3D-Printed PMMA-Regulated PAN-Based Gel Polymer Electrolytes for Lithium Metal Batteries

Gel polymer electrolytes (GPEs) have emerged as promising electrolytes for lithium metal batteries owing to their high ionic conductivity, mechanical flexibility, and reduced risk of electrolyte leakage. However, PAN-based GPEs still suffer from limited ion transport caused by the semi-crystalline structure of PAN chains. In this work, polyacrylonitrile (PAN)/poly(methyl methacrylate) (PMMA)/lithium aluminum titanium phosphate (LATP)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) gel polymer electrolytes were fabricated via direct ink writing (DIW) 3D printing, where PMMA was introduced to regulate the PAN matrix and enhance Li+transport. The results reveal that PMMA incorporation effectively reduces PAN crystallinity, increases the amorphous fraction, and modifies the local functional-group environment of the polymer matrix, while LATP fillers further improve ionic transport and mechanical stability. The optimized PPM8:2 gel polymer electrolyte delivers a room-temperature ionic conductivity of 4.22 × 10−4S cm−1, a Li+transference number of 0.624, and an electrochemical stability window of 4.75 V. When applied in LiFePO4|Li batteries, it maintains a discharge capacity of approximately 150 mAh g−1after 100 cycles at 0.1 C with excellent rate capability and cycling stability. This work provides an effective approach to developing PAN-based gel polymer electrolytes for high-performance lithium metal batteries.