摘要
To address the environmental accumulation of large-scale titanium gypsum waste generated during the titanium dioxide production process and promote CO 2 capture and utilization, this study proposes an efficient integrated strategy involving the simultaneous utilization of titanium gypsum and CO 2 . Specifically, titanium gypsum is converted in situ into hydrophobic nano-calcium carbonate (HNCC) through CO 2 mineralization for use in the reinforcement of epoxy resin (EP). In the synthesis process, titanium gypsum is mixed with sodium stearate, sodium hydroxide, and polyvinylpyrrolidone (PVP) solution, followed by CO 2 bubbling. The effects of CO 2 injection time, sodium stearate content, PVP content, and solid-liquid ratio on the synthesis of HNCC are systematically investigated to determine the optimal process conditions. The resulting HNCC exhibits uniform dispersion, with an average particle size of approximately 70 nm and a contact angle of 152.8°, indicating superhydrophobicity. HNCC is applied to enhance the mechanical and thermal properties of EP. When the HNCC loading is 10 wt%, the tensile strength, elongation at break, bending strength, and bending strain of the composite increase by 72.64%, 58.48%, 26.32%, and 50.00%, respectively, compared to pure EP. Additionally, the glass transition temperature, crosslinking density, and char yield of the composite increase by approximately 10 °C, 72.15%, and 51.75%, respectively. This approach not only provides an efficient route for the valorization of titanium gypsum waste but also presents a promising strategy for CO 2 capture and utilization.
危险品化学品经营许可证(带存储)