摘要
The growing demand for lithium resources necessitates efficient and sustainable extraction from salt-lake brine, a process significantly challenged by their low Li + concentration and high Mg/Li ratios. Adsorptive extraction using aluminum-based layered double hydroxides (LDHs) is promising but limited by modest capacity and structural instability during delithiation. To address this, a series of cation-doped Al-based LDHs were synthesized via a co-precipitation strategy. Comprehensive characterization demonstrated that Zn 2+ doping was most effective for elevating lithium adsorption capacity. It induced lattice expansion, increasing the (003) interplanar spacing from 0.744 nm to 0.767 nm, and significantly enhanced textural properties, and improved hydrophilicity (contact angle of 6.7°). Consequently, the optimal adsorbent, LDH-Zn, exhibited remarkable performance in Qarhan Salt Lake old brine. It achieved exceptionally high Li + /Na + and Li + /Mg 2+ selectivity of 1253 and 365, respectively. The Li + adsorption capacity reaches 10.03 mg/g, which is 31% higher than that of pristine LDH, with kinetics following a pseudo-second-order model. Remarkably, Zn 2+ doping drastically improved thermal and cyclic stability: the material retained 97% of its capacity after elongated delithiation of 6 h at a high temperature of 80 °C, and the granulated form exhibited less than 5% capacity loss over 20 adsorption-desorption cycles. 27 Al NMR spectroscopy confirmed the stabilization of the Al 3+ coordination environment. It is ascribed to the robustness of layered structure, weakening phase transformation. This work establishes cation doping as a potent strategy for developing high-performance, durable Al-based adsorbents for practical lithium recovery from high Mg/Li ratio brine.
危险品化学品经营许可证(带存储)