VACUUM
·
2024
·
IF 3.8
Na Liu,Weiyi Bu,You Zhou,Yan Zhang,Xiaohong Chuai,Geyu Lu
Metal-organic frameworks (MOF)-derived materials have been a research hotspot in the field of gas sensor. In this work, the MOF-derived spindle-like In 2 O 3 mixed with the ZIF-67 was calcined to obtain xCo-In (x = 0.03, 0.05, 0.07) sensing composite materials. Various characterization techniques, such as XRD, SEM, TEM, UV–vis and XPS were adopted to analyze their crystalline structures, detailed morphology structures, texture properties, bandgap width and element valence states. For In 2 O 3 /Co 3 O 4 composites, their sensing properties for acetone are greatly improved compared with pure In 2 O 3 , and the response of 0.05Co-In to 100 ppm acetone can reach 226.1 at an operating temperature of 175 °C with a response time of 1 s In 2 O 3 /Co 3 O 4 composites remained the morphologies of MOF templates, exhibiting large specific surface area. Combining the gas-sensitive behavior with characterization results, the effect of heterojunction between In 2 O 3 and Co 3 O 4 is discussed. Their interface interaction increases the ratio of Co 2+ /Co 3+ , content of oxygen vacancy/adsorbed oxygen, and material resistance, being important reasons for the improved sensing performance. The prominent interface effect may originate from Co 3 O 4 which has the variable valence ion. This work provides a strategy for constructing heterojunction to achieve a high-performance gas sensor.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2024
·Vol. 20
·期 52
·2407599
·
IF 13
Tong Wu,Fang Ren,Zhengzheng Guo,Jiaqi Wang,Ze Zong,Lunwu Wang,Yanling Jin,Zhengyan Chen,Penggang Ren
The proliferation of electronic devices drives the adoption of electromagnetic wave (EMW) absorbing materials to mitigate electromagnetic pollution. Metal-organic frameworks (MOFs) reveal great potential in EMW absorption field due to their unique pore structure and outstanding physicochemical properties. However, single MOFs are difficult to achieve both efficient absorption and wide frequency coverage owing to the limited electromagnetic properties and structural composition. Herein, a sandwich-like ternary MOF composite is successfully synthesized through a hierarchical assembly strategy. Following high-temperature treatment, the materials are converted into nitrogen-doped porous carbon with magnetic metals, non-magnetic metal oxides, and carbon nanotubes on the surface (labeled as TiO 2 /C@Co/N/C@CNT). The unique sandwich structure of the resulting derivatives provides a multi-level microstructure and multi-component synergistic effects, significantly enhancing electromagnetic wave absorption capabilities and broadening the effective absorption bandwidth (EAB). At 1.8 mm matching thicknesses, the material achieves a reflection loss of −56.3 dB and a 6.6 GHz EAB. Adjusting the matching thicknesses to 2.3 and 3.1 mm extends the EAB to 6.1–18 GHz, with absorption peaks of −47.6 and −47.1 dB. This work offers a novel guidance for constructing advanced MOF-derived materials with ultra-broadband EAB and strong EMW absorption through meticulous structural design and multiple components combination.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2025
·Vol. 13
·期 8
·5882-5897
·
IF 9.5
Siyue Hui,Huanzhi Zhang,Guangpeng Xu,Junhao Zhang,Fen Xu,Lixian Sun,Xiangcheng Lin,Lei Ma,Hongliang Peng,Bin Li,Erhu Yan,Federico Rosei
Thermal insulation and temperature control are extremely important in numerous human activities. Traditional aerogels with low thermal conductivity are known to facilitate good insulation. Boron nitride (BN) aerogels consist of nanoscale nanofiber units with plentiful porous structures, possessing excellent thermal/electrical insulation and chemical stability. However, these porous materials cannot effectively block heat transmission, despite their low thermal conductivity. Therefore, it is necessary to develop a new insulation strategy and explore materials with excellent thermal insulation performance, with special attention to heat transmitted not only through air, but also through thermal regulation by thermal adsorption. Phase change materials (PCMs) are considered promising latent heat storage materials due to their large heat storage capacity, making them promising candidates for highly efficient thermal insulation. However, the flammability of organic PCMs and their susceptibility to leakage during the solid-to-liquid transition seriously limit their wide application. In this study we combined the dual-thermal insulation performance of BN fiber aerogels and PCMs and constructed novel flexible and multifunctional composites with excellent thermal insulation performance using Co-MOF nano-flower cross-linked BN aerogels as interconnected porous substrates to encapsulate paraffin wax (PW) PCMs. The composites exhibited the advantages of BN, Co-MOFs and PCMs, overcoming the drawbacks of single-component materials. The results showed that the latent-heat storage capacity of the BN/Co-MOF/PW composites reached 188.11 J g−1 and the resulting thermal conductivity was as low as 0.0397 W (m−1 K−1), due to high thermal insulation performance. The morphology, flexibility, mechanical performance, and flame retardancy of the constructed BN/Co-MOF/PW composites were systematically investigated, ensuring that the composites could be used for thermal insulation and flame-retardant applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2025
·Vol. 36
·期 9
·1-13
·
IF 2.8
Xu Wenwen,Wang Sheng,Ma Wei,Lv WenGuang,Fu Xin
In response to the escalating demand for lightweight, broadband and high-efficiency microwave-absorbing materials driven by the rapid advancement of electronic information technology, this study proposes a novel solution involving the fabrication of aluminum nitride (AlN)-decorated cobalt carbide (CoC) nanocomposites via an oil-bath method. The incorporation of rigid and insulating AlN significantly enhances the thermal stability and microwave absorption (MA) performance of the AlN/CoC composites. Notably, in the 80 wt% AlN/paraffin composite system, a minimum reflection loss (RL min ) of − 43.2 dB and an effective absorption bandwidth of 1.76 GHz (13.92–15.68 GHz) were achieved, which is markedly superior to that of the CoC/paraffin composite under the same filling ratio (− 8.28 dB). The results indicate that the substantial enhancement in the MA properties of the AlN/CoC composites is primarily attributed to the influence of varying AlN contents on the dielectric loss, polarization loss, and impedance matching behavior of the material. This study provides new insights and methodologies for the development of lightweight, broadband, and high-efficiency microwave-absorbing materials. The design strategy of AlN/CoC composites holds great potential for widespread application in fields such as aerospace, electromagnetic shielding, and radar stealth.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2024
·Vol. 191
·期 8
·1-10
·
IF 5.3
Liao Song,Gui Liuyang,Yang Yufan,Liu Yiwei,Hu Xiaopeng
A dual-mode fluorescence/visual aptasensor was developed for straightforward and accurate determination of aflatoxin B1 (AFB1) based on an Au/metal–organic framework (Au/MOF) composite. Aptamer-modified Au/Fe 3 O 4 (Apt/Au/Fe 3 O 4 ) served as the recognition element, and Au/MOF modified with complementary chains and 3,3′,5,5′-tetramethylbenzidine (cDNA/TMB/Au/MOF) acted as the fluorescence and visual probes. These components are integrated to form conjugates (Apt/Au/Fe 3 O 4 -cDNA/TMB/Au/MOF). Upon the introduction of AFB1, some cDNA/TMB/Au/MOF dissociated from Apt/Au/Fe 3 O 4 , enabling the use of detached probes for visual detection. The undecomposed conjugates were isolated magnetically for use in fluorescence detection. As the AFB1 concentration increases, the visual signal intensifies and fluorescence intensity diminishes. Thus, the proposed aptasensor achieves the simultaneous fluorescence and visual determination of AFB1, obviating the need for material and reagent substitutions. The detection limits were established at 0.07 ng mL −1 for the fluorescence mode and 0.08 ng mL −1 for the visual mode. The effectiveness of the aptasensor was further validated by quantifying AFB1 in real samples. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED ORGANOMETALLIC CHEMISTRY
·
2024
·
IF 3.7
Na Chen,Yuan Li,Yang Pan,Haozhe Wang,Hao Gu,Yuan Sun,Tiedong Sun
The emergence of bacterial resistance has a negative impact on the conventional antimicrobial treatments, and research into the development of the new antimicrobial materials is of great significance. Multimodal synergistic antimicrobial materials exert better antimicrobial effects compared with a single modality. In recent years, Polyoxometalate (POM) has shown great potential in the biomedical field due to its high catalytic activity and high photothermal conversion ability. However, owing to its small surface area, its applications have been greatly limited. Herein, we designed a H 2 O 2 self-supplied CDT and PTT bimodal nanogeneration material (i.e., CaO 2 /POM@MOF) possessing a larger surface area for the treatment of the bacterial infections, in which CaO 2 could release O 2 and H 2 O 2 in the weakly acidic microenvironment of bacterial infection and the dual catalytic site of POM@MOF could enhance the CDT reaction to generate ROS, resulting in the bacterial oxidative stress and the leakage of the bacterial contents, and the exposure to the NIR light generates localized high temperature that cause the rupture of bacterial cell membranes and the denaturation of their proteins. Meanwhile, the superior stability of POM@MOF can release fewer metal ions to improve its biocompatibility. The in vitro antimicrobial experiments demonstrated that CaO 2 /POM@MOF possessed the combined CDT and PTT effect and exhibited excellent antimicrobial efficacy. This work presents a promising strategy to combat the bacterial infections.
✓ 已验证
产品关联
DOI
高影响因子
EUROPEAN JOURNAL OF INORGANIC CHEMISTRY
·
2024
·
IF 2.2
Mohan Chen,Yichao Wang,Ziwen Fan,Yue Wang,Zheng Niu,Jianping Lang
Graphical We prepared a series of fluorinated MOFs through the post- synthesis modification of the classic Zr-based MOF-808. The fluorinated alkane pores within MOFs can enhance the forces between the framework and C 2 H 2 , therefore, the difference in the adsorption capacity to C 2 H 2 and C 2 H 4 making it possible to effectively separate the C 2 H 2 /C 2 H 4 mixture at room temperature. The separation of ethylene (C 2 H 4 ) and acetylene (C 2 H 2 ) is challenging due to their similar molecular dimensions and boiling points, making conventional methods like cryogenic distillation and solvent extraction inefficient and environmentally harmful. Fluorinated metal-organic frameworks (MOFs) have been proven to be an effective material for the separation of C 2 H 4 and C 2 H 2. However, their direct synthesis is relatively expensive and challenging. In this study, we report a facile post-synthetic modification strategy to introduce fluorinated alkane pores into a zirconium-based MOF, MOF-808. The construction of fluorine-containing pores within the MOFs prefers adsorption for C 2 H 2 attributed to the interaction between the fluorine atoms and C 2 H 2 . This series of fluorinated MOFs demonstrates potential for gas separation processes, with the highest separation ratio reaching 2.67 (1 : 99) at 298 K. Breakthrough experiments for C 2 H 2 /C 2 H 4 mixtures confirmed that fluorinated MOF is capable of separating C 2 H 2 /C 2 H 4 , making it a potential candidate for industrial application. Moreover, the simplicity of the post-synthetic modification method suggests a viable strategy for the synthesis of fluorinated MOFs.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2024
·
IF 5.3
Yuhui Xue,Jingjing Wang,Meng Wang,Jiang Li,Kefu Wang,Afaq Hassan,Changyan Guo,Jide Wang
The efficient removal of antibiotic residues from aqueous solution is very important for water security. Studies have found that adsorption is widely used for the removal of antibiotics due to its cost-effectiveness, low energy consumption, simplicity of operation, and environmental friendliness. In this study, a novel magnetic porous carbon adsorbent (Ni-MPC-400) with a high adsorption capacity and saturation magnetization was synthesized via direct carbonization of Ni-MOF at 400 °C pyrolysis temperature and used to efficiently remove tetracycline from an aqueous solution. Adsorption experiments showed that Ni-MPC-400 exhibited excellent tetracycline adsorption capacity (441.51 mg·g–1) from the aqueous solution. Possible adsorption mechanisms were proposed through characterization and analysis. The adsorption mechanisms mainly involved π–π interactions, hydrogen bonding, metal–organic complexation, and pore filling effects. In addition, Ni-MPC-400 showed rapid and sufficient adsorption at a low concentration of tetracycline (5 mg·L–1) and good adsorption performance over a wide pH range. In addition, the material has been tested to have good immunity to interference and regenerative capacity, demonstrating a potential application in the removal of tetracycline contaminants from aqueous solutions.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2024
·
IF 8.3
Rong Liu,Yan Gao
Titanium alloys are widely used in marine environments and medical fields due to their excellent corrosion resistance and high specific strength. However, their good biocompatibility can lead to severe biofouling, thereby limiting their effectiveness. To inhibit biofouling on the surface of titanium alloys, this study proposes an antifouling solution, which involves the in situ preparation of Cu-MOF film on titanium alloys by leveraging the antibacterial properties of Cu ions. Here, the dense and stable TiO2 film on the surface of Ti-6Al-4V titanium alloy was removed by alkali-heat treatment; meanwhile, a porous surface structure was simultaneously obtained where OH– ions were retained. In the subsequent step, the retained OH– ions in the pores attracted Cu2+ ions in solution to form Cu(OH)2 in the pores, providing active sites for the formation of Cu-MOFs. Subsequently, Cu(OH)2 reacted with organic ligand (1,3,5-benzenetricarboxylic acid, BTC) at room temperature to form Cu-MOFs in the pores, which then grew quickly to cover the alkali-heat-treated surface within 1 h. The formation mechanism of Cu-MOF film on Ti-6Al-4V was elucidated, which provides a reference for designing and preparing multifunctional MOF film in situ on titanium alloys. The stability of in situ-grown Cu-MOF samples and their inhibitory effects on bacteria and microalgae have also been verified. The results indicate that although the stability of Cu-MOFs is relatively poor, their bactericidal and algicidal effects are extremely significant, suggesting that this material has significant potential for short-term applications that require high antibacterial performance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2024
·
IF 4
Shili Hou,Mingzhen Wen,Jiaxin Wei,Lifen Li,Guangyan Liu
In this study, novel honeycomb-like morphology MXene@PDA/MOF composites were prepared in situ on the surface of MXene@PDA (polydopamine), combined with 2-methylimidazole and Zn 2+ . The characterizations of morphology and electrochemical properties show that MXene@PDA/MOF has large specific surface areas and outstanding electroconductibility. Furthermore, the MXene@PDA/MOF-based sensor was fabricated to detect l-cysteine (L-Cys). The response of differential pulse voltammetry (DPV) shows the current intensity increases as l-Cys concentration. Under the optimum conditions, DPV response shows a fine linear relationship with l-Cys concentration in a range of 0.01 – 5.0 μmol L −1 with the detection limit of 3.74 × 10 −9 mol L −1 . This sensor was used to detect l-Cys in real samples with recoveries of 100.34 % – 101.68 %. Thus, the MXene@PDA/MOF-based electrochemical sensor exhibits excellent selectivity, reproducibility, stability, and practicability.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2025
·
IF 5.4
Kaikai Xu,Lulu Kong,Kebin Ye,Beibei Xu,Yongming Deng,Yicheng Wang,Shaohua Wei
Phthalocyanine (Pc) is a promising class of metalloantibiotics with antibacterial properties, akin to many metalloantibiotics, that exerts its effect by disrupting the bacterial respiratory chain. Therefore, it is particularly crucial to develop simple and efficient antibacterial strategies to enhance the activity of antibiotics. The construction of metal–organic frameworks (MOFs) helps to improve the electron transfer ability of phthalocyanine antibacterial drugs and enhance their antibacterial activity. In this study, we report the synthesis of a two-dimensional (2D) NiPc-Cu MOF using a modified liquid–liquid interfacial method, offering a facile, scalable, and stable approach. The excellent electron transfer properties of the MOF significantly enhance the ability of NiPc to disrupt the respiratory chain, thereby boosting its antibacterial activity. Compared to NiPc alone, NiPc-Cu MOF demonstrated a 1000-fold reduction in the minimum inhibitory concentration (MIC 50 ) against Escherichia coli ( E. coli ), reaching 4 ng/mL—a level surpassing most reported metalloantibiotics and comparable to clinically used antibiotics. Furthermore, NiPc-Cu MOF selectively targets bacteria with minimal cytotoxicity to animal cells. Based on this, we have developed NiPc-Cu MOF as a safe antibacterial coating for catheters, characterized by excellent stability and superior antibacterial activity. This study provides a straightforward and effective strategy for enhancing the activity of molecular drugs that exert antibacterial effects by interfering with the respiratory chain.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2024
·Vol. 48
·期 28
·12535-12543
·
IF 2.7
Bo Sun,Man Li,Lifeng Cheng,Qijian Li,Xiaowen Chen,Shengqi Wang,Wenhua Yan,Lei Wang,Fuxiang Wei,Qingliang Wang
Transition metal oxides (TMOs) have excellent electrochemical properties. However, they are commonly associated with short cycle lives, agglomeration, and lower electrical conductivity. To ameliorate these drawbacks, porous rod-shaped CuO@Co3O4 has been synthesized through calcination with optimized oxidation temperature by using CuCo-MOF-74 as a template. Due to the porous structure, the CuO@Co3O4 electrode significantly increases the contact area with the electrolyte and greatly improves the reaction kinetics. As a result, the CuO@Co3O4 electrode exhibits excellent electrochemical performance with a specific capacitance of 545.5 F g−1 at a current density of 1 A g−1. The capacitance retention at 10 A g−1 was 88.7% after 10 000 cycles. Furthermore, an asymmetric supercapacitor (SC) has been assembled with CuO@Co3O4 as the positive electrode and commercial reduced graphene oxide (RGO) as the negative electrode, and the device has exhibited an energy density of 38.2 W h kg−1 at a power density of 1268.3 W kg−1. Impressively, the capacitance retention remained 83.2% even after 10 000 cycles at a high current density of 10 A g−1. This performance has demonstrated the potential of CuO@Co3O4 as an anode material for SCs.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）