RUSSIAN JOURNAL OF GENERAL CHEMISTRY
·
2021
·Vol. 91
·期 4
·726-731
·
IF 0.868
Xu Y.,Hu Y.,Bao Q.,Zhang J.,Liu B.,Zhang Z.,Zhang Q.,Zhang H.
Copper phyllosilicate has been synthesized from a solution of sodium silicate and copper nitrate by co-precipitation under acidic conditions followed by reduction under H 2 flow for using it as the Cu/SiO 2 catalyst. The catalyst has been characterized by XRD, XPS, FTIR and Raman spectra, EDS, BET, and TEM. It is confirmed that only copper phyllosilicate and SiO 2 exist in the catalyst precursor, and there has been no CuO. Physical and chemical properties of Cu/SiO 2 catalyst have been evaluated. The Cu/SiO 2 catalyst has not only a large specific surface area and abundant mesopores but also the advantages of high dispersion of copper nanoparticles and the combination of Cu 0 and Cu + . The catalyst demonstrates high activity and selectivity in the reaction of 2-butanol dehydrogenation to methyl ethyl ketone.
研究领域:
催化化学
·
材料科学
·
物理化学
·
纳米材料
·
有机合成
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2020
·Vol. 8
·期 28
·14162-14170
·
IF 11.301
Zhihong Du,Keyun Li,Hailei Zhao,Xu Dong,Yang Zhang,Konrad Świerczek
Modified by Sm0.2Ce0.8O2−δ (SDC) nanoparticles (NPs), SmBaCo2O5+δ (SBCO) double perovskite oxide is evaluated as a promising cathode material for intermediate temperature solid oxide fuel cells. The SDC NPs are epitaxially grown on the surface of SBCO with (220) planes of SDC aligning smoothly to (020) or (100) planes of SBCO, forming a tight, coherent connection at the interface. The influence of this modification on thermal expansion, oxygen diffusion, electrical conductivity and electrochemical properties is investigated thoroughly in this work. The designed SBCO–SDC cathode material demonstrates a lower thermal expansion coefficient (TEC), ∼16.4 × 10−6 K−1, than that of the unmodified SBCO, ∼20.9 × 10−6 K−1. While SDC coating results in a decreased total electrical conductivity, it facilitates oxygen bulk diffusion and improves the surface exchange reaction kinetics. Coating with SDC NPs can accelerate the rate-determining process of dissociation of the absorbed molecular oxygen, especially at intermediate temperatures. Accordingly, the constructed symmetrical cell with the La0.8Sr0.2Ga0.8Mg0.2O3−δ (LSGM) electrolyte shows lower polarization resistance values, if the SBCO–SDC cathode is utilized. Also, the LSGM electrolyte-supported (300 μm) full cell is found to deliver a high power density of 800 mW cm−2 at 800 °C. Owing to the strong and coherent interfacial connection, the developed cathode demonstrates a relatively steady electrochemical performance.
研究领域:
材料科学
·
能源化学
·
电化学
·
无机功能材料
·
燃料电池技术
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2020
·Vol. 46
·期 10
·16524-16532
·
IF 3.83
Muhammad Yousaf,Asma Noor,Shuai Xu,Majid Niaz Akhtar,Baoyuan Wang
Yttrium iron garnet (YIG) nanoparticles (NPs) doped with rare earth (RE) metal ions (Y 2.5 Sm 0.5 Fe 5 O 12 , Y 2.5 Nd 0.5 Fe 5 O 12 ) were successfully synthesized by sol-gel auto combustion approach. The cubic crystalline structure and morphology of the prepared garnet ferrite NPs were analyzed by X-ray diffractometer (XRD) and field emission scanning electron microscopy (FESEM). The cubic crystalline garnet phase of the synthesized YIG, Sm-YIG and Nd-YIG samples was successfully achieved at 950 °C sintering temperature . The force constant and absorption bands were estimated by using Fourier transform infrared spectroscopy (FTIR). The doping effect of RE metal ions on the chemical states of YIG were examined by x-ray photoelectron microscopy (XPS). The valence band (from 12.63 eV to 13.22 eV), conduction band (from 10.89 eV to 11.34 eV) edges and optical bandgap values of RE doped YIG samples were calculated using UV–Vis spectroscopy and ultraviolet photo electron spectroscopy (UPS). The magnetic analysis of the prepared NPs was studied using vibrating sample magnetometer (VSM). The XPS analysis of RE doped YIG samples exhibit the existence of RE (Sm +3 , Nd +3 ) contents on the surface of YIG ferrite by decreasing the oxygen lattice in garnet structure. The optical bandgap (from 1.74 eV to 1.88 eV) explains the semiconducting nature of the synthesized NPs. The UPS results confirm the valence band position of YIG doped samples. The saturation magnetization and remanence of RE doped garnet ferrite samples increased from 13.45 to 18.83 emu/g and 4.06–6.53 emu/g, respectively.
研究领域:
材料科学
·
纳米科技
·
固体物理
·
无机化学
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2015
·Vol. 133
·期 1
·
IF 1.768
Yao Zhou,Jinliang He,Jun Hu,Bin Dang
Polypropylene (PP)/polyolefin elastomer (POE) blends and MgO/PP/POE nanocomposites were fabricated by melt blending. The morphology, mechanical, and electrical properties of the nanocomposites were investigated. Scanning electron microscopy showed that the surface-modified MgO nanoparticles were well dispersed in the polymer matrix at low loadings of less than 3 phr. X-ray diffraction demonstrated that the crystalline phases of PP in the composites were changed and that the β phase significantly increased. An examination of the electrical properties revealed that the direct-current (dc) electric breakdown strength and space-charge suppression effect were remarkably improved by the introduction of the surface-modified MgO nanoparticles. In addition, obvious enhancements in the tensile modulus and strength were obtained as a result of the synergistic toughening of the POE and MgO nanoparticles. Thus, MgO/PP/POE nanocomposites with enhanced mechanical and electrical properties have great potential to be used as recyclable insulation materials for high-voltage dc cables with large transmission capacities and high operating temperatures. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132 , 42863.
研究领域:
高分子材料科学
·
电气工程材料
·
纳米复合材料
·
介电物理
·
绝缘材料
✓ 已验证
DOI
高影响因子
Advances in Materials Science and Engineering
·
2018
·Vol. 2018
·期 1
·7252809
·
IF 1.372
Van-Tuan Mai,Quang-Bac Hoang,Xuan-Dung Mai
Cost-effective methods for preparing ZnO nanostructures are of importance for the deployment of ZnO in many applications including n-type conduits, catalysts, nanophosphor, and optoelectronics. Herein, we present a room-temperature sol-gel method with the aid of ultrasonication to prepare white-emitting ZnO nanoparticles (NPs). X-ray diffraction and electron microscopic analyses revealed that the size and shape of ZnO NPs can be controlled simply by changing the concentration of the Zn precursor. The ZnO NPs had a broad photoluminescence emission, ranging from 450 nm to 800 nm, while their composite in PMMA matrix showed an enhancement in the red region induced by ZnO-PMMA interfacial band-bending effects. The results demonstrated herein promise a simple tool for control over size, shape, and emission of ZnO materials for diverse applications.
研究领域:
材料科学
·
纳米技术
·
光电子学
·
高分子化学
·
发光材料
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2011
·
IF 3.723
Hui Wang,Yuming Huang
Prussian-blue (PB)-modified γ-Fe 2 O 3 magnetic nanoparticles (PBMNPs) were successfully synthesized based on electric interactions between negatively charged [Fe(CN) 6 ] 4− and positively charged γ-Fe 2 O 3 nanoparticles. The in situ PB coating was generated by the coordinating reaction between the adsorbed [Fe(CN) 6 ] 4− and the ferric ions on the surface of γ-Fe 2 O 3 NPs. The as-prepared PBMNPs were characterized by FT-IR, XRD, TEM, and used to remove organic pollutants from aqueous solution, namely, using methylene blue (MB) as model compound. The experimental results showed that the target compound could be removed efficiently from solution over a wide pH range from 3 to 10 in the presence of PBMNPs as peroxidase-like catalyst and H 2 O 2 as oxidant. Under optimal conditions, MB could be removed completely after 120 min of reaction at 298 K; the chemical oxygen demand (COD) removal efficiency and the total organic carbon (TOC) abatement efficiency were 53.6% and 35%, respectively. Furthermore, the PBMNPs catalysts showed high magnetization, temperature tolerance, long-term storage and operational stability, and they could be readily separated from solution by applying an external magnetic field. Finally, a possible reaction mechanism for MB degradation was also discussed.
研究领域:
环境科学
·
纳米材料学
·
催化化学
·
水处理技术
·
环境功能材料
✓ 已验证
DOI
高影响因子
Small
·
2024
·Vol. 21
·期 5
·2408929
·
IF 13
Xue Jiao Zhao,Zhi Hao Zhao,Zhong Lin Wang,Guang Zhu,Jie Wang
Triboelectric nanogenerators (TENGs), among the most simple and efficient means to harvest mechanical energy, have great potential in renewable energy utilization. While the output performance of TENGs is still not high enough, which limits its practical application. Here, a poly(vinylidene fluoride) (PVDF)/fluorinated ethylene propylene nanoparticles (FEP NPs) porous nanofiber (PFPN) membrane with waterproof, breathable, surface superhydrophobic and high tribo-negative properties is proposed for achieving high-performance of TENGs. The PFPN-based solid–solid contact PFPN-TENG achieved an optimal electric output with a net tribo-charge density of 294 µC m −2 , which is 42.2% more than that of polytetrafluoroethylene (PTFE) film. The PFNP membrane can maintain the best performance with almost no attenuation after 142680 working cycles. Based on its excellent triboelectric characteristics, the PFPN membrane shows its excellent performance for self-powered body motion sensing and mechanical energy harvesting. A flexible solid–liquid contact PFPN-TENG can achieve high electrical output with an average volume power density of ≈544.1 W m −3 by harvesting water wave energy. Such excellent performance of the PFPN membrane makes it a potential candidate to promote the power density of TENGs in harvesting blue water wave energy.
研究领域:
纳米能源材料
·
柔性电子学
·
生物医学工程
·
可穿戴设备
·
环境能量收集
✓ 已验证
DOI
高影响因子
RSC Advances
·
2014
·Vol. 5
·期 8
·5604-5610
·
IF 3.708
Mei Yu,Jindan Zhang,Songmei Li,Yanbing Meng,Jianhua Liu
The performances of photovoltaic devices can be improved by increasing light-harvesting and charge collection respectively. The design and synthesis of nanocomposites with the ability of enhancing the generation and collection of the photo-generated electrons provide a significant way to improve the power conversion efficiency (PCE). Herein, SWNTs@(TiO2/Ag/Au) nanocomposites were synthesized and successfully integrated into photoanode films of dye-sensitized solar cells (DSSCs) to improve the power conversion efficiency. The synthesis processes were based on multi-functional DNA. DNA not only works as a dispersing agent preventing SWNTs bundling but also as a sacrificial mold assembling TiO2, Ag and Au nanoparticles on the surface of the SWNTs. The synthesized SWNTs@(TiO2/Ag/Au) nanocomposites enhance the charge collection and light-harvesting of DSSCs simultaneously. With 2.45 wt% SWNTs@(TiO2/Ag/Au) nanocomposites incorporating into the photoanode films, the PCE of the DSSCs increases from 6.8% to 8.3%.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
光伏器件
·
表面科学
·
胶体与界面化学
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2013
·
IF 4.675
Ying Yang,Pengfei Yi,Conghua Zhou,Jiarui Cui,Xiaolu Zheng,Si Xiao,Xueyi Guo,Wenyong Wang
In this work we investigate novel, agarose-based polymer electrolyte that is modified by magnetic NiO nanoparticles for solid-state dye-sensitized solar cells (DSSCs) applications. After proper treatment under an external magnetic field , the agarose electrolyte exhibits increased ionic conductivity and better penetration into the mesoporous TiO 2 photoanode film, which improves the power conversion efficiency of the DSSCs. Electrochemical impedance spectroscopy measurement is also performed to analyze the magnetic field effect on cell performance. After applying proper magnetic filed intensity, the recombination resistance and redox transport resistance in the devices are improved. This method can be possibly applied to other solid-state electrolyte materials to improve their performance and can lead to more efficient DSSCs.
研究领域:
材料科学
·
能源化学
·
纳米科技
·
光电功能材料
·
可再生能源
·
电化学
✓ 已验证
DOI
高影响因子
CEMENT & CONCRETE COMPOSITES
·
2022
·
IF 9.93
Xing Ming,Qing Liu,Miaomiao Wang,Yongqing Cai,Binmeng Chen,Zongjin Li
Chloride-induced corrosion in reinforced concrete is a primary durability issue that causes large economic loss every year. To improve the intrinsic chloride binding capacity and realize a favorable corrosion protection of cement-based materials are thus crucial to prolong the service life of concrete structures. Here, alumina nano particles (ANPs) were incorporated to improve the chloride binding capacity of cement pastes in chloride solutions and the anti-corrosion performance of mortars under accelerated corrosion process. The ANPs facilitated the formation of alumino-ferrite-mono (AFm)-type phases, thereby improved the content of chemically bound chlorides. Solution calcium (Ca) ions benefited the chloride captured by calcium-(alumino-)silicate-hydrates (C-(A-)S-H) in the assistance of ANPs, especially at high initial chloride concentrations , and further evoked a pH-related chloride binding response. Moreover, the enhanced corrosion resistance was finally realized by incorporating appropriate amount of ANPs because of the filling and chemical effects induced low permeability of mortars. In general, the ANPs possess dual functions in the aspects of chloride binding and corrosion inhibition . These findings are expected to advance the design of high-durable cement-based materials serviced in the marine environment.
研究领域:
建筑材料
·
土木工程材料
·
腐蚀科学
·
纳米材料应用
·
混凝土耐久性
✓ 已验证
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES
·
2014
·
IF 2.694
Guihua Ruan,Meiping Wei,Zhengyi Chen,Rihui Su,Fuyou Du,Yanjie Zheng
A novel large-volume immobilized enzyme reactor (IMER) on small column was prepared with organic–inorganic hybrid silica particles and applied for fast (10 min) and oriented digestion of protein. At first, a thin enzyme support layer was formed in the bottom of the small column by polymerization with α-methacrylic acid and dimethacrylate. After that, amino SiO 2 particles was prepared by the sol–gel method with tetraethoxysilane and 3-aminopropyltriethoxysilane. Subsequently, the amino SiO 2 particles were activated by glutaraldehyde for covalent immobilization of trypsin. Digestive capability of large-volume IMER for proteins was investigated by using bovine serum albumin (BSA), cytochrome c (Cyt- c ) as model proteins. Results showed that although the sequence coverage of the BSA (20%) and Cyt- c (19%) was low, the large-volume IMER could produce peptides with stable specific sequence at 101–105, 156–160, 205–209, 212–218, 229–232, 257–263 and 473–451 of the amino sequence of BSA when digesting 1 mg/mL BSA. Eight of common peptides were observed during each of the ten runs of large-volume IMER. Besides, the IMER could be easily regenerated by reactivating with GA and cross-linking with trypsin after breaking the –C N– bond by 0.01 M HCl. The sequence coverage of BSA from regenerated IMER increased to 25% comparing the non-regenerated IMER (17%). 14 common peptides. accounting for 87.5% of first use of IMER, were produced both with IMER and regenerated IMER. When the IMER was applied for ginkgo albumin digestion, the sequence coverage of two main proteins of ginkgo, ginnacin and legumin, was 56% and 55%, respectively. (Reviewer 2) Above all, the fast and selective digestion property of the large-volume IMER indicated that the regenerative IMER could be tentatively used for the production of potential bioactive peptides and the study of oriented protein digestion.
研究领域:
生物化学
·
分子生物学
·
蛋白质组学
·
酶工程
·
生物材料
✓ 已验证
DOI
高影响因子
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2014
·Vol. 16
·期 23
·11584-11589
·
IF 4.198
Yunyun Huang,Wensheng Lin,Kan Chen,Wenkai Zhang,Xudong Chen,Ming Qiu Zhang
A water-processable blue fluorescent silver nanoparticle@graphene–polymer composite (Ag@G–pNIPAM) consisting of graphene coated with a thermally responsive poly-(N-isopropylacrylamide) (pNIPAM) shell is prepared. The pNIPAM shell swells or collapses as a function of temperature, serving as a means to trap silver nanoparticles in solution and get them sufficiently close to the graphene core to provide fluorescence enhancement based on the local surface plasmon resonance (LSPR) effect. The unique thermoresponsive properties and high enhancement ratio of the material should find application in solution fluorescence enhancers and a variety of biomedical applications, such as cellular uptake, sensing and imaging.
研究领域:
纳米医学
·
生物材料
·
分子影像学
·
生物传感
·
药物递送系统
✓ 已验证
DOI
高影响因子