Journal of Inorganic and Organometallic Polymers and Materials
·
2025
·
IF 4.9
Liu Deyan,Zhu Manying,Zhang Nanhai,Song Qinghe,He Guangjun,Wang Shixing,Zhang Libo
It is of urgent significance to develop highly stable and efficient CrO 4 2− detection technology in the fields of drinking water distribution and sewage treatment. A highly stable europium metal-organic framework (Eu-MOF) was designed as fluorescent probe for the efficient detection of trace CrO 4 2− in water solutions. This was achieved through the self-assembly of the lanthanide Eu 3+ and a rigid conjugated organic ligand [2,2’- biquinoline]-4,4’-dicarboxylic acid (H 2 L) under hydrothermal conditions. The obtained Eu-MOF exhibits excellent water stability, thermal stability and photostability. The Eu-MOF can quantitatively detect trace amounts of CrO 4 2− through fluorescence quenching effect. Its detection sensitivity is 4.48 × 10 4 M − 1 , with a detection limit as low as 0.06 µM (9.7 µg/L). This is one of the lowest values for the detection limit of CrO 4 2− in aqueous solution and is far below the allowable level for drinking water specified by World Health Organization. The Eu-MOF sensor also demonstrates excellent selectivity, anti-interference ability, repeatability (after 4 cycles), reproducibility and practical feasibility. Furthermore, the fluorescent luminescence and senseing mechanism were studied in detail. The fluorescence senseing mechanism of the Eu-MOF for CrO 4 2− detection involves the competitive absorption of excitation energy. The fluorescence-based sensing technology using the Eu-MOF provides a reference for environmental pollution detection and holds potential practical value.
研究领域:
环境科学
·
材料科学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2022
·
IF 9.231
Xiaoyu Zhang,Qinqin Ma,Xinfang Liu,Huawei Niu,Lei Luo,Rongfang Li,Xun Feng
A new europium metal–organic framework ( Eu-MOF ) was prepared by simple hydrothermal method . The product exhibited intense red fluorescence, long fluorescence lifetime (0.454 ms) and excellent fluorescence stability. The fluorescence titration result showed that Fe 3+ could completely quench the fluorescence of Eu-MOF , while the fluorescence quenching effect of Fe 2+ or bromate was negligible. Considering the strong oxidizing property of bromate, a “turn off” Eu-MOF@Fe 2+ sensor toward bromate was designed by generating Fe 3+ due to the redox reaction . The results showed that the sensor displayed a wide linear range (0–0.2 mM), high sensitivity (LOD = 3.7 × 10 −6 mol/L), good selectivity and resistant to possible interferences in real four sample. Furthermore, the detection mechanism was investigated by PXRD, XPS and UV–Vis methods. More importantly, the Eu-MOF@Fe 2+ sensor was further applied to detect bromate in wheat flour with satisfactory recovery (95.30%−104.38%) and accuracy (RSD < 2.85%). These results suggest that Eu-MOF@Fe 2+ can be used as a potential sensor to detect bromate in food industry.
研究领域:
分析化学
·
食品安全
✓ 已验证
DOI
高影响因子
TALANTA
·
2019
·
IF 4.916
Licheng Cao,Yameng Zhao,Zhanying Chu,Xiangmin Zhang,Weibing Zhang
In proteomics, phosphorylation is an important process for protein post-translational modification (PTM), which greatly improves the diversity of proteomes. The PTM regulates almost all physiological and pathological processes such as signal transduction , cell division, proliferation, differentiation and metabolism. The abnormal expression of protein phosphorylation is also associated with cellular metabolic disorders and a range of diseases. However, in mass spectrometry-based phosphorylated peptideomics studies, phosphorylated peptide signals were inhibited by a high abundance of non-phosphorylated peptides; thus, highly selective enrichment was required. In this study, a newly designed material named Fe 3 O 4 @MIL(Fe/Ti) was synthesized using a layer-by-layer self-assembly technique that coats the surface of magnetic oxide nanospheres with bimetallic MOF of iron and titanium. The synergistic synthetic coating of the bimetallic MOF gives the material a large surface area and excellent hydrophilicity , which endow the nanoparticles with excellent phosphopeptide enrichment ability, high selectivity (β-casein/BSA molar ratio 1:500), a low detection limit (3 fmol), high recovery rate (85%), strong binding capacity, size exclusion ability, and ideal batch-to-batch repeatability. For comparison, we used Fe 3 O 4 @MIL(Fe/Ti) and two single-metal MOF materials Fe 3 O 4 @MIL-100(Fe) and Fe 3 O 4 @MIL-125(Ti), to enrich α-casein in the middle. Thus, the iron-titanium bimetallic MOF can not only enrich all the phosphorylated peptides enriched by Fe 3 O 4 @MIL-100(Fe) and Fe 3 O 4 @MIL-125(Ti), but can also specifically enrich four phosphorylated peptides. Encouraged by the excellent results of characterization and standard protein enrichment, we used this material to analyze human serum and found that bimetallic materials can effectively enrich all four phosphorylated peptides and exclude high molecular proteins. These experimental results indicate that the novel bimetallic MOF is a good candidate to analyze protein phosphorylation in complex samples.
研究领域:
蛋白质组学
·
生物化学
·
材料科学
·
医学
✓ 已验证
DOI
高影响因子
Electrocatalysis
·
2021
·Vol. 12
·期 4
·456-468
·
IF 2.713
Huang Dihui,Huang Xiaozhou,Chen Jinyang,Ye Ruihong,Lin Qian,Chen Sheng
This work constructed a new-type bisphenol A (BPA) electrochemical sensor on the basis of self-assembled multi-layer strategy of Ce-Zn-metal organic framework/multiwall carbon nanotube (Ce-Zn-MOF/MWCNT)–modified glassy carbon electrodes (GCE). The novel bimetallic Ce-Zn-MOF are synthesized by 1,3,5-benzenetricarboxylic acid (H 3 BTC) as the ligand via a hydrothermal approach. Bimetallic Ce-Zn-MOF with multiple catalytic sites and ultra-high specific surface area introduces traditional electrode modification materials, which improves the conductivity and catalytic ability of MWCNTs. Field emission scanning electron microscopy, transmission electron microscope and Powder X-ray diffraction were performed to analyze the Ce-Zn-MOF/MWCNTs. The electrochemical property was researched utilize differential pulse voltammetry (DPV), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). In the optimum conditions, the proposed sensor exhibited a wider dynamic linear range of BPA determination in 0.1 to 100 μmol·L −1 with a detection limit of 7.2 nmol·L −1 ( S / N = 3). This measurement of BPA was successfully used for drinking water with desirable recovery from 96.5 to 103.4%. Graphical Abstract
研究领域:
分析化学
·
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
ACS Applied Engineering Materials
·
2023
·
IF 0
Cheng Ke,Jianxi Liu,Yubo Liu,Zhihuan Li,Tao Du,Yang Wu,Haibao Hu,Feng Zhou,Weimin Liu
Superhydrophobic surfaces with outstanding liquid-repellent properties have potential applications in anti-icing, self-cleaning, and corrosion protection, which rely on a stable gas–liquid interface and low surface energy for passive protection. However, there are still challenges in overcoming physical damage of the superhydrophobic surface and integrating self-healing and active deicing properties to boost their practical application. Here, we report a photothermal MOF-based superhydrophobic coating with synergistic protective functions of passive liquid-repellent properties (for self-cleaning, anti-icing, and anticorrosion) and active photothermal responsiveness (for deicing and photothermal self-healing). The multifunctional coating was prepared by the spray-coating method, in which fluoridated photothermal ferrocene-MOF nanosheets and SiO2 nanoparticles were applied in epoxy resin to develop their versatility. Passive liquid-repellent properties of the superhydrophobic surface caused high-efficiency removal of solid and liquid contaminants, freezing delay of droplets, and corrosion resistance. Moreover, rapid active deicing performance was achieved without damaging the textural structure of the coating. Importantly, the superhydrophobicity of the surface was maintained after mechanical abrasion. Also, the liquid-repellent properties of the plasma-etched coating recovered rapidly with light illumination due to the photothermal-induced migration of fluorosilane chains. Therefore, the synergy of passive liquid-repellent properties and active photothermal responsiveness provides a strategy for the design of multifunctional coating.
研究领域:
材料科学
·
表面工程
·
纳米技术
·
腐蚀防护
✓ 已验证
DOI
Environmental Science-Nano
·
2025
·
IF 5.1
Yinyin Peng,Yang Luo,Shuyuan Liu,Yin Cong,Derong Liu,Bowen Hu,Xiaoqin Pu,Guoyuan Yuan,Wei Xiong
This study addresses the challenge of cobalt ion separation by developing novel MOF nanofibers, Co(II)-PIIMs. Co(II)-SIM-IIP was synthesized using zinc-based MOFs (SIM-1) as a matrix and tetraethylpentadiamine (TEPA) as a functional monomer through the ion-imprinting technique (IIT). These Co(II)-SIM-IIP particles were then incorporated as fillers into a polyacrylonitrile (PAN) substrate to fabricate Co(II)-PIIMs-x nanofibers via electrospinning, aimed at selective cobalt ion separation. The optimal performance was achieved at a 10% doping level of Co(II)-SIM-IIP, resulting in a maximum adsorptive capacity of 112.74 mg g−1, a membrane flux of 1095 L m−2 h−1, and a retention rate of 43.49%. The material demonstrated excellent selectivity, exhibiting high selectivity factors for various ions, such as Ca2+ (7.42), K+ (55.98), Mg2+ (72.30), and Ni2+ (1.28). The adsorption mechanism revealed that cobalt adsorption onto Co(II)-PIIMs is primarily governed by chemisorption, facilitated by the uniform distribution of cobalt on the surface of the nanofibers. Importantly, after five cycles, Co(II)-PIIMs exhibited outstanding regeneration capability, retaining over 95% of their initial adsorption capacity. These remarkable selectivity factors underscore the material's potential for efficient cobalt ion separation and purification in environmental remediation applications.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2025
·
IF 7.5
Zihao Hu,Xiaoying Zhou,Tiantian Zhang,Zuliang Wu,Jing Li,Wei Wang,Erhao Gao,Jiali Zhu,Shuiliang Yao
Catalytic combustion has been considered the effective way to oxidize carbon monoxide (CO). It is both crucial and challenging to develop highly-active monolithic catalysts at lower temperatures for industrial applications. This study synthesized a monolithic Co 3 O 4 /Mn 3 O 4 -NF catalyst by the generation of in-situ metal–organic framework (MOF-74)-derived Co 3 O 4 /Mn 3 O 4 on nickel foam (NF). The resulting Co 3 O 4 /Mn 3 O 4 -NF catalyst demonstrated superior low-temperature CO oxidation performance, and the T 90 temperature was 20 °C. The enhanced activity is associated with the increased oxygen vacancy concentration, abundant Co 3+ , Mn 2+ + Mn 3+ , and surface-adsorbed oxygen species (O ads ), as well as low-temperature reducibility. In addition, operando DRIFTS analysis revealed that the surface of this as-prepared catalyst possessed abundant terminal-type oxygen (M O), facilitating CO adsorption and catalytic oxidation. This pioneering study introduces a paradigm-shifting insight: the effectiveness of non-noble metal oxide catalysts can now compete with, and in some cases, outperform their noble metal counterparts. This breakthrough is set to transform the industry, presenting a compelling alternative to conventional noble metal catalysts and propelling the evolution of state-of-the-art environmental conservation technologies.
研究领域:
催化材料
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2024
·
IF 8.3
Siyu Guo,Yanzhi Cai,Laifei Cheng,Yibing Yuan,Yuhan Wang,Haiming Yu,Zhongyi Hu,Dengpeng Chen,Hudie Yuan
Metal–organic frameworks (MOFs) have attracted attention due to their designable structures. However, recently reported MOF microwave-absorbing materials (MAMs) are dominated by powders. It remains a challenge to design MOF/carbon nanotube (CNT) composite structures that combine the mechanical properties of self-supporting flexibility with excellent microwave absorption. This work involves the hydrothermal approach to grow Ni-MOF of different microstructures in situ on the CNT monofilament by adjusting the molar ratio of nickel ions to organic ligands. Subsequently, an ultraflexible self-supporting Ni-MOF/CNT buckypaper (BP) is obtained by directional gas pressure filtration technology. The BP porous skeleton and the Ni-MOF with a unique porous structure provide effective impedance matching. The CNTs contribute to the conduction loss, the cross-scale heterogeneous interface generated by Ni-MOF/CNT BP provides rich interfacial polarization loss, and the porous structure complicates the microwave propagation path. All factors work together to give Ni-MOF/CNT BP an excellent microwave absorption capacity. The minimum reflection losses of Ni-MOF/CNT BPs decorated with granular-, hollow porous prism-, and porous prism-shaped Ni-MOFs reach −50.8, −57.8, and −43.3 dB, respectively. The corresponding effective absorption bandwidths are 4.5, 6.3, and 4.8 GHz, respectively. Furthermore, BPs show remarkable flexibility as they can be wound hundreds of times around a glass rod with a diameter of 4 mm without structural damage. This work presents a new concept for creating ultraflexible self-supported MOF-based MAMs with hierarchical interpenetrating porous structures, with potential application advantages in the field of flexible electronics.
研究领域:
材料科学
·
电磁学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2024
·
IF 4.4
Linlin Yu,Jiawei Ji,Ruoyu Chen,Qian Jia
Frequent oil spill incidents and increasing amounts of industrial wastewater pose a serious threat to the environment. The use of superhydrophobic materials to separate oil/water mixtures has attracted widespread attention. In this work, a superhydrophobic sponge based on MOF-5 was prepared to achieve efficient continuous oil–water separation and emulsion purification. HDTMS-MOF-5@PDA@MS (H-MOF-5@PDA@MS) not only exhibited superhydrophobic property (WCA = 153.8°, SA = 6.5°) but also exhibited excellent saturated adsorption capacity, with an oil adsorption capacity of 66 (petroleum ether)-168 (chloroform) g/g and oil–water separation efficiency of 99.2%. It also demonstrated efficient performance in various emulsion purification processes. Furthermore, it maintained a stable superhydrophobicity in some extreme environments. H-MOF-5@PDA@MS is expected to have wide application perspective in the fields of environmental pollution control and wastewater treatment due to its low cost, simple process, excellent oil–water separation efficiency, reusability, and environmental friendliness.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Yaqi Yu,Dilong Hong,Zeyu Zhu,Chuanfeng Zhao,Yuliang Jiang
Tryptophan(Trp), an essential amino acid for the body, plays a crucial role in many physiological processes. Abnormal levels of tryptophan can be harmful to living organisms. Accurate real-time monitoring of its concentration is vital for maintaining health. Since the organism can only obtain tryptophan through external intake, the development of fluorescent probes for detecting tryptophan in various environments holds significant value. In this study, a Zr-MOF was synthesized using Zr 4+ as the metal node, 1,2,4,5-benzenetetracarboxylic acid (H₄BTEC) and 4-carboxyphenylboronic acid (CPB) as organic ligands via a simple one-pot synthesis method, named UiO-66-COOH-B(OH)₂ (UBB). Subsequently, by virtue of the abundant carboxyl groups, UBB was post-synthetically modified with Eu 3+ to form UiO-66-COOH-B(OH)₂ @Eu 3+ (UBBE). UBB and UBBE were investigated as fluorescent probes for the detection of the Trp. UBBE probe demonstrated a significantly lower detection limit than UBB probe as 0.026 μM and 0.79 μM, respectively. Additionally, the UBBE probe exhibits good selectivity, stability, and other advantages, allowing successful detection in fetal bovine serum and various food samples.
研究领域:
生物化学
·
食品科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Analytical Methods
·
2024
·
IF 2.7
Wenxia Xue,Jihong Fu,Yaxue Zhang,Shuxian Ren,Guoqi Liu
Surface-enhanced Raman scattering (SERS) enables pesticide residue monitoring to become facile and efficient. In this study, a core–shell structured gold nanoparticles@ZnCo metal–organic framework (AuNPs@ZnCo-MOF) SERS substrate was designed and successfully synthesized for efficient and selective detection of thiram. The bimetallic ZnCo-MOF shell can not only enrich the targeted molecules in the electromagnetic field because of its excellent absorptive capacity, but also act as a stabilized matrix for protecting the AuNPs from aggregation. The AuNPs@ZnCo-MOFs exhibited a high enhancement factor (EF) of 3.51 × 106 and a low detection limit of 1 × 10−7 mol L−1. Besides, the substrate material showed exceptional stability for up to 28 days at room temperature. The AuNPs@ZnCo-MOFs were used to detect thiram which displayed wide linearity (1 × 10−7 to 1 × 10−4 mol L−1) and high recoveries (83.45–99.61%). Moreover, the AuNPs@ZnCo-MOF SERS substrate exhibited excellent anti-interference ability and size selectivity for the target molecules. These indicate that the AuNPs@ZnCo-MOF substrate has great potential for the detection of thiram residues in practical applications.
研究领域:
分析化学
·
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2024
·
IF 8.3
Fan Liu,Wenbo Li,Yuan Liang,Xianhua Zhang,Dongxiao Ji,Hengtao Liang,Mengyu Yuan,Yanchao Zhao,Haozhe Tang,Xiang Li,Jianxin He,Weili Shao
Functional materials that can quickly absorb and degrade mustard gas are essential for chemical warfare emergency response kits. In this study, a fiber membrane with excellent adsorption and catalytic degradation activity was developed by solution blow spinning polystyrene (PS)/polyurethane (PU) and hydrothermal in situ growth of a zirconium-based MOF (MOF-808). The mechanical properties of the PS/PU fibers were improved by adding a trimethylolpropane tris (2-methyl-1-aziridine propionate) (TTMA) cross-linking agent. Moreover, the C═O bonds in TTMA provided abundant growth sites for MOF-808 in the hydrothermal process, thereby greatly increasing the loading capacity. The fiber surface was completely covered with the MOF-808 particles within 24 h. The PS/PU/TTMA/MOF-808 fiber membrane was used for the catalytic degradation of 2-chloroethyl ethyl sulfide (CEES). The degradation efficiency reached 97.7% after 72 h, indicating its great application potential in emergency wiping cloths for mustard gas adsorption and degradation.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）