摘要
● A SnO 2 /CuO sensor was fabricated, achieving an ultrafast 3 s response to CO. ● First-principles confirm heterojunctions greatly boost stability and moisture resistance. ● The proposed device is highly promising for lithium-ion battery safety monitoring. Carbon monoxide (CO) is a major harmful gas emitted by industry and a typical gas causing air pollution, which damages the natural environment and threatens human health. Therefore, it is of great practical significance to design a CO sensor with fast response speed and high sensitivity. In this paper, a composite sensor material of SnO 2 and CuO was prepared by a hydrothermal method, and the SnO 2 /CuO sensor was constructed. The morphology and phase structure of the SnO 2 /CuO composite were analyzed by XRD, SEM, and XPS, and the sensing properties of the SnO 2 /CuO sensor toward CO were studied experimentally. The optimal doping ratio of the SnO 2 /CuO sensor is 10%, and the optimal working temperature for detecting CO is 280 °C. The SnO 2 /CuO (10%) sensor has a response value of 3.5 for 200 ppm CO, short response, and recovery times (3 s/27 s), and a detection range of 5–1000 ppm for CO. The SnO 2 /CuO (10%) sensor exhibits excellent long-term baseline resistance stability, and its moisture resistance has been significantly improved compared to pure SnO 2 sensors, demonstrating outstanding sensing performance. Supported by first-principles calculations and sensing mechanism modeling, it was revealed that the enhancement in gas-sensing performance primarily originates from the formation of heterojunctions between SnO 2 and CuO. In this study, the proposed sensor demonstrates tremendous potential for early gas warning in lithium-ion battery thermal runaway. Download: Download high-res image (161KB) Download: Download full-size image
危险品化学品经营许可证(带存储)