摘要
The advancement of 5G microwave technology creates increasing demand for compact, versatile devices capable of operating across various scenarios, which has driven the development of dielectric patch antennas. These innovative antennas successfully combine several key advantages: compact physical dimensions, lightweight construction, low-profile form factor, and extremely low dielectric loss - all while maintaining cost efficiency, enabling seamless integration with active components, and simplifying the packaging process. The ceramic substrate plays an absolutely essential role in it. In this study, MgTiO 3 -CaTiO 3 (MCT) ceramic substrates were prepared specifically for microstrip antenna applications using an aqueous gel casting technique. These substrates were then systematically compared with alternatives manufactured through conventional dry pressing methods. To optimize the key parameters, the process entailed a comprehensive analysis of multiple factors: the rheological behavior of the slurry at various solid loadings, the microstructural features obtained, and the dielectric properties across different sintering temperatures. Special attention was given to controlling the heating rate to prevent substrate deformation. The optimized MCT substrates demonstrated exceptional performance, achieving a quality factor ( Q×f ) of 74,213 GHz, a 6% improvement over dry-pressed samples, while simultaneously allowing a 45 °C reduction in sintering temperature. A MCT microstrip antenna was fabricated operating at 2.4 GHz. Electromagnetic simulation results showed its peak far-field gain was about 1.5 times greater than that of conventional FR4-based antennas. These findings conclusively demonstrated the practical effectiveness of aqueous epoxy systems for developing high-performance microstrip patch antennas (MPA) using MCT ceramic materials.
危险品化学品经营许可证(带存储)