JOURNAL OF HAZARDOUS MATERIALS
·
2024
·
IF 12.2
Xia Liu,Ming Chen,Dengjun Wang,Feng Du,Nan Xu,Wu Sun,Zhaoxiang Han
Iron-based materials such as nanoscale zerovalent iron (nZVI) are effective candidates to in situ remediate hexachromium (Cr(VI))-contaminated groundwater . The anaerobic bacteria could influence the remediation efficiency of Cr(VI) during its cotransport with nZVI in porous media . To address this issue, the present study investigated the adsorption and reduction of Cr(VI) during its cotransport with green tea (GT) modified nZVI (nZVI@GT) and iron sulfides (FeS and FeS 2 ) in the presence of D. vulgaris or S. putrefaciens in water-saturated sand columns. Experimental results showed that the nZVI@GT preferred to heteroaggregate with FeS 2 rather than FeS, forming nZVI@GT-FeS 2 heteroaggregates. Although the presence of D. vulgaris further induced nZVI@GT-FeS 2 heteroaggregates to form larger clusters, it pronouncedly improved the dissolution of FeS and FeS 2 for more Cr(VI) reduction associated with lower Cr(VI) flux through sand. In contrast, S. putrefaciens could promote the dispersion of the heteroaggregates of nZVI@GT-FeS 2 and the homoaggregates of nZVI@GT or FeS by adsorption on the extracellular polymeric substances , leading to the improved transport of Fe-based materials for a much higher Cr(VI) immobilization in sand media. Overall, our study provides the essential perspectives into a chem-biological remediation technique through the synergistic removal of Cr(VI) by nZVI@GT and FeS in contaminated groundwater. Environmental implication The green-synthesized nano-zero-valent iron particles (nZVI@GT) using plant extracts (or iron sulfides) have been used for in situ remediation of Cr(VI) contaminated groundwater. Nevertheless, the removal of Cr(VI) (including Cr(VI) adsorption and Cr(III) generation) could be influenced by the anaerobic bacteria governing the transport of engineered nanoparticles in groundwater. This study aims to reveal the inherent mechanisms of D. vulgaris and S. putrefaciens governing the cotransport of nZVI@GT combined with FeS (or FeS 2 ) to further influence the Cr(VI) removal in simulated complex groundwater media. Our findings provides a chemical and biological synergistic remediation strategy for nZVI@GT application in Cr(VI)-contaminated groundwater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER DEGRADATION AND STABILITY
·
2024
·
IF 6.3
Jinke Yu,Ling Sun,Lan Ding,Yufei Cao,Xiaohui Liu,Yuanlin Ren,Yuesheng Li
When confronted with a fire, the flammability of rigid polyurethane foam (RPUF) makes it extremely easy to burn violently. In this work, a green biomass derived flame retardant coating was synthesized with phytic acid as acid source, D-sorbitol as carbon source and glycine as gas source. A simple UV curing technique was used to improve the flame retardancy of RPUF . Coated RPUF exhibited a limiting oxygen index value of up to 39.7 % and successfully met UL-94 testing criteria with V-0 rating. In comparison to control RPUF, coated RPUF showed an extended ignition time of 3 s, a remarkable reduction of approximately 60 % in the peak heat release rate, and possessed commendable smoke suppression property. The flame retardant mechanism was analyzed, unveiling the emergence of compact char residue on the surface of coated RPUF after burning, accompanied by the liberation of non-combustible gases. Therefore, these results demonstrated that cost-effective UV-curable flame retardant coating forms protective char layer on the surface of RPUF, providing efficient flame retardancy while preserving its excellent properties.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2025
·
IF 21.1
Su Li,Jinkai Qiu,Zijun Bian,Bin Shao,Zhicheng Liu,Cheng Lian,Honglai Liu,Jun Hu
The dry reforming of carbonate with methane (CaDRM) can be one of the breakthrough technologies to address the challenge of mitigating inevitable CO 2 emissions into value-added chemicals but remains great challenges for efficient catalysts design. In this study, we break the trade-off between the catalytic activity and the carbon deposit by tailoring the d-band center of Ni through Fe doping, which matches the energy level of CH 4 * dehydrogenation but is far away from that of the over cleavage of CH* . In this light, the porous spherical Fe x Ni/Al 2 O 3 catalysts with Ni 3 Fe alloy nanoaggregates are obtained through a one-step spray drying method. The optimized Fe 0.6 Ni/Al 2 O 3 catalyst shows an excellent catalytic activity with a superior CO selectivity of 91.75 % at a complete CaCO 3 conversion at 700°C, and successfully prevents the carbon deposit to maintain its excellent stability. Moreover, the extremely low activation energy of 45.2 kJ/mol and the good porosity of Fe x Ni/Al 2 O 3 ensure its fast dynamics. Therefore, this tailoring d-band center approach through the formation of alloy catalysts supplied a novel strategy for effectively cracking hydrogen species while avoiding over cleavage of CH x * in the thermal catalysis, which promoted the CaDRM technology to be a promising solution for carbon neutrality in industrial sectors in near future.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Jinjuan Gao,Wen Yang,Runcheng Liu,Jingwen Feng,Yaru Li,Mingshun Jiang,Shouzhen Jiang
The optical fiber sensor, which exploits surface plasmon resonance (SPR), finds extensive application in biological detection owing to its miniaturized and real-time measurement capabilities. Nevertheless, SPR sensors alone exhibit limited sensitivity when detecting small biological molecules. This paper presents a novel gold nanoparticle (AuNPs)/two-dimensional metal–organic framework (2D MOF Cu-TCPP)/Au/D-shaped fiber SPR sensor for dopamine detection. The composite structure of AuNPs/2D MOF/Au was designed to facilitate the coupling of SPR and local surface plasmon resonance (LSPR), resulting in a substantial enhancement of the intensity of the surface electric field. A 104.61 % increase in sensitivity and a 73.87 % increase in figure of merit (FOM) were achieved by optimizing the optimal deposition concentration of AuNPs/2D MOF . The finite element method was utilized in COMSOL software to demonstrate that the coupling of SPR and LSPR can significantly enhance the sensitivity value (10,000 nm/RIU). Additionally, the sensitization mechanism of the sensor is elucidated by the energy band theory. Moreover, probe DNA was utilized as a linker to capture dopamine molecules, achieving a low limit of detection (LOD) of 1.07 ± 0.07*10 −14 M. These results demonstrated that the proposed sensor enables accurate and highly sensitive detection of dopamine molecules.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Functional Foods
·
2024
·
IF 3.8
Xi-you Li,Xiao-yuan Gu,Bai-ling Zhou,Bun Tsoi,Wei-xi Li
Eye deformity, a noteworthy embryopathy, is intricately linked with maternal diabetes, frequently resulting in embryonic malformation or even death. In this investigation, a hyperglycemic chick embryo model was established to delve into the protective potential of tamarind shell extract (TSE) on eye development. Chick embryos were administered with TSE (at dosages of 1, 2, and 4 µg/egg) through air sac injection on embryo development day 0 (EDD0) and later exposed to D-glucose (0.4 mmol/egg) on EDD1. To validate our findings, we replicated hyperglycemic environment using D-glucose in ARPE-19 cell model. Our research unveiled that TSE proficiently counters O-GlcNAcylation of proteins in the presence of D-glucose, thereby reinstating levels of key proteins involved in eye development, including Pax6, Daam1, mTOR, and Cdc42. Furthermore, TSE was pinpointed to curtail the D-glucose concentration within the embryo eye, considerably decreasing the accumulation of reactive oxygen species and malondialdehyde accumulation in both the ARPE-19 cells and chick embryos. Beyond its fundamental role in boosting the cellular antioxidative activity, the improved expression of apoptosis-related proteins like Caspase-3, BAX, BCL-2 and other like PI3K and AKT were observed. This suggests a probable activation of the PI3K-AKT-mTOR pathway on ARPE-19 cells by TSE, thereby downregulating apoptotic proteins in ARPE-19 cells during oxidative stress. TSE may become a potent natural countermeasure against D-glucose-induced eye malformation.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Chuntao Yang,Kaiyong Feng,Jiangchang Chen,Ze Liu,Yingjian Yu
The commercial applications of aqueous rechargeable zinc-ion batteries (ZIBs) remain limited mainly owing to the low capacity storage efficiency and structural deformation of cathode materials, coupled with anode dendrite formation and side reactions that compromise battery performance. Herein, the electronically conductive metal-organic framework (EC-MOF) DDA-Cu was developed and used as the cathode for the first time in ZIBs. The electrode material showed an excellent initial discharge capacity of 249.6 mAh g −1 at 0.2 A g −1 . Notably, it also reached a effective capacity of 120 mAh g −1 after 175 cycles at an increased current density of 1 A g −1 . When used as an interface protective coating for zinc anodes, the uniform pore channels of DDA-Cu facilitated homogeneous zinc-ion deposition, which effectively suppressed dendrite growth and side reactions, typically a hydrogen evolution reaction (HER). Compared with bare zinc anodes, the Zn@DDA-Cu anode significantly extended battery lifespan, demonstrating stable cycling for over 3500 h at 0.5 mA cm −2 . Notably, the full battery with a Zn@DDA-Cu anode and a DDA-Cu cathode exhibited stable cycling for 100 cycles at 1 A g −1 , retaining a capacity of 185.5 mAh g −1 . This study provides an innovative strategy for the development of promising EC-MOFs for practical ZIB application.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER BULLETIN
·
2025
·
IF 4
Shah Nouman Ali,Shakir Namra,Gul Rizwan M.,Xu Jia-Zhuang,Li Zhong-Ming
Ultra-high molecular weight polyethylene (UHMWPE) is a versatile polymer with various industrial applications, particularly in orthopedic implants and structural materials. However, its susceptibility to oxidation limits its utility in demanding environments. This study investigates the potential of d -sorbitol (DS), a natural polyol, in enhancing the oxidation stability and crosslink density of UHMWPE when stabilized with tea polyphenols. Tea polyphenols, such as epigallocatechin gallate (EGCG), have been previously evaluated as a promising candidate to stabilize UHMWPE against oxidation without affecting its crosslink density. However, the higher content of EGCG has adverse effect on its mechanical properties. It is hypothesized that addition of DS to EGCG can improve the oxidation and crosslink density of UHMWPE blends. For this purpose, EGCG/DS was blended with UHMWPE at low antioxidant concentrations (≤ 1 wt%), and its comprehensive performance was evaluated. Results demonstrate that the incorporation of d -sorbitol effectively retards oxidation-induced degradation in tea polyphenol-stabilized UHMWPE. The presence of d -sorbitol enhances the crosslink density within the polymer matrix, thereby improving its resistance to oxidative stress. Furthermore, the study elucidates the underlying mechanisms through which DS interacts with EGCG and UHMWPE, elucidating the formation of stable complexes that mitigate oxidative damage. The in vitro biocompatibility of the blends was also very promising for use in artificial joints.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Xinzhi Wang,Jing Jiang,Jiayi Zhang,Qiyao Zeng,Aike Liu,Lunhong Ai
Defect engineering is considered one of the most powerful strategies for regulating the catalytic activity of electrocatalysts. A deep understanding of the defect-involved mechanism in electrocatalytic process is of great importance but remains a challenging task. In this study, an anionic Se-vacancy (V Se ) was introduced into iron diselenide (FeSe 2 ) nanoarrays, enabling the catalyst to exhibit improved electrocatalytic performance for sulfion oxidation reaction (SOR). The Se vacancy incorporated can modulate surface electronic structure and optimize the proximity of the d-p band center, strengthening the interaction between FeSe 2 -V Se and S atom. This endows the FeSe 2 /IF-V Se catalyst with the excellent electrocatalytic activity for SOR. As an alternative reaction to oxygen evolution reaction (OER), the low-potential SOR enables an ultralow electricity consumption in SOR-hydrid seawater electrolysis, avoiding detrimental chlorine electrochemistry. A proof-of-concept self-powered system based on FeSe 2 -V Se electrodes was constructed by integrating Zn-nitrite battery and SOR-hybrid seawater electrolyzer to produce high-value hydrogen, sulfur and ammonia. This work offers a fascinating strategy for the construction of an advanced energy system to produce hydrogen while utilizing seawater and wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Yuan Qin,Zihao Ou,Chaozhong Guo,Yao Liu,Rong Jin,Chuanlan Xu,Haifeng Chen,Yujun Si,Honglin Li
Regulating the electronic structure by phosphor-doping is a preferred strategy to boost the performance of carbon-based catalysts for oxygen reduction reaction (ORR). Here, a porous Fe, P, N-codoped carbon catalyst (PCF-FeTz-900) is designed by a phytic acid-assisted thermal etching strategy, in which P atoms are first doped into the carbon matrix to form a stable P C bond, and then FeN 4 sites are produced from Fe-2,4,6-Tris(2-pyridyl)-s-triazine complex (Fe-TPTz). Theoretical calculations suggest that the electrons are transferred from the doped P atom to the neighboring FeN 4 sites, which facilitates the ORR at the Fe sites by reducing the energy barrier and the adsorption energy of intermediates. Additionally, the P-doped FeN 4 (FeN 4 P) structure manifests a lower free energy difference than that of FeN 4 and the d -band center of Fe is also lowered, which further ensures its higher ORR catalytic ability. As a result, the PCF-FeTz-900 catalyst exhibits superior ORR activity and stability in alkaline electrolyte, and the assembled primary zinc-air battery shows greater performances compared to the commercial Pt/C catalyst. This work can provide an effective pathway for modulating the performance of doped-carbon materials in energy conversion devices.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2025
·
IF 26.8
Rubing Bai,Peihao Huo,Nanlong Zheng,Yujia Li,Wenchao Yan,Peiyu Fang,Xiaoyu Zhou,Zuqiang Bian,Zhiwei Liu
Light-emitting electrochemical cells (LECs) have good prospects in the solid-state lighting field due to their simple single-layer structure and low manufacturing cost. However, the lack of high-efficiency blue LECs limits their development and further application. To solve this problem, many luminescent materials with various mechanisms such as fluorescence, phosphorescence, and thermally-activated delayed fluorescence are studied as emitters in LECs. Besides these materials, herein lanthanide europium(II) (Eu(II)) complex with d-f transition is demonstrated as a new type of emitter for LECs. In detail, a blue emitting Eu(II) complex bis[hydrotris(3-tert-butylpyrazolyl)borate]europium(II) is dispersed into 9-(3-(triphenylsilyl)phenyl)-9H-3,9′-bicarbazole host and tetrahexylammonium tetrafluoroborate electrolyte to make a blend film, which attains a high photoluminescence quantum yield of ≈100%. The LEC using the blend film as an active layer achieves a blue emission with Commission Internationale de L'Eclairage coordinates of (0.12, 0.18) and a record-breaking external quantum efficiency of 19.8%, corresponding to an exciton utilization efficiency of ≈100%. This work reveals that Eu(II) complex with d-f transition is a promising emitter toward high-performance blue LECs, which can inspire further research on Eu(II) complex based LECs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DYES AND PIGMENTS
·
2025
·
IF 4.2
Yizhi Shao,Dandan Liu,Qinwei Xia,Zhendong Song,Wei Chen,Ke Sun,Changjiang Zhou,Yangyang Xu,Tao Gong
The elongation of π-conjugation could efficiently enhance the photophysical performances or photochemical reactivties of organic molecules, which adapts to the requests of both designing fluorescent materials and organic photoinitiators (PIs). However, there is no work attempted to design organic PIs with large molar extinction coefficients and long π-conjugation lengths by using hybridized local and charge-transfer (HLCT) method, which is meaningful to obtain high-performance PIs with significant fluorescence/photoluminence properties. What's more, how to overcome the obstacles derived from the unbalance between high triplet concentrations and photoinitiation abilities of organic PIs seems to be crucial, while PI's design from a view of excited state were rarely reported for rational regulation strategy up to now, we thus introduced four chromophores with D-A structures designed by HLCT method, whose triplet states were confirmed by Ultra-fast absorption spectroscopy, into photopolymerzation, where LEDs in various wavelengths were utilized as the light sources in the present work. Noticeably, some of these dyes could furnish high monomer conversions and rapid photopolymerization rates, not only under the irradiation of 405 nm LED, but also long-wavelength light source at 660 nm, which have been confirmed by the photopolymerization kinetics and 3D printing technique. Here, the spin-orbit coupling (SOC) coefficients were carried out as well, to examine their effects on photoinitiation abilities of investigated molecules, which can be regarded as the first attempt to achieving light-harvesting PIs from excited state design. Finally, the corresponding photochemical mechanisms were investigated by steady state photolysis, fluorescence quenching experiments, particularly by frontier orbit energy and distributions to examine the interactions between these dyes with co-initiator/additives in details.
✓ 已验证
产品关联
DOI
高影响因子
Frontiers in Microbiology
·
2024
·
IF 4
Yuhan Zheng,Feiyang Sun,Siyi Liu,Gang Wang,Huan Chen,Yongxin Guo,Xiufeng Wang,Maia Lia Escobar Bonora,Sitong Zhang,Yanli Li,Guang Chen
Background: The production of D-lactic acid (D-LA) from non-detoxified corn stover hydrolysate is hindered by substrate-mediated inhibition and low cell utilization times. In this study, we developed a novel temperature-sensitive hydrogel, F127-IEA, for efficient D-LA production using a cell-recycle batch fermentation process.Results: F127-IEA exhibited a porous structure with an average pore size of approximately 1 μm, facilitating the formation of stable Lactobacillus bulgaricus clusters within the gel matrix. It also maintains excellent mechanical properties. It also maintains excellent mechanical properties. F127-IEA immobilized Lactobacillus bulgaricus T15 (F127-IEA-T15) can be used in cell-recycle fermentation for over 150 days from glucose and 50 days from corn stover hydrolysate, achieving high production rates of D-LA from glucose (2.71 ± 0.85 g/L h) and corn stover hydrolysate (1.29 ± 0.39 g/L h). F127-IEA-T15 enhanced D-LA production by adsorbing and blocking toxic substances present in corn stover hydrolysate that are detrimental to cellular activity.Conclusions: The newly developed hydrogels in this study provide a robust platform for large-scale extraction of D-LA from non-detoxified corn stover.
✓ 已验证
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）