications in the construction sector.
危险品化学品经营许可证(带存储)