JOURNAL OF HAZARDOUS MATERIALS
·
2025
·
IF 11.3
Chao Xie,Pengyu Zhang,Yi Hu,Dandan Yang,Yahui Li,Yulian Li,Jiandong Lu,Zijian Wu,Junyong He,Peidong Hong,Lingtao Kong
Engineering a catalytic and hydrophilic membrane integrated system holds significant environmental implications for fouling-resistant and efficient water purification. The heterojunction Cu 2 O/Ti 3 C 2 T x was successfully synthesized by leveraging the specific interactions between the terminal active groups of MXene and Cu 2 O, effectively addressing the limitations of the catalytic membrane’s performance due to low-dose doping, and enhancing its catalytic activity and hydrophilicity. Here we report a ultra-low Cu(I) loading that achieves ultra-high fouling-resistance and decontamination performance in a self-cleaning Cu 2 O/Ti 3 C 2 T x @PVDF catalytic membrane integrated system. The representative membrane incorporating 1.0 wt% of Cu 2 O/Ti 3 C 2 T x (denoted as M-1.0) as a PMS activator demonstrated the successful performance of long-lasting antifouling and sustainable decontamination across a wide pH range in complex water matrices. The intrinsic Cu(I)/Cu(II) redox cycles was found to be crucial for driving PMS activation and oxidative conversion. Moreover, the Cu 2 O/Ti 3 C 2 T x -functionalized membrane demonstrated enhanced hydrophilicity and fouling-resistance compared to the pristine PVDF membrane. We further investigate the transformation and ecotoxicity of tetrabromobisphenol A and its intermediates within the M-1.0/PMS membrane system, providing valuable insights into the evolutionary dynamics of TBBPA. This work offers innovative perspectives for advancing environmental purification, membrane self-cleaning, and resources utilization technologies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanoscale
·
2026
·
IF 5.1
Limeili Tian,Miaomiao Yang,Jing Wang,Shuai Yang,Chunxu Han,Yangyang Huang,Qingqiang Meng,Aiping Wu
Photocatalytic degradation is an eco-friendly method for decomposing tetracycline hydrochloride (TC), yet it faces challenges such as slow photogenerated carrier transfer, poor separation efficiency, and limited active sites. Semiconductor composites offer a promising solution to enhance catalytic efficiency. In this context, a novel 0D/2D BiOCl 0.7 I 0.3 /Bi 2 MoO 6 (BOCI-BMO) direct Z-scheme photocatalyst was synthesized via a solvothermal method, featuring 0D BiOCl 0.7 I 0.3 quantum dots anchored on 2D Bi 2 MoO 6 nanosheet. The composite photocatalyst with an optimal BOCI to BMO mass ratio of 7:3 (50 mg), achieved over 94% removal of TC (10 ppm) in 40 minutes, demonstrating excellent cyclic stability and broad applicability. Both theoretical calculations and experimental results confirm that the photogenerated carrier transport between semiconductors follows a Z-scheme mechanism, significantly enhancing carrier separation efficiency while preserving strong redox capabilities. Moreover, the unique 0D and 2D structures provide a large specific surface area, offering abundant active sites and reducing carrier transport distance, thereby boosting photocatalytic performance. This study provides theoretical and experimental insights for designing and synthesizing novel visible light-responsive photocatalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DESALINATION
·
2023
·
IF 9.9
Qingyi Wang,Yongping Dong,Junmei Ma,Huimin Wang,Xuping Xue,Chaojie Bai,Mingjie Lin,Lingping Luo,Congjie Gao,Lixin Xue
Polyamide/polyethylene thin film composite (PA/PE-TFC) NF membranes were prepared from reverse-phase interface polymerization (RIP) for improved Mg(II)/Li(I) separation. RIP processes between 1,3,5-benzenetricarbonyl chloride (TMC) in bottom organic phase and piperazine (PIP) in upper aqueous phase were developed to form continuous and intact surface PA separation layers on PE porous substrates thinner than traditional polysulfone (PSF) based substrates. After activation with isopropyl alcohol (IPA), PA/PE-TFC-IPA NF membranes were formed, whose NF performance could be tuned by adjusting the preparation conditions. When TMC concentration was kept at 0.15 % w/v, RIP with low PIP concentration (0.025 wt%) yield PA/PE-TFC-IPA NF membranes with negatively charged surfaces , high Na 2 SO 4 rejection rate (95 % ± 3 %) and water permeance (13–19 L·m −2 ·h −1 ·bar −1 ). RIP with high PIP concentration (0.3 wt%) formed PA/PE-TFC-IPA NF membranes with less negative surfaces, high MgCl 2 rejection rate (94.3 ± 0.7 %), low water permeance (4.8 ± 0.3 L·m −2 ·h −1 ·bar −1 ), and high Mg(II)/Li(I) separation coefficient S Li/Mg (18 ± 1) for 1000 ppm LiCl and MgCl 2 mixed solution. PA/PE-TFC-IPA NF membranes also showed good long-term stability and improved anti-fouling performance for positively charged pollutants, bearing high potential for applications in the lithium extraction processes.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2023
·
IF 6.4
Mingzhe Zhang,Wenhui Li,Wenning Zhao,Xiuxun Han
The carbon-electrode-based CsPbI2Br perovskite solar cells (C-PSCs) are promising photovoltaic technology because of their enhanced stability and low cost. However, the CsPbI2Br film suffers from uneven surface morphology with stripes and the defect-rich surface, which are detrimental to the charge carrier transport between perovskite and carbon. Here, we demonstrate that the formation of stripes is directly related to the I/Br homogenization process during annealing. By introducing a pre-annealing treatment before high temperature annealing, the I/Br homogenization process is modulated and the stripe is successfully wiped off. Besides, enhanced charge carrier transport in the C-PSCs is achieved. Oleic acid (OA) is then introduced to modify the stripe-free perovskite film surface. It is revealed that the carboxyl group in the OA molecule can passivate the undercoordinated Pb ions, leading to further improved charge carrier transport. Eventually, a power conversion efficiency (PCE) of 15.57% is achieved, which is among the highest PCE for the CsPbX3-based C-PSCs. This work demonstrates that combining surface planarization with surface passivation is an effective strategy for developing highly efficient C-PSCs.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Dingliang Dai,Jianhao Qiu,Guanglu Xia,Yong Tang,Zhonghao Wu,Jianfeng Yao
Core-shell Bi-MOF@BiOX (X = I, Br and Cl) hybrids were fabricated by a one-pot solvothermal strategy via regulating the concentration and type of halogen ions in the Bi-based CAU-17 synthesis. By virtue of the competitive coordination effect to Bi 3+ between CAU-17 and BiOX, CAU-17 was converted into another Bi-MOF with similar structures and compositions. Moreover, Bi 3+ plays the role of “bridge” and endows an intimate interface contact between BiOX and the Bi-MOF, which immensely expedites the charge and mass transportation. The obtained Bi-MOF@BiOX hierarchical heterostructures were applied to photocatalytic elimination of solo and mixed pollutants (Cr(VI)/tetracycline and Cr(VI)/o-nitrophenol), and exhibited favorable performances. Choosing Bi-MOF@BiOI as a typical example, the corresponding performances for Cr(VI) reduction, tetracycline and o-nitrophenol degradation in their solo systems are 14, 10, 8 times higher than those of CAU-17, and 13, 7, 5 times higher than those of BiOI under visible light, respectively. Of note, the above photocatalytic performances could be further improved in the coexisting environment of Cr(VI) and tetracycline or o-nitrophenol, which is attributed to the elevated charge separation efficiency caused by the timely consumption of photo-excited electrons and holes. This work gives some insights into the delicate design of MOF photocatalysts and their applications in environmental restoration.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2023
·Vol. 15
·期 17
·7803-7811
·
IF 6.7
Tian Sun,Tong Chen,Jiahao Chen,Qiang Lou,Zihao Liang,Guijun Li,Xiaoyun Lin,Guoshen Yang,Hang Zhou
Despite the impressive developments in perovskite optoelectronic devices, their long-term stability remains a major challenge. Chemical reactions and ion exchange at the metal/perovskite contact interface are two significant factors that lead to the failure of perovskite devices. To address this issue, a titanium nitride (TiN) layer is introduced as a robust corrosion-resistant coating between perovskite films and metal electrodes. By introducing TiN layer, a perovskite photodiode with dark current down to 3.25 × 10−11 A cm−2 is realized. Consequently, the TiN-based perovskite photodiode shows a specific detectivity of 1.21 × 1014 cm W−1 Hz1/2, which is approximately two orders of magnitude higher than that of the control device without a TiN layer. Under continuous illumination of a 520 nm green light for 576 000 cycles, the responsivity of the TiN-based photodetector remains at 94.27% of its initial value. The TiN-based photodetector exhibits superior stability under thermal stress. After aging at 85 °C for 572 h, the TiN-based photodetector retains 72% of its initial responsivity. Using the TiN-based photodiode, a perovskite image sensor containing 64 × 64 pixelated perovskite photodiodes is constructed over an amorphous silicon thin-film transistor (TFT) backplane. The perovskite image sensor exhibits real-time imaging capability and long-term stability for over 6 months. This study highlights the importance of using metallic nitrides to achieve high-performance and air-stable perovskite devices for optoelectronic applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY
·
2022
·
IF 5.436
Wenli Song,Bing Zhang,Wenli Zhou,Jilin Zhang,Liping Yu,Shixun Lian
All-inorganic perovskite quantum dots (PQDs, CsPbX3, X = Cl, Br, and I) show outstanding application prospects in the field of photoelectric devices. In recent years, the development of PQDs has greatly improved their stability to water, oxygen, and light. However, thermal quenching of PQDs greatly limits their practical application. Herein, we embed PQDs into ATiO3 (A = Ca, Ba, and Sr) of three different mesoporous spherical structures to explore the effect on thermal quenching of PQDs. Because of the unique mesoporous hollow microsphere structure and low thermal conductivity of SrTiO3, it can effectively block the heat transfer and improve the thermal quenching of PQDs. The photoluminescence (PL) intensity of CsPbBr3@SrTiO3 composites is 72.6% of the initial intensity after heating to 120 °C. Moreover, the PL intensity of CsPbBr3@SrTiO3 composites remains about 80% of the initial value even when stored in air for 20 days or irradiated by 365 nm UV light for 48 h. A neutral white light-emitting diode is assembled by a blue chip, CsPbBr3@SrTiO3 composites, and red phosphor of K2SiF6:Mn4+, which has a color temperature of 5389 K and a color gamut covered 133% of National Television Standards Committee (NTSC).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2022
·
IF 6.14
Sheng Zhang,Zhenyang Liu,Linlin Mao,Jian Wu,Di Zhang,Ruiyuan Liu,Li Qi
High quality visualization of live mammalian embryo is an important requirement for studying fetal development. Photoacoustic tomography (PAT) and optical coherence tomography (OCT) are two advanced imaging modalities that have been utilized for embryonic imaging separately. However, high contrast, multiscale, and deep tissue imaging of embryos in vivo remains challenging. Here, we demonstrate multimodal contrast-enhanced imaging of live embryos by gold nanostar-meditated near-infrared I (NIR-I) PAT and near-infrared II (NIR-II) OCT. We investigate intravenous and intravaginal administration of gold nanostars, and significant enhancement of signal, image contrast, and imaging depth are achieved for both PAT and OCT. Our findings may facilitate detailed studies of the morphological and functional changes during embryonic development.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry B
·
2022
·Vol. 10
·期 32
·6107-6117
·
IF 7.571
Siying Xie,Cheng Qin,Furong Zhao,Zhaoyang Shang,Pei Wang,Muhammad Sohail,Xing Zhang,Bingzhi Li
CRISPR-driven biosensing is developing rapidly, but current studies mostly adopt dye-labeled ssDNA as the signal reporter, which is costly and unstable. Herein, we developed a label-free and low-background reporter for CRISPR/Cas12a signaling by integrating DNA-templated copper nanoclusters (DNA–CuNCs) and exonuclease I (EXO I). The template of the DNA–CuNCs was rationally designed as a ds-/ss-DNA hybrid, ensuring that after a quick and nonpersistent cut of Cas12a, a majority of the template can be digested by EXO I. Based on this novel reporter, a biosensor termed CRISPR-CNS (cost-effective, nimble, and sensitive copper nanocluster sensor integrating CRISPR) was developed. Due to the high signal-to-background ratio of our proposed reporter, CRISPR-CNS shows excellent performances for nucleic acid detection, yielding a detection limit of 20 copies for SARS-CoV-2 RNA. Considering its facile synthesis, robust fluorescence, effective cost, and good sensitivity, this combination shall serve as a highly potential output for CRISPR-based point-of-care testing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL LETTERS
·
2022
·
IF 2.267
Ruihuan Zhao,Nan Yin,Lixin Ma,Jie Zhang,Yangkai Luo,Zhimin Guo,Mengmei Fa,Dingding Yang,Dengchao Wang,Xin Yao
ATP is related to the occurrence of many diseases, its facile, sensitive and accurate determination in real samples is needed for disease screening and treatment. Although some methods realized the sensitive detection of ATP using the signal amplification of cyclic reactions or nanoparticles, complex experimental processes limit their applications. In this paper, we report a simple surface plasmon resonance (SPR) method based on a single stranded DNA probe. The probe has dual recognition sites of ATP and Ag+; namely the ATP aptamer located in the middle of the probe and five cytosine (C) at both ends of the probe. In the absence of ATP, the probe transforms into a rigid hairpin structure by forming C-Ag+-C structures and produces a large SPR signal. However, once the probe interacts with ATP, three-dimensional structures are formed, and then the Ag+-induced probe configuration change is smaller, resulting in an small SPR signal. The signal difference before and after the probe interacts with ATP is proportional to the analyte concentration. The probe configuration change is in the optimum area for SPR detection, ensuring the sensitive ATP determination. The signal difference has a linear response with the logarithm of ATP concentration from 0.05 to 500 nM with a detection limit of 15 pM. Moreover, the strategy was demonstrated to determine ATP in serum samples with satisfactory recoveries. The results show that this simple and sensitive method has potential applications for clinical ATP determination.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2022
·
IF 6.633
Yuanhui Chong,Qiong Liu,Zeqi Wang,Liukai Zhu,Fengxin Guo,Yu Li,Tao Li,Baozeng Ren
Perphenazine has rather effective in the treatment of mental illness. In this work, the solid-liquid equilibrium data of perphenazine in eleven organic neat solvents were determined by laser dynamic method under the atmospheric pressure and temperature range of 278.15 K ∼ 318.15 K. The selected solvents were n-propanol, n-butyl alcohol, methyl acetate, ethyl acetate, n-propyl acetate, n-amyl acetate, N, N-dimethylformamide (DMF), N, N-dimethylacetamide (DMAC), acetone, 2-methoxyethanol, glycol ether, respectively. From the results, the solubility of perphenazine is all positively correlated with temperature. Separately, we have adopted the KAT-LSER model and molecular dynamics simulation to investigate the influence of solvent effects and solute-solvent interaction on solute solubility. Meanwhile, there were four activity coefficient models being used to correlate the solubility data and Average relative deviation of models are 4.13% (Margules model), 3.94% (NRTL model), 4.49% (NRTL-SAC model) and 3.06% (UNIQUAC model), respectively, all of which do not exceed 5%. It manifests that the four activity coefficient models can fit the experimental values well, in which the UNIQUAC model gives the best regression effect. Moreover, the apparent thermodynamic properties( △ sol G° , △ sol H° and △ sol S° ) of perphenazine in various solvents were calculated by Van’t Hoff equation. In accordance with the analysis and calculation of dissolution, the dissolution process is an endothermic entropy-driven process. This research can provide basic data for the crystallization process of perphenazine.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2023
·
IF 3.8
ChuanYu Lan,Yuandong Wu,Dajiang Mei,Shaoguo Wen,Thomas Doert
Three new complexes, namely (5,7-Dichloro-8-hydroxyquinoline)PbX (X=Br, I) ( 1, 2 ) and Pb2(5,7-Dichloro-8-hydroxyquinoline)4 ( 3 ), were synthesized through solvent evaporation at ambient temperature. The crystal structures and fluorescence emission properties of these complexes were systematically investigated. An analysis using single crystal X-ray diffraction revealed that complexes 1 - 3 form pseudo-dimeric structures through the interaction between lead and neighboring oxygen via secondary contacts. A comparison between the structures of complex 2 and [Pb(μ-Q)I] 2 , a complex of PbI 2 with 8-hydroxyquinoline, showed that the coordination polyhedron changed from a triangular pyramid to a distorted tetrahedron. This change may be attributed to the site resistance effect of the chlorine substituents coordinated to the quinoline ring. Complex 3 has a layered structure formed through secondary contacts and intramolecular hydrogen bonding C-H⋯O and C-H⋯Cl among the lamellar molecules. The maximum emission peak at 489 nm, 505 nm, and 543 nm for complex 1-3 can be assigned to the ligand-to-metal charge transfer (LMCT). The maximum emission peaks were red-shifted by 22 nm, 38 nm, and 75 nm, respectively, compared to the ligand. The number of ligands increases the conformational rigidity of the structure and the electron density on lead atoms causing the molecular structure to change, the energy alters, and the fluorescence peaks to move in the long-wave direction.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）