ELECTROCHIMICA ACTA
·
2015
·
IF 4.504
H. Tang,X.H. Xia,Y.J. Zhang,Y.Y. Tong,X.L. Wang,C.D. Gu,J.P. Tu
Construction of high-capacity anode is highly important for the development of next-generation high-performance lithium ion batteries (LIBs). Herein we fabricate Si/Ag nanowires/reduced graphene oxide (Si/Ag NWs/rGO) integrated composite film by introducing binary conductive networks (Ag NWs and rGO) into Si active materials with the help of a facile vacuum-filtration method. Active Si nanoparticles are homogeneously encapsulated by binary Ag NWs-rGO conductive network, in which Ag NWs are interwoven among the rGO sheets. The electrochemical properties of the integrated Si/Ag NWs/rGO composite film are thoroughly characterized as anode of LIBs. Compared to the Si/rGO composite film, the integrated Si/Ag NWs/rGO composite film exhibits enhanced electrochemical performances with higher capacity, better high-rate capability and cycling stability (1269 mAh g −1 at 50 mA g −1 up to 50 cycles). The binary conductive network plays a positive role in the enhancement of performance due to its faster ion/electron transfer, and better anti-structure degradation caused by volume expansion during the cycling process.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2024
·
IF 2.7
Yang Liu,Linfeng Sheng,Muhammad Abdullah,Xing Shen,Ying He,Juan Liu,Xin Chen
In situ liquid cell electron microscopy technology has high temporal and spatial resolution, enabling real-time observation of physical and chemical processes in liquid environments. However, the common in situ liquid cell scanning electron microscopy (LC-SEM) technology has faced limitations due to the relatively large thickness of the SiNx window, resulting in unsatisfactory resolution, limiting the broad adoption of the LC-SEM technology. This article represents one novel approach of utilizing ultra-thin SiNx windows for LC-SEM observation of the distribution and dynamic changes of gold (Au) nanoparticles/zinc oxide quantum dots (ZnO QDs)/reduced graphene oxide (rGO) ternary composites in liquid. The results demonstrate a single/near-single dispersed distribution of ZnO QDs on the surface of the rGO, with Au nanoparticles and ZnO clusters mainly concentrated on the rGO folds. The composite structure demonstrates relative stability, attributed to electrostatic forces. Using Au nanoparticles and ZnO QDs as hierarchical reference markers, a high LC-SEM image resolution of ~4 nm is obtained, which allows the observation and motion analysis of the Au nanoparticles, rGO nanosheets, as well as ZnO QDs in the liquid cell. Such LC-SEM technology shows good repeatability on the noble-metal/ZnO-QDs/rGO ternary composite samples, with good potential for the future QD composite material researches.
✓ 已验证
产品关联
DOI
高影响因子
Nano Materials Science
·
2025
·
IF 17.9
Haineng Bai,Cheng Feng,Yiru Chen,Yunxiao Du,Yamin Feng,Kuili Liu,Yali Yan,Jia Liu,Baohua Zhang,Jin Wang,Dunjun Chen,Youdou Zheng,Fuqiang Guo
The porous NiO nanoplates modified with rGO nanosheets and SnO 2 nanoparticles are developed for accurate and rapid ppb-level NO 2 detection. The developed SnO 2 /NiO/rGO sensor towards 50 ppm NO 2 gas demonstrates an excellent gas-sensing response of 14.8 at 23 °C, which is 3.03 times that of NiO/rGO sensor (4.89) and 6.49 times that of NiO sensor (2.28), respectively. The developed SnO 2 /NiO/rGO sensor exhibits faster response/recovery speed (12.7/32.8 s @5 ppm), with extra-low theoretical detection limit of 0.15 ppb at room temperature. More fascinatingly, our sensors indicate great sensitivity, outstanding repeatability and long-term stability for longer than 7 weeks. Additionally, it also suggests that 1 °C and 1 % relative humidity have the same effect on the SnO 2 /NiO/rGO sensor signal as approximately 13 ppb and 7.0 ppb NO 2 gas change, respectively. Such excellent properties are mainly attributed to the large surface-to-volume ratio, which provides active sites to NO 2 gas spread, adsorption and diffusion on material surface in redox reaction. Moreover, the ternary heterojunctions formed by NiO, rGO and SnO 2 may serve as highly conductive channels to accelerate carrier transfer and abundant oxygen vacancies to reduce the adsorption energy for O 2 and NO 2 gas, thus further improving performance of the sensors.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2024
·
IF 12.2
Min Du,Haokun Shi,Rui Yin,Jianlei Yang,Fulin Shi,Qinggong Zheng,Yu Zhou,Ruixue Guo,Wanqing Wu
Oil spills are a global environmental protection challenge, and traditional adsorption materials have poor effect on low temperature and high viscosity marine oil spills. This article reports composite adsorption materials TDA/rGO@WS for viscous oil spills: loaded with rGO/TDA coating on a commercial biomass wood pulp sponge (WS), achieving Joule heating , photothermal effect and hydrophobic modification. The results showed that the TDA/rGO@WS has good photothermal conversion ability and Joule heating ability, and the temperature increased to 83.7 °C and 148 °C, respectively, under simulated solar irradiation and additional voltage at room temperature. The efficiency of adsorption at a low temperature of 5 °C increased by 22.41% at 1 sun and by 51.53% at 10 V. Temperature effectively reduced the viscosity of the offshore oil spill and ensures the efficient adsorption of oil spills at low temperatures promoted. The TDA/rGO@WS also showed good hydrophobicity (WCA=129°), excellent efficiency of water–oil separation (99.53%) and good adsorption capacity (9.4–13.68 g/g) for marine fuel oils. TDA/rGO@WS effectively solves the problem of cleaning up high–viscosity oil spills from ships in winter and polar waters, and proposes a new strategy for all–weather efficient treatment of oil spills at sea.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Catalysts
·
2025
·Vol. 15
·期 3
·197
·
IF 4
Yu Zhou,Kaixin Zheng,Yihao Zhang,Yong Zhao,Zhi Ouyang,Xu Zhang,Xianhua Liu
Black-odorous water (BOW) in urban areas poses significant risks to water safety and human health. Chemical oxygen demand (COD) is a critical parameter for the control and monitoring of BOW. However, traditional methods for COD determination are expensive, time-consuming, and involve the use of hazardous chemicals. In this study, reduced graphene oxide (rGO) and transitional metal particles (Cu, Ni) were used as working electrode materials for facile on-site determination of COD in BOW. Three composite materials (rGO/Cu, rGO/Ni, and rGO/Cu/Ni) were synthesized by one-step chemical reduction with different ratios, and their microstructure and chemical composition were characterized. Glucose solution and real water were used to evaluate the electrocatalytic performance of the different sensors. The ternary composite (rGO/Cu/Ni) screen-printed electrode sensor demonstrated excellent performance in COD analysis, with a low limit of detection (18.9 mg L−1), a broad linear detection range from 53 to 1500 mg L−1, and a 1.61% relative error for real water samples. The testing results were highly consistent with those obtained using the standard chromium sulfate method. This study offers promising prospects for the mass production of cost-effective COD electrochemical sensors, facilitating real-time, on-site monitoring of water bodies in major urban areas.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2021
·
IF 4.821
Shufang Ren,Runyan Feng,Shounian Cheng,Liqiu Huang,Qingtao Wang,Zhixiang Zheng
In this work, an ultrasensitive electrochemical sensor towards quantitative detection of acetaminophen (AP) based on hybrid of metallic 1 T and semiconductive 2H phase molybdenum disulfide (1 T/2H MoS 2 ) anchored on rGO sensing platform was constructed. The XRD, FESEM, FETEM and XPS analysis indicates that nanoflowers 1 T/2H MoS 2 with walnut-like fold structure were in-situ loaded onto the surface of rGO nanosheets by the hydrothermal approach. The formation of stabilized 1 T MoS 2 is associated with the influence of GO. The electrochemical tests of CV, EIS and DPV show that the hybrid composite MoS 2 /rGO remarkably promoted the detecting performance owing to the increased conductivity of 1 T MoS 2 that can facilitate charge transfer kinetics, the great active sites on both basal and edge of planes of 1 T/2H MoS 2 and the synergic effect of 1 T/2H MoS 2 and rGO. After the test condition optimization, MoS 2 /rGO/GCE sensor has great electrocatalytic activity towards AP with wide linear range of 0.005–300 μM and low limit of detection of 1.7 nM (S/N = 3). Furthermore, the sensor shows excellent stability, repeatability, reproducibility and anti-interference performance. All results proved that the GO-assisted hydrothermal prepared hybrid 1 T/2H MoS 2 /rGO is promising material for electrochemical analysis.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Xiao Yan,Fang Liu,Hengfeng Zhao,Xinghua Jiang,Jianhua Guo
Traditional microwave absorbing materials often exhibit inflexibility, fragility, and limited functionality, thereby restricting their applications in diverse environments. To address these limitations, our study introduces FCIP/RGO hybrid powders with a core–shell structure prepared via plasma-assisted ball milling. These hybrid powders serve as the functional core when crosslinked with PUU elastomer to form a multifunctional FCIP/RGO/PUU composite. This functional core not only enhances the mechanical properties of the composite, achieving a tensile strength of 49.2 MPa, but also endows it with exceptional microwave absorption capabilities, characterized by a RL min of − 52.31 dB and a substantial EAB of 7.03 GHz. Furthermore, the FCIP/RGO functional core plays a crucial role in facilitating efficient microwave and infrared photothermal conversion. The integration of the thermal conversion capabilities with the PUU matrix, which features disulfide bonds and multiple hydrogen bonds, enables the composite to achieve rapid self-healing performance. Specially, after just 1 h of microwave treatment, it can recover up to 93 % of its original mechanical properties. In addition, the composite also boasts shape memory capabilities that can be triggered by infrared stimuli. With these unique properties, the FCIP/RGO/PUU composite holds significant potential for advanced applications such as wearable devices, deformable robots, and chip protection.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2022
·
IF 14.224
Dongdong Chu,Haoran Dong,Yangju Li,Junyang Xiao,Xiuzhen Hou,Shuxue Xiang,Qixia Dong
In this work, sulfur/nitrogen modified reduced graphene oxide (S/N-rGO) was employed as both electron shuttle and support to fabricate Fe-Mn bimetallic organic framework@S/N-rGO hybrids (BOF@S/N-rGO) via a facile two-step solvothermal route. Compared with the transition metal ions (Fe 2+ /Mn 2+ ), the classical metal oxide catalyst (Fe 2 O 3 and Fe 3 O 4 ) and nano zero-valent iron (nZVI), BOF@S/N-rGO catalyst can more effectively activate peroxydisulfate (PDS) with ultra-low concentration (0.05 mM) to degrade sulfamethazine (SMT). Quenching experiments, electron paramagnetic resonance (EPR) measurement and linear sweep voltammetry (LSV) showed that the activation pathways of PDS between the two catalysts were different. In BOF@N-rGO+PDS system, the degradation of SMT was mainly attributed to the oxidation of radicals including SO 4 •− and •OH, especially SO 4 •− . However, in BOF@S-rGO+PDS system, in addition to the radical pathway, there are also non-radical pathways, namely 1 O 2 and direct electron transfer . Furthermore, the applicability of BOF@S/N-rGO used in the PDS-mediated advanced oxidation processes (AOPs) was systematically investigated in terms of the effects of operating parameters and coexisting substance (anions and humic acid (HA)), the degradation of other pollutants, as well as the stability and reusability of the catalyst. This study proved that BOF@S/N-rGO was a promising activator of PDS with ultra-low concentration for the degradation of SMT.
✓ 已验证
DOI
PubMed
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2021
·
IF 7.46
Rui Gao,Lang Gao,Xianfa Zhang,Shan Gao,Yingming Xu,Xiaoli Cheng,Ghuanyu Guo,Qinghua Ye,Xin Zhou,Zoltán Major,Lihua Huo
ZnO@the reduced graphene oxide (rGO) nanorod arrays were grown in-situ on the ceramic tube substrate by one-step hydrothermal without any template or surfactant. The reduced graphene oxide was evenly coated around the ZnO nanorods through the controllable assembly of the rGO and ZnO heterojunction interface. rGO contributed to the improvement of material conductivity and provided more active sites to adsorb NO 2 molecules. The combination of rGO and ZnO significantly enhanced the response of the composite to NO 2 at room temperature . It showed an excellent selectivity to NO 2 and a good linear relationship in the concentration range of 0.1∼10 ppm. In order to explore the response mechanism of ZnO@rGO composite to NO 2 , the change of element composition and status was performed by XPS technology before and after the exposure of the composite to NO 2 . The gaseous products after the reaction were also tested by GC–MS technology. DFT calculations were performed based on the test results, which demonstrated that the p-n heterostructure produced by the ZnO@rGO composite had a beneficial effect on improving the gas response capability.
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2024
·
IF 7.1
Jiaxin Liu,Mingdi Pan,Jiuzeng Jin,Yunshu Lu,Zhongmin Feng,Ting Sun
17β-E2 was the most active sterol estrogen and was widely used in animal husbandry for animal fattening and increasing milk production. Its abuse has resulted in residues in the environment. However, even very low concentrations could still enter the human body through the enrichment of the food chain and have adverse effects on the endocrine system. The SERS analysis method was employed in this work for the trace detection of 17β-E2 in environmental water. Cheap Ag NPs were selected as SERS sources. MoS2 provided a platform for the orderly arrangement of Ag NPs while making the material self-cleaning. rGO was coated in the outermost layer and had a protective effect on Ag NPs and could avoid oxidation during storage and use. At the same time, the target molecule could be adsorbed to reduce the distance between itself and Ag NPs, thus enhancing the SERS signal. The material had a high SERS enhancement factor (EF = 1.95 × 107), low detection limit (LOD = 5 × 10–12 M), good linear relationship (R2 = 0.994), good stability (RSD = 4.74%), and strong anti-interference ability. The recovery of 17β-E2 in farm wastewater samples was 100.15–108.00% and RSDs were 1.09–2.57%.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2024
·Vol. 30
·期 4
·2345-2355
·
IF 2.4
Zhang Yi,Liu Yanmeng,Xu Wanzhen,Huang Weihong,Chen Ting,Ding Hua,Wang Baozhi,Yang Wenming
In recent years, the detection and monitoring of cadmium (Cd(II)) have gained considerable attention due to its widespread applications in various industries, such as electronics, batteries, and coatings, and its classification as a highly hazardous pollutant. This study presents the development of a novel electrochemical sensor based on ion-imprinted polymers (IIPs) and reduced graphene oxide-titanium oxide (rGO@TiO 2 ) for the selective and sensitive detection of Cd(II). Under optimized experimental conditions, the electrochemical sensor displayed a satisfactory linear relationship in the concentration range of 10 −8 to 10 −5 mol L −1 , with a lowest detection limit of 1.2 × 10 −8 mol L −1 . The sensor exhibited excellent repeatability, stability, high sensitivity, and strong selectivity. Finally, the electrochemical sensor was successfully applied to determine trace Cd(II) in practical samples. This novel electrochemical sensor based on IIPs and rGO@TiO 2 holds great potential for practical applications in environmental monitoring and pollution control, providing a promising tool for the accurate and efficient detection of hazardous pollutants like Cd(II).
✓ 已验证
DOI
高影响因子
ANALYTICAL LETTERS
·
2026
·
IF 1.8
Jiahui Liu,Yan Xu,Tongtong Ran,Zhilei Li,Jianping Zhou
Indole-3-acetic acid (IAA) is an important plant hormone and its rapid determination is useful for evaluating plant growth and physiological status. In this work, a screen-printed carbon electrode (SPCE) modified with a composite of MXene, gold nanoparticles (AuNPs), and reduced graphene oxide/carbon nanofibers (rGO-CNFs) incorporating an electrospun carbon-nanofiber network was developed for the voltammetric determination of IAA. The composite was characterized by morphological, structural, and chemical analyses. The modified electrode showed a larger electrochemically active area and lower charge-transfer resistance than the bare SPCE. Under optimized conditions, least-squares regression over 0.05–125 µM based on six concentration levels gave a slope of 1.060 ± 0.016 µA µM−1, a limit of detection (LOD) of 12.1 nM, and a limit of quantification (LOQ) of 40.3 nM. In buffered model solutions, the electrode showed acceptable selectivity, fabrication repeatability, and short-term electrochemical stability. These results support the MXene-AuNPs/rGO-CNFs-modified SPCE as a low-cost platform for IAA determination, while validation in real plant matrices remains necessary.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）