摘要
An ingenious regional resistance design was first proposed in hydrovoltaic system. • The assembled device can simultaneously optimize hydrovoltaic current and voltage. • The enhanced mechanism is based on the increased current density at the interface. Evaporation-induced hydrovoltaic electricity generation based on the Debye screening effect represents a significant research subject in hydrovoltaic conversion due to its independence of additional power input, but usually suffering from low hydrovoltaic current and output power. In this work, we interestingly proposed a new concept to optimize hydrovoltaic current and voltage via an ingenious regional resistance design based on macro film device, without concentrating on material and structure. The hollow carbon nanospheres, a representative carbon material, was employed as the basis agent for hydrovoltaic conversion, and different carbonization temperature was implemented to acquire gradient resistance. To get partition functional device, the carbon nanospheres that with high resistance were laid at the wetting area to ensure efficient aggregation of charge carriers on solid-liquid interface, for generating reliable potential, while the nanospheres with low resistance were scraped at the non-wetting area that far from the liquid level to promote the transfer of accumulated charges to allow high current. As a result, this assembled device acquires the both advantages of two separated units, which inherits the high hydrovoltaic voltage (∼0.5 V) derived from the high resistance area and the competitive current (∼1.3 μA) from the low resistance one. The output power of this composite film has revealed ∼137 times higher than that of single device constructed by the carbon nanospheres with low resistance. As expected, the COMSOL simulation results verified the key function of the lapped interface on enhancing current density between high resistance and low resistance area. Download: Download high-res image (411KB) Download: Download full-size image
危险品化学品经营许可证(带存储)