文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第1189至1200个,产品总数1,342个

切换升序
吡咯
ACS Applied Polymer Materials · 2025 · IF 4.7

Janus PVDF-Modified Melamine Sponge Composite for High-Efficiency Solar Seawater Desalination

Huixin Wang,Xuelong Chen,Chenlong Kang,Youmao Tang,Junhuan Sun,Zifa Wang,Yushi Guo,Xiao Han,Zewen Li,Haijun Niu,Zhe Wang

Solar-driven interfacial evaporation has been regarded as a promising eco-friendly strategy for desalination, but salt deposition on evaporators limits long-term stability in practical applications. Here, we present a superhydrophobic Janus solar evaporator, namely, polypyrrole-coated polyvinylidene fluoride-modified MS (PPy-PMSP), which is fabricated through a simple dipping-drying process. The PPy-PMSP achieves high light absorption and photothermal conversion, enabling an evaporation rate of 4.22 kg m–2 h–1 in simulated seawater (3.5 wt % NaCl) under 1 sun irradiation. It also exhibits excellent salt ion rejection performance in high-salinity brine conditions and a strong purification performance for organic dyes. With simple preparation, low cost, and durability, PPy-PMSP demonstrates great potential for seawater desalination and wastewater purification.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Advanced Membranes · 2025 · IF 9.5

Poly (ether block amide) membranes with hyper-crosslinked polymer fillers for enhanced pervaporation of phenol aqueous solutions

Zhihao Huang,Chuanlong Li,Yuanyuan Sheng,Liqiu Yang,Haoli Zhou,Wanqin Jin

Pervaporation (PV) is considered one of the most industrially potential phenol wastewater treatment technologies because of its advantages such as high efficiency and without regeneration. PV membrane performance is a key factor that determines its industrial applicability. Here, polymer-filler-based mixed matrix membranes (MMMs) are proposed to enhance the membrane performance for pervaporation of phenol aqueous solutions. First, three hyper-crosslinked polymer (HCP) fillers were synthesized via the Friedel–Crafts reaction between benzyl alcohol (BA) and a penta-heterocyclic compound, such as furan (Fu), and analyzed by different characterizations. All the fillers exhibited desirable properties such as high phenol adsorption capacity and excellent hydrophobicity. Subsequently, different MMMs were fabricated by incorporating the HCP fillers into poly (ether block amide) (PEBA-2533) for the separation of phenol aqueous solutions. The Fu/BA-HCP@PEBA-2533 MMM was selected for further investigation as it afforded the highest separation factor of 72.2 and a flux of 2.07 kg/(m 2 ·h) at 70 °C for the separation of a 1.5 wt.% phenol aqueous solution. The diffusion and solubility coefficients were measured. The effects of different operating conditions on the membrane performance and long-term stability were studied, and the results for the pervaporation of phenol aqueous solutions were compared with previously reported data. Investigating the effects of diverse polymer fillers and their compatibility with polymers on the fabrication and performance of MMMs will be a prospective future research direction.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2025 · IF 5.4

Interfacially engineered polypyrrole/ZIF-8 based bilayer nanocomposite coating for sustained active-passive protection of stainless steel

Meng Xu,Mianyu Bao,Han Zhang,Chun Xu,Yanmao Dong,Yan Yuan,Jie Liu,Li Jiang

The development of intelligent coatings shows great potential for sustained corrosion protection. In this study, ZIF-8 was combined with graphene oxide (GO) and the corrosion inhibitor 1,10-Phenanthroline (Phen) to prepare PZ 8 G nanomaterials. These nanoparticles were introduced into a dispersed carbon nanotube enhanced water-borne acrylic epoxy resin to fabricate a corrosion inhibition coating (PZ 8 G/DCE), followed by electrodeposition of a polypyrrole (PPY) outer film to construct a PZ 8 G/DCE/P bilayer architecture with enhanced anti-corrosion performance. The PZ 8 G composites exhibited improved compatibility with acrylic epoxy resin compared to pristine ZIF-8, and the PZ 8 G/DCE/P bilayer coating presented satisfactory adhesion. This coating effectively enhanced the corrosion resistance of 304SS in both acidic and saline environments, increasing the corrosion potential by 0.36 V and 0.3 V, respectively. The coating demonstrated significant efficacy in acidic conditions, in which the EIS tests confirmed stable protection over 30d of immersion, while SEM characterization after 60d of immersion revealed it maintained structural integrity with minimal morphological changes. Furthermore, the self-healing capability of PZ 8 G/DCE/P coating system was verified through EIS measurements on artificial scratches combined with elemental analysis, which demonstrated the active release of inhibitors and the formation of protective composites at damaged region. The synergistic combination of PPY, which exhibits dual functionality as both anodic protection and physical barrier, with actively corrosion inhibiting PZ 8 G nanofillers, effectively provided a sustained active-passive corrosion protection for stainless steel under aggressive conditions. This work suggests a promising strategy for designing smart anti-corrosion materials.

CAS / MDL: 109-97-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2025 · IF 9.7

Hierarchical heterostructure engineering of amorphous nickel boride nanoparticles decorated N-doped NiMoO4 hollow nanostructures with enhanced interfacial conductivity for high-performance hybrid supercapacitors

Hongwei Che,Aifeng Liu

Constructing heterostructured electrode materials with unique nanoarchitectures and tailored electronic properties is regarded as a practicable approach to boost the energy density of hybrid supercapacitors (HSCs). Herein, a novel heterostructure comprising semiconductive nitrogen-doped nickel molybdate (N–NiMoO 4 ) hollow nanostructures and metalloid nickel boride (Ni x B) nanoparticles is designed and synthesized. Theoretical simulations and experimental analyses reveal that the nitrogen doping enhances the electrical conductivity of N–NiMoO 4 . In particular, the formation of an ohmic contact interface between N–NiMoO 4 and Ni x B reduces the barrier to electron/ion transport across the interface, thereby considerably improving the electrochemical reaction kinetics. Furthermore, the surface decoration of the N–NiMoO 4 hollow nanostructures with the Ni x B nanoparticles provides additional electroactive sites and enhances the overall electrochemical performance of the N–NiMoO 4 @Ni x B heterostructures. Consequently, the constructed N–NiMoO 4 @Ni x B heterostructures exhibit enhanced specific capacities (932 C g −1 at 1 A g −1 and 709 C g −1 at 10 A g −1 , respectively) and cyclic stability (93.6 % capacity retention after 5000 cycles). Moreover, the assembled HSC device using N–NiMoO 4 @Ni x B as the positive electrode can deliver an energy density of up to 53.1 Wh kg −1 at 802 W kg −1 and maintain 95.0 % capacity after 5000 cycles. These findings provide valuable insights for optimizing interface design and heterojunction engineering in metal-boride/molybdate-based composite electrodes for advanced HSCs.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Nature Communications · 2025 ·Vol. 16 ·期 1 ·1-13 · IF 15.7

Spatially regulated water-heat transport by fluidic diode membrane for efficient solar-powered desalination and electricity generation

Cao Yuanhang,Wang Jiemin,Guan Weixin,An Meng,Yan Peng,Li Zhengtong,Zhao Changsheng,Yu Guihua

Interfacial solar-driven evaporation has attracted great research interests, given its high conversion efficiency of solar energy and transformative industrial potential for desalination. However, current evaporators with porous volume remain critical challenges by inherently balancing efficient fluid transport and effective heat localization. Herein, we propose the strategy and design of lightweight, flexible and monolayered fluidic diode membrane-based evaporators, featuring regularly arrayed macropores and dense nanopores on each side. Such a delicate microstructure offers universality in establishing asymmetric channels along macroporous-to-nanoporous to enable the diode-like directional water transport as well as facilitate the heat localization on the nanopores side. Consequently, a high evaporation rate of a maximum 3.82 kg m −2  h −1 can be achieved under 1 sun illumination, exceeding most 2D and 3D evaporators. Besides, the durability and practicability of our evaporators are validated through salt resistance tests, purification experiments among various contaminants, and outdoor evaluations. Moreover, the structure engineering and water-transport optimization of fluidic diode membranes also offer potentials for hydrovoltaic applications, with over 1.6 V generated by tandem devices at the ambient environment. This work provides a concept for designing high-performance monolayered membranes applicable in environmental and energy-related realms.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2025 · IF 6.3

A SERS sensor of g-C3N4/Au@Ag thin film for detecting nitrofurantoin residues in honey

Caizhen Zu,Xishun Peng,Yi Long,Man Peng,Cunwei Wang,Haili Zhang,Zhangwei Tan,Yuxue He,Zhongchen Bai

Detecting antibiotic residues in food is a critical challenge for food safety assurance. This study developed a surface-enhanced Raman scattering (SERS) sensor based on two-dimensional graphitic carbon nitride (g-C 3 N 4 ) loaded with Au@Ag core-shell nanostructures (g-C 3 N 4 /Au@Ag) for detecting nitrofurantoin (NFT) residues in honey. The g-C 3 N 4 /Au@Ag thin film was fabricated by sequentially depositing g-C 3 N 4 nanosheets, Au nanoparticles, and Ag nanoparticles onto a stainless steel substrate via an electrochemical deposition method. This SERS sensor could synergistically amplify SERS signals by combining the localized surface plasmon resonance (LSPR) from the Au@Ag nanostructures with the charge transfer between the g-C 3 N 4 semiconductor and Au@Ag nanostructures. The optimized SERS sensor achieved an exceptional SERS enhancement factor of 3.8 × 10 6 for NFT in aqueous solutions, with a limit of detection (LOD) of 0.72 nM. Moreover, this SERS sensor could also recognize NFT residues in honey matrices at an LOD of 5 nM. These results provide a novel strategy for the highly sensitive detection of antibiotic residues in food safety monitoring, highlighting its potential for rapid screening of NFT residues in food.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
WASTE MANAGEMENT · 2025 · IF 7.1

A tailored nitrogen-rich polymer for highly efficient and selective capture of gold from waste printed circuit boards

Li Zhao,Wenwen Qu,Xianzhi Hu,Futing Zi

Achieving efficient and selective gold recovery from electronic waste is a desirable approach for the sustainable utilization of existing rare metal resources. In this study, an ingenious positively charged trap based on azole-functionalized polymer (CMCPS-IMZ) was strategically designed and synthesized via solvothermal method for the precise capture of gold complex ions. By incorporating nitrogen-containing heterocyclic groups onto the CMCPS surface, the porous structure and large surface area promoted the formation of gold-binding sites, thereby enhancing adsorption efficiency. Specifically, CMCPS-IMZ exhibited exceptional Au(III) adsorption performance, with a maximum loading capacity of 323.08 mg/g, following pseudo-first-order kinetics and Freundlich isotherm models. Theoretical calculations and experimental analysis suggested that the electrostatic interactions between the RNH + group on CMCPS-IMZ and AuCl 4 - served as the primary driving force to realize the highly efficient gold recovery, as well as involved in weak intermolecular interactions. Furthermore, CMCPS-IMZ demonstrated remarkable stability over multiple adsorption–desorption cycles using 0.5 M SC(NH 2 ) 2 as the ideal eluent, underscoring its potential as a robust and sustainable platform for precious metals recovery. Notably, CMCPS-IMZ microspheres achieved a gold extraction efficiency exceeding 93.33 % even in the presence of high concentrations of interfering ions in actual e-waste leachate. This work provides valuable insights into the nature of ion affinity and selectivity, offering guidance for the rational design of advanced adsorbents with tailored binding sites for targeted ion capture.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Bioresources and Bioproducts · 2025 · IF 13

Skin Repairing Procedure Inspired Polypyrrole/Bacterial Cellulose/Platelet Rich Plasma Composite Hydrogel as Diabetes Wound Dressing

Hao Wang,Pengyu He,Guoliang Tang,Fuyu Qi,Xu Lu,Maoxu Zhang,Ruizhu Zheng,Xiaohong Li,Zhijun Shi,Yaopeng Zhang,Guang Yang

Diabetic ulcers represent a kind of severe chronic wound that presents significant challenges to global healthcare systems. The impaired healing process in diabetic wounds is attributed to persistent inflammation, compromised angiogenesis, and bacterial infections. When dermic injury occurs, the skin will initiate a complex cascade of natural repair procedures to facilitate coordinated progression through inflammatory, proliferative, and remodelling phases. Inspired by these physiological repair processes, a multifunctional hydrogel dressing was designed by combining capacitive polypyrrole (PPy) with bacterial cellulose (BC) hydrogel and platelet-rich plasma (PRP) to achieve synergistic antibacterial efficacy, immunomodulation of the wound microenvironment, and enhanced tissue regeneration. The BC hydrogel serves as a scaffold for PRP encapsulation, protecting growth factors from protease degradation while enabling sustained release. Capacitive PPy not only provides potent antibacterial activity through electric field (EF) mediated charge storage, but also promotes electrical signal transduction to regulate growth factor release kinetics. In vitro results revealed that pre-charged polypyrrole/bacterial cellulose/platelet-rich plasma (PBP) composite hydrogels exhibited superior bactericidal efficacy, enhanced fibroblast and endothelial cell proliferation, and modulation of macrophage polarization. In diabetic wound models, treatment with the electroactivated PBP composite hydrogel demonstrated a marked reduction in inflammatory responses, accelerated vascular regeneration, enhanced collagen deposition, and overall improvement in wound healing.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials Today Nano · 2025 · IF 8.2

Self-cleaning and anti-counterfeiting structural color coating based on fluorescent SiO2@PPy@CQDs microspheres

Yinchun Fang,Xianglu Zhao,Xuchen Tao

Photonic crystals (PCs) structural color coatings have been widely studied due to their advantages of environmental friendliness, resistance to fading and high color saturation. However, they still have problems such as single function and being easily affected by the external environment. In this research, fluorescent SiO 2 @polypyrrole@carbon quantum dots (SiO 2 @PPy@CQDs) microspheres were synthesized by incorporating CQDs into SiO 2 @PPy microspheres, which were self-assembled on the white cotton fabrics to form an amorphous photonic structure (APS). These APS exhibited angle-independent structural colors under natural light and blue fluorescence under UV light. The structural colored cotton fabrics obtained superhydrophobicity with a water contact angle (WCA) greater than 150° and self-cleaning function after treatment with polydimethylsiloxane (PDMS). The anti-counterfeiting structural colored fabrics with single response to UV light and dual responses to water/UV light based on SiO 2 @PPy@CQDs, SiO 2 @PPy and SiO 2 microspheres were prepared by using multi-layer alternating atomization deposition and PDMS hydrophobic treatment processes. This study provides a novel approach for developing multifunctional structural color coatings with self-cleaning and anti-counterfeiting based on fluorescent organic/inorganic hybrid microspheres.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2025 · IF 6.9

Highly active Nitrogen-Doped MOF-Derived heterostructures with multilayer synergistic storage mechanism

Haonan Li,Xiaowen Zhang,Yongfeng Li,Xiangru Zhu,Jinhua Zhang,Yanzhen Liu

In this study, we developed a high-performance electrode material, Co@NCNT@HCNs, with a rationally designed heterojunction structure suitable for supercapacitor (SC) applications. This composite material was prepared by melamine-assisted pyrolysis of ZIF-67-coated hollow carbon nanospheres (ZIF-67@HCNs). This structure integrates metallic cobalt nanoparticles confined within bamboo-like nitrogen-doped carbon nanotubes (NCNTs), which are uniformly grown on the surface of conductive hollow carbon nanospheres (HCNs). Benefiting from the synergistic effects of hierarchical porosity, abundant redox-active Co-Nx sites, and interconnected conductive networks, the Co@NCNT@HCNs electrode delivers a high specific capacitance of 387.4F g −1 at 0.5 A g −1 and excellent cycling stability. When assembled into a symmetric SC (SSC), the device achieves a high energy density of 14.56 Wh kg −1 at a power density of 349.44 W kg −1 , and retains 83.3 % of its initial capacitance after 5000 cycles. These exceptional performances are attributed to the efficient ion/electron transport pathways and the synergistic contribution of electroactive cobalt species, nitrogen-doped carbon frameworks, and hierarchical micro/mesoporous structures. This work provides valuable insights into the rational design of hierarchical carbon-based nanostructures for advanced energy storage applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Engineering Materials · 2025 · IF 3.5

Self-Healing Polyurethane Coatings Incorporating Halloysite Nanotubes Loaded with Tannic Acid for Synergistic Corrosion Protection and Enhanced Mechanical Properties

Kunyan Lin,Weihua Shi,Bin Lu,Chenyi Wang,Shihua Dong,Haibo Wang

Long-term metal protection can be aided by the intelligent release of corrosion inhibitors, which can improve organic coatings’ anticorrosion capabilities. In this study, halloysite nanotubes (HNTs) were vacuum-loaded with tannic acid (TA) and surface-modified via in situ polymerization of polypyrrole (PPy), yielding pH-responsive nanofillers (TA-PPy@HNTs). These nanofillers enabled controlled TA release, forming protective Fe–TA complexes at corrosion sites, while the outer PPy layer imparted photothermal responsiveness, facilitating disulfide bond exchange reactions and enhancing intrinsic self-healing capabilities. Furthermore, the incorporation of polydimethylsiloxane (PDMS) segments improved hydrophobicity and delayed corrosive ion ingress. The optimized PTH-3 coating exhibited excellent corrosion resistance, maintaining an impedance modulus above 108 Ω·cm2 after 90 days in 3.5% NaCl solution. It also demonstrated superior mechanical properties (elongation at break of 447.73% and tensile strength of 30.71 MPa), outstanding cavitation resistance, and efficient sunlight-driven self-healing, restoring over 90% of its mechanical performance after damage. This work provides a promising strategy for designing multifunctional, durable protective coatings for metallic substrates.

CAS / MDL: 109-97-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Waste silk-derived photothermal aerogel for efficient interfacial solar desalination

Chao Liang,Yipeng Quan,Wenting Qian,Shuang Guo,Shengjie Zheng,Guangjie Zhang,Mingsong Fan,Jun Xiong,Ming Li

The textile industry is a major contributor to environmental pollution and generates substantial waste each year. Recycling waste fabrics has garnered significant research interest, especially in addressing the urgent global challenge of freshwater scarcity. Interfacial solar desalination (ISD) is highly valued for its energy efficiency and environmental advantages. However, its application in desalination is hampered by various challenges, including low evaporation rate (ER) and insufficient salt resistance. In this study, a sustainable photothermal aerogel (PTA) made of polypyrrole (PPy)-decorated waste silk (WS) was developed, called PPy-WS-PTA, for efficient ISD. This PTA absorbs up to 96 % of sunlight. As a three-dimensional (3D) material, PPy-WS-PTA can capture energy from its surroundings. At an exposure height of 3 cm, the PPy-WS-PTA attains an ER of 2.04 kg m –2 h −1 under 1-sun. Due to its excellent water transport and storage capabilities, the PPy-WS-PTA can withstand 20 wt% saltwater while maintaining a stable ER of 1.61 kg m –2 h −1 . Outdoor desalination experiments have demonstrated that the PPy-WS-PTA can effectively desalinate 20 wt% saltwater. This PTA not only addresses freshwater shortages but also helps reduce fabric waste pollution and enhances reutilization efficiency.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。