LANGMUIR
·
2018
·
IF 3.789
Yongxian Guo,Jie Lu,Qi Kang,Ming Fang,Li Yu
Supramolecular materials assembled by amide-functionalized surface active ionic liquid, N-dodecyl-N′-acetamido imidazolium bromide ([C12ImCONH2]Br), and europium-containing polyoxometalates (Eu-POM) were fabricated in aqueous solution by a one-step method via ionic self-assembly strategy. The [C12ImCONH2]Br/Eu-POM supramolecular structures exhibit favorable fluorescence properties and represent a 15-fold increase in quantum yield (∼13.68%) compared to Eu-POM. Besides, more fluorescence was quenched obviously with the increasing concentration of dopamine (DA) (within the range of 0–100 μM), based on which DA monitoring could be achieved. The detection limit was identified to be 0.1 μM. The supramolecular nanoparticles are highly specific for the detection of DA. In addition, the hybrid assemblies display not only low cytotoxicity but also excellent biocompatibility to MC3T3-E1 cells. As a result, as-prepared supramolecular materials with these superior properties show the promising application in some fields such as biochemistry and biomedical science.
研究领域:
材料科学
·
分析化学
·
生物医学工程
·
生物化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2021
·
IF 7.328
Jing Zheng,Naureen Rahman,Longfei Li,Jingshuang Zhang,Haozhe Tan,Yun Xue,Yu Zhao,Jiliang Zhai,Nana Zhao,Fujian Xu,Liqun Zhang,Rui Shi,Yuri Lvov,Jiajia Xue
It is of great significance to develop osteoinductive artificial scaffold for bone repair and regeneration. We constructed a biomimetic apatite interface on electrospun polycaprolactone fibers by combining layer-by-layer (LbL) nanocoating with mineralization to fabricate an osteoinductive artificial scaffold. After polydopamine modification, cationic type-І collagen and anionic chondroitin sulfate were sequentially adsorbed on the fiber surface. The fibers coated with the multilayer components served as the precursor matrix to induce apatite deposition. By adjusting the number of the layers and duration of mineralization, the nanoscale morphology of composite fibers was optimized. When ten bilayers of the collagen and chondroitin sulfate were deposited onto the fibers followed by one day-mineralization, the obtained polycaprolactone–apatite composite scaffolds significantly promoted the adhesion, proliferation, and osteogenic differentiation of MC3T3-E1 cells. In a subcutaneous implantation in mice, this composite fiber membrane enhanced in vivo ectopic osteogenesis. Our nano-architectural scaffolds were able to mimic the composition and structure of the bone matrix to a certain extent, holding great potential for bone repair and regeneration.
研究领域:
生物材料
·
组织工程
·
生物医学工程
·
骨再生
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Shiyuan Fan,Yi Wan,Zihe Zhao,Hongwei Wang,Zhenbing Ji
A current, gradually growing trend is to use bioactive ceramics to develop new bone scaffolds to replace traditional bone implants. Biphasic calcium phosphate (BCP), a mixed material of hydroxyapatite and tricalcium phosphate, has limited osseointegration ability. Therefore, improving the bioactivity and osteoinductive ability of BCP scaffolds through various surface modification methods is an important issue. Polydopamine (PDA) coating, chitosan (CS) coating, and their composite coatings have been previously reported to individually possess a good ability to improve scaffold bioactivity, but few comparisons between them and the optimal coating sequence of PDA and CS have been reported. Herein, we fabricated a BCP scaffold by using a self-made 3D printer, sintered the scaffold, and then prepared PDA, CS, PDA/CS and CS/PDA coatings by solution immersion. Afterwards, the surface morphology , element composition and proportion, compressive strength and surface contact angle of the five groups of scaffolds were characterized. Finally, the adhesion, proliferation and osteogenesis-related gene expression levels of MC3T3-E1 on the five groups in vitro were evaluated in detail. The results showed that the five types of scaffolds were fabricated successfully and that the PDA/CS and CS/PDA coatings had different surface morphologies. The compressive strengths of the composite-coating groups were higher than those of the single-coating groups and the BCP group. The CCK-8 experiment revealed that the composite coatings can promote the initial adhesion and proliferation of cells. The detection results of three osteogenesis-related genes (OCN, COL-1 and Runx-2) proved that the composite coatings had a synergistic effect in promoting osteodifferentiation and that the CS/PDA coating had the greatest effect in improving cell viability and promoting osteogenic differentiation.
研究领域:
生物材料
·
组织工程
·
骨科
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2022
·
IF 8.025
Shuoshuo Yang,Guoqi Ni,Mengyang Xia,Hailing Li,Zhonghong Gao
Oxidative stress is associated with most traumatic or pathological bone defects, and seriously affects the effect of implantation. The construction of antioxidative and osteogenic coatings is of great significance to accelerate the bone regeneration of implants. In this study, baicalein (BAI), a nature flavonoid drug, was loaded in bovine serum albumin (BSA) by desolvent method to prepare BAI-BSA composite protein, and tannic acid (TA)/BAI-BSA coatings were further built via layer by layer self-assembly technology. BAI-BSA possesses good biocompatibility that showed no cytotoxicity to osteoblasts and erythrocytes, and helps to enhance the activity of alkaline phosphatase (ALP) and promote the formation of osteogenic mineralized calcium nodules. After assembled with TA, BAI-BSA coating significantly promoted cell adhesion and in vitro osteogenic mineralization of MC3T3-E1. Moreover, BAI drug loading improved the antioxidative function of BSA coatings effectively. The scavenging rates of (TA/BAI-BSA-10) 4 for ABTS +• and DPPH • free radicals were 69.6 ± 16.1 % and 53.4 ± 2.4 %, respectively. At cellular level, the TA/BAI-BSA coating effectively inhibited the impact of oxidative stress on the oxidative damage of osteoblasts. The drug-loaded protein coatings possess both great antioxidative and osteogenic functions, which have important potential in the field of bone repair.
研究领域:
材料科学
·
生物医学工程
·
药学
·
组织工程
·
骨科
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2020
·
IF 6.155
Hui Liu,Rui Liu,Ihsan Ullah,Shuyuan Zhang,Ziqing Sun,Ling Ren,Ke Yang
Implant-related infection and early bone integration are the main risk factors of implants for long-term service, to overcome these difficulties, SLA-TiCu surface was prepared by sandblasting and large-grits etching (SLA) treatment on a novel antibacterial titanium-copper alloy (TiCu), which is the most prevalent surface treatment with micro/submicron hierarchical structures to titanium-based implants. Effects of SLA-TiCu surface on the adhesion, proliferation, apoptosis and differentiation of MC3T3-E1 cells as well as the antibacterial activity against a common orthopedic pathogen ( Staphylococcus aureus ) were studied. Compared to the following surfaces: sandblasting and large-grits etched pure titanium (SLA-Ti), mechanically ground pure titanium and TiCu alloy (M-Ti and M-TiCu), these results indicated that SLA-TiCu surface obviously enhanced the bone-related gene expressions (alkaline phosphates (ALP), collagen type I (COL I), Runt-related transcription factor 2 (RUN × 2), and osteopontin (OPN)). Moreover, SLA-TiCu surface could maintain a sustainable release of Cu 2+ ions and effectively inhibited the viability of bacteria. This study demonstrated that SLA-TiCu surface possessed multifunctional characteristics of improved osteogenic ability and antibacterial activity, making it promising as a novel implant material for hard tissue repairs such as orthopedics and dental implants .
研究领域:
材料科学
·
生物材料
·
骨科
·
牙科
✓ 已验证
产品关联
DOI
高影响因子
BIOMATERIALS
·
2020
·
IF 10.317
Zhijian Yang,Yue Xi,Jun Bai,Zhiwei Jiang,Shuqin Wang,Haolan Zhang,Wei Dai,Chaozhen Chen,Zhongru Gou,Guoli Yang,Changyou Gao
The dual functional implants of antibacteria and osteointegration are highly demanded in orthopedic and dentistry, especially for patients who suffer from diabetes or osteoporosis simultaneously. However, there is lack of the facile and robust method to produce clinically applicable implants with this dual function although coatings possessing single function have been extensively developed. Herein, hyperbranched poly-L-lysine (HBPL) polymers were covalently immobilized onto the alkali-heat treated titanium (Ti) substrates and implants by using 3-glycidyloxypropyltrimethoxysilane (GPTMS) as the coupling agent, which displayed excellent antibacterial activity against S. aureus and E. coli with an efficiency as high as 89.4% and 92.2% in vitro , respectively. The HBPL coating also significantly promoted the adhesion, spreading, proliferation and osteogenic differentiation of MC3T3-E1 cells in vitro . Furthermore, the results of a S. aureus infection rat model in vivo ulteriorly verified that the HBPL-modified screws had good antibacterial and anti-inflammatory abilities at an early stage of implantation and better osteointegration compared with the control Ti screws.
研究领域:
生物材料
·
生物医学工程
·
骨科
·
牙科
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2018
·
IF 3.997
Shengnan Wang,Yuanyi Yang,Yunfei Li,Jiacheng Shi,Jianshu Zhou,Li Zhang,Yi Deng,Weizhong Yang
Polyetheretherketone (PEEK)-based implants have become popular in hard tissue orthopedic and dental field. However, its inherent bio-inertness limited its applications for bone repair/substitution of osteoporosis patients, with poor osteogenesis capability. In order to ameliorate their bioactivity, the 3D porous PEEK substrate was created by sulfonate processing, and the substrate was subsequently incorporated with strontium (Sr) through a hydrothermal reaction in Sr(OH) 2 solutions. The adiponectin (APN) protein membrane was deposited on the substrate via polydopamine-assisted deposition. Surface characterization results disclosed that the nanostructures had been formed on sPEEK-Sr-APN surafces, and APN coatings on the substrates could adjust Sr release rate and further mediate cell-material interactions. in vitro experiments indicated that the cellular effects (proliferation and differentiation) of MC3T3-E1 were significantly increased with Sr/APN coordinated regulation. This study provides bioactive Sr and APN as promising active components for bio-functional bone regeneration/substitution, and optimizes the osteointegration of PEEK implants in clinic.
研究领域:
生物材料
·
骨科
·
牙科科学
·
生物医学工程
·
组织工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nano Research
·
2024
·
IF 9.5
Wang Aoao,Ma Xinbo,Yang Yafeng,Shi Guoliang,Han Liwei,Hu Xiantong,Shi Rui,Yan Jun,Guo Quanyi,Zhao Yantao
The initial healing stages of bone fracture is a complex physiological process involving a series of spatially and temporally overlapping events, including pathogen clearance, immunological modulation, and osteogenesis. In this study, we have developed a piezoelectric and aligned nanofibrous scaffold composed of ZnO@PCL/PVDF with multiple antibacterial, immunomodulatory, and osteogenic effects using electrospinning technology. This scaffold’s piezoelectric signal output under ultrasound (US) control can be similar to the physiological electrical signals of healthy bone tissue, creating a truly biomimetic electrical microenvironment in the bone defect. In vitro studies have shown that ZnO@PCL/PVDF scaffold significantly enhances the proliferation, migration, and osteogenic differentiation of MC3T3-E1 cells under piezoelectric drive provided by ultrasound. Furthermore, the scaffold exhibits inhibitory effects on the growth of E. coli and S. aureus , as well as the ability to induce M2 macrophage polarization, indicating potent antibacterial and immunomodulatory properties. In vivo experiments demonstrated that the ZnO@PCL/PVDF scaffold can accelerate the repair of mandibular defects in rats, effectively inhibit bacterial colonization, and reduce inflammatory responses. Altogether, this study confirms that the newly developed ZnO@PCL/PVDF scaffold effectively promotes bone repair by truly mimicking the endogenous electrical microenvironment and precisely regulating the temporospatial disorders of initial bone healing, thus providing a simple and effective solution for bone defects.
研究领域:
生物医学工程
·
材料科学
·
再生医学
·
生物材料
·
骨科
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2020
·Vol. 137
·期 38
·49157
·
IF 2.52
Zhangyu Ma,Linlong Li,Xincui Shi,Zongliang Wang,Min Guo,Yu Wang,Zixue Jiao,Congxiao Zhang,Peibiao Zhang
Polyetheretherketone (PEEK) is a promising bone and dental tissue engineering material with excellent mechanical properties and biocompatibility, but its biological inertness deficiency limits its clinical applications. In this study, poly(sodium p-styrene sulfonate) (pNaSS) was grafted onto PEEK surface by ultraviolet (UV) induced polymerization to enhance its osteogenic activities. Attenuated total reflectance Fourier transformed Infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), and contact angle (CA) analysis were carried out to prove the success of grafting polymerization. Toluidine blue O (TBO) colorimetric assay was utilized to quantify the graft amounts of pNaSS. Results showed that the amounts of grafted pNaSS on the PEEK surface could be well-controlled from 0.59 ± 0.07 mmol/cm 2 to 5.08 ± 0.20 mmol/cm 2 , through adjusting the UV irradiation time and monomer concentration. The hydrophilicity of PEEK surface was increased and the in vitro mineralization ability was promoted with the introduction of pNaSS. Besides, this surface modification method did not influence the intrinsic mechanical properties of PEEK. in vitro biological studies revealed that cell adhesion, proliferation, and osteogenic differentiation of MC3T3-E1 cells were enhanced with the increase of graft amounts.
研究领域:
材料科学
·
生物材料
·
组织工程
·
生物医学工程
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Chunyan Yan,Dong Huang,Xia Shen,Ningbo Qin,Keming Jiang,Dawei Zhang,Qian Zhang
Morinda officinalis is an important traditional tonic herbal medicine. In the present study, we found that crude polysaccharides extracted from M. officinalis , named MO90, could significantly increase the bone mineral density (BMD) of the whole femur, distal femur, and proximal femur in ovariectomized (OVX) rats. In addition, MO90 decreased the level of bone turnover markers and prevented the deterioration of trabecular microarchitecture. To investigate the fractions responsible for anti-osteoporosis activity, one novel inulin-type fructan, MOW90-1, was isolated from MOP90. Structural analysis indicated that MOW90-1 consists of a backbone of (2→1)-linked- β -D-Fru f , and is terminated with (1→)-linked- α -D-Glc p and (2→)-linked- β -D-Fru f . Furthermore, an in vitro anti-osteoporosis assay indicated that MOW90-1 promoted proliferation, differentiation, and mineralization of MC3T3-E1 cells by up-regulating the expression of runt-related transcription factor 2, osterix, osteopontin, and osteocalcin. In conclusion, our studies provide supporting evidence for future use of this novel M. officinalis fructan as a key nutrient of health products.
研究领域:
药理学
·
骨骼生物学
·
中药学
·
分子生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
·
2023
·
IF 4.6
Hongyan Wu,Xunming Zhang,Zhaoguo Wang,Xi Chen,Yi Li,Jiayuan Fang,Shuo zheng,Libo Zhang,Changhong Li,Linlin Hao
As an attractive biomaterial for bone reconstruction, injectable biomaterials have many prominent characteristics such as good biocompatibility and bone-filling ability. However, there are weak as load-bearing scaffolds. In this study, polyvinyl alcohol (PVA) and bioactive glass (BAG) were interpenetrated into sodium alginate (SA) network to obtain self-enhanced injectable hydrogel. The optimum ratio of PVA/SA/BAG hydrogel was determined based on injectability, gelation time and chemical characterization. Results showed that the selected ratio had the shortest gelation time of 3.5min, and the hydrogel had a rough surface and good coagulation property. The hydrogel was capable of carrying 1kg of weight by mineralization for 14 d The compressive strength, compressive modulus, and fracture energy of the hydrogel reached 0.12MPa, 0.376MPa and 17.750kJ m −2 , respectively. Meanwhile, the hydrogel had high moisture content and dissolution rate, and it was sensitive to temperature and ionic strength. Hydroxyapatite was generated on the hydrogel surface, and the hydrogel pores increased, and the pore size enlarged. The biocompatibility of PVA/SA/BAG hydrogel was analyzed using hemolysis and cytotoxicity assays. Results revealed its good biocompatibility with low hemolysis rate and no cytotoxicity to MC3T3-E1 cells. The hydrogel was also found to promote the differentiation of MC3T3-E1 cells with significantly increased in ALP activity and expression of relevant differentiation factors. In vitro mineralization assay showed an increase in calcium nodules and calcification area, indicating the ability of hydrogel to promote mineralization MC3T3-E1 cells. These findings indicated that PVA/SA/BAG hydrogel had potential uses in the field of irregular bone-defect repair due to its injectability, cytocompatibility, and tailorable functionality.
研究领域:
材料科学
·
生物材料
·
生物医学工程
·
组织工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2024
·Vol. 14
·期 31
·22420-22433
·
IF 3.9
Chunyan Tian,Kun Li,Fuhuan Chu,Qiujiang Wei,Shiqi Xu,Linhui Qiang,Xinrui Gou
Traditional bone tissue engineering techniques require the extraction and proliferation of seed cells, followed by prolonged in vitro culture to form bone tissue constructs. In contrast, in situ mineralization bone tissue engineering utilizes alkaline phosphatase within the body's microenvironment to induce scaffold mineralization. This approach promotes further proliferation and differentiation of osteoblasts and the formation of bone tissue constructs, thereby simplifying the traditional bone tissue engineering process. This study uses electrospinning technology to prepare a novel biologically active scaffold for bone tissue engineering using poly(lactic-co-glycolic acid) (PLGA) and calcium glycerophosphate. The morphology and composition of the scaffolds were characterized using SEM, EDS, and XRD, revealing well-defined fibrous structures and the successful incorporation of calcium glycerophosphate into the PLGA fibers. In vitro simulation of the bone microenvironment using alkaline phosphatase effectively catalyzed the in situ mineralization of calcium glycerophosphate within the scaffold. SEM observations showed substantial mineral aggregation on the surface of the fibrous membranes, and XRD characterization confirmed that the diffraction peaks of the minerals correspond to hydroxyapatite. The cytotoxicity, cell proliferation, and osteogenic differentiation assessments on MC3T3-E1 pre-osteoblasts cultured on the prepared scaffolds indicate that the scaffolds are non-toxic to cells and possess good osteogenic differentiation ability, enabling in situ mineralization. This suggests that the scaffolds have broad prospects for application in bone defect repair.
研究领域:
生物医学工程
·
材料科学
·
组织工程
·
细胞生物学
✓ 已验证
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）