已核实 DOI 相关产品: 3

Advanced polyborosilazane-derived ceramic adhesives for high-temperature application: from precursors synthesis to preliminary performance evaluation

Journal 2026 · IF 6 · 发表于 2026 年 7 月 8 日
作者: Jing Xue,Gang Dong,Xuan Li,Lijuan Zhang,Yongzhao Hou,Jing Wang,Guangwu Wen
阅读全文 在 PubMed 查看

摘要

Polysilazane (PSZ) preceramics have attracted increasing attention as ceramic adhesives due to their good heat resistance. However, they still suffer from substantial release of small molecules and significant volume shrinkage during high-temperature pyrolysis. Here, a series of polyborosilazanes (PBSZ) with varying structures were synthesized by reacting PSZ with allyl-modified m-carborane (ASMC), which was prepared from n-butyllithium, vinyl chloride and m-carborane. The aim of this work is to develop a preceramic adhesive with high heat resistance, high ceramic yield and low volume shrinkage. With a Karstedt catalyst (KST) loading of 0.5 wt% and PSZ-to-ASMC weight ratio of 4: 1, the resulting liquid PBSZ (PBSZ-B1) exhibited a ceramic yield of 79.1 wt%, which is significantly higher than that of pristine PSZ (66.4 wt%), and could be directly used as a high-temperature adhesive. SiBON ceramics were directly bonded using PBSZ-B1, achieving maximum binding strength of 8.6 MPa at room temperature and 7.6 MPa at 800 °C high temperature. Mechanistic analysis revealed that chemical bonds such as B-C, B-N and C-N formed in PBSZ-B1 during heat treatment at 800 °C contributed to the enhanced binding strength of the joint. Stress distribution analysis of the joint showed that high stress concentration primarily occurred around the joint edges. Collectively, these results demonstrate that carborane-modified PSZ exhibits significant promise for high-temperature adhesive applications.

本研究中使用的阿拉丁产品

3 款产品在本文中被引用