CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Song Ge,Jun Song,Jichao Zhang,Xiu-Li Yang,Ming-Hua Xie
Solar-driven interfacial evaporation offers a viable pathway for alleviating global water shortages. However, a significant challenge arises when the source water contains organic contaminants, as the evaporation process can lead to the enrichment and exacerbation of pollution in the remaining water. Herein, we constructed a flexible bifunctional nanofibrous membrane evaporator featuring a gems-on-string structure, designed to concurrently realize clean water production and source water purification. This was achieved through the uniform decoration of polypyrrole (PPy) nanoparticles onto silica nanofibers, followed by the tactful immobilization of zeolitic imidazolate framework (ZIF-67) polyhedrons on the fibers via a facile hot-pressing approach. The micro-nano hierarchical structure of the gems-on-string fibers enables multiple reflections between adjacent gems, significantly enhancing full-spectrum light absorption (96.3 %) and photothermal conversion. Moreover, the superhydrophilic and hierarchically interconnected channels within the membrane facilitate water transport and evaporation enthalpy diminution. Furthermore, the synergistic effects of localized heat from PPy, and photocatalysis and cobalt sites from ZIF-67 significantly promote the activation of peroxymonosulfate. As a result, the bifunctional evaporator achieves a rapid evaporation rate (2.29 kg m -2 h −1 ) with a remarkable solar-water conversion efficiency (93.2 %) under one sun, outperforming most state-of-art evaporators, while maintaining superior oxytetracycline removal (92.5 %). Significantly, the evaporator delivers a daily freshwater output (5.3 kg m −2 ) when treating complex wastewater/seawater. This study not only presents an efficient strategy for fabricating flexible high-performance photothermal-catalytic membranes, but also provides a sustainable platform for freshwater production and sewage purification.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Yuanhong Shang,Chunlin Liu,Jinfeng Tian,Ruifeng Zhou,Qin Hu,Xiaodan Sun
Flexible and stretchable hydrogels are important components of flexible electronics; however, they are typically easily detached upon repeated high-strain stretching because of their smooth surfaces and cannot be used at subfreezing temperatures because of ice formation. To address these shortcomings, we prepared a low-temperature-resistant and flexible double-network hydrogel with a bionic octopus-tentacle-like structure composed of polyvinyl alcohol and sodium alginate. We also verified its suitability for developing high-performance, flexible, stretchable, and environmentally durable supercapacitors and nanogenerator sensors. The influence of melting temperature on the hydrogel’s surface morphology decreased the interfacial resistance. The fabricated supercapacitor demonstrated exceptional performance, with 1326.5 mF cm −2 (areal capacitance) at 1 mA cm −2 , a maximum energy and power densities of 172.3 μWh cm −2 , and 708.6 mW cm −2 , respectively, outperforming most integrated supercapacitors previously reported. The corresponding nanogenerator sensor demonstrated outstanding suitability for energy harvesting and low-temperature sensing, with potential applications in underwater information transmission using international Morse code. The results of this study paves the way for the fabrication of intelligent wearable electronics and solves the problems associated with the fabrication of flexible and low-temperature-resistant hydrogels.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2025
·
IF 9.5
Xiaoyang Zhang,Xuefei Zhang,Hai-Tao Ren,Ting-Ting Li,Ching-Wen Lou
Flexible hydrovoltaic generators, which sustainably convert abundant water resources in nature into electrical energy, have attracted significant attention in the field of wearable electronics. However, owing to the low surface charge density and poor charge transfer capability of the current active materials in hydrovoltaic generators, challenges remain in realizing high power output, large-scale integration, and wearable practical applications. In this work, a novel approach is proposed using a self-assembly and in situ growth method to fabricate a hydrovoltaic device based on a core-sheath structure composed of negatively charged Ti3C2TX MXene (MXene) as the matrix material and positively charged conductive polypyrrole (PPy). This design simultaneously achieves high conductivity and surface charge density and has been successfully applied to wearable hydroelectric energy conversion. The resulting device exhibits a peak current of 4.07 mA and a maximum power output of 215 μW, outperforming most existing hydrovoltaic generators. The cotton fabric-based hydrovoltaic generator with a continuous core-sheath structure developed in this study not only enhances electricity generation under water diffusion but also demonstrates sensitive sensing signals in response to solution fluctuations (1283.08 μA M−1), creating new possibilities for flexible self-powered wearable hydrovoltaic electronic devices.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2025
·
IF 6.1
Gongwei Tian,Jianhui Chen,Dan Yang,Cuiyuan Liang,Qinyi Zhao,Yan Liu,Weihong Lu,Dianpeng Qi
Wearable sensing devices provide a promising approach for non-invasive health detection. However, most flexible devices are inevitably susceptible to wear and mechanical degradation in practical applications due to stretching, cutting, or overuse, resulting in device malfunction. Therefore, it is necessary to develop sensing devices with self-healing and stretchable capabilities. Here, an in-situ self-healing and stretchable sweat glucose sensor is fabricated by depositing Au on the synthetic self-healable PDMS 0.9 -IPDI elastomer and modifying polypyrrole/glucose oxidase on the sensing position, respectively. This sensor can recover electromechanical properties through dynamic hydrogen bonds after fracture and self-healing 4 h at room temperature, and maintain stable sensing properties under 50% strain, which satisfies the strain required by human skin in daily activities. In addition, the modified polypyrrole film on the Au electrode increases the electrochemically active area of the working electrode by 3-4 times and the sensor exhibits a sensitivity of 62.60 μA·mM -1 ·cm -2 in the linear range of 0-1 mM, with the detection limit is as low as 12.58 μM. Furthermore, the sensor can accurately and reliably detect the glucose content in human sweat samples, providing a novel approach for the practical application of glucose sensors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Shengdong Liu,Yilong Zheng,Qing Xiang,Zhufeng Yuan,Huanhuan Zhang,Yonggang Min
Periosteal repair is a sophisticated biological process involving the regeneration of bone tissue, blood vessels, and nerve complexes. However, current biomimetic periosteal materials are mainly insulating and only focus on osteogenesis and vascular regulation, often neglecting neural network reconstruction. In this study, we developed an electroactive sulfonated polyaniline/polypyrrole (SP/PPy) co-modified polycaprolactone (PCL) composite as a biomimetic periosteal membrane. Utilizing in-situ oxidative polymerization, SP was functionalized as a precursor layer, effectively addressing the issue of non-uniform PPy deposition on the hydrophobic polyester substrate. This modification enhanced the mechanical strength by 20.41 % and endowed the periosteal membrane a conductivity up to 220 S m −1 , enabling electrostimulation-mediated bidirectional differentiation for osteogenesis and neurogenesis. Experimental results demonstrated key advantages of this electroactive periosteum: 1. Superior Antibacterial Properties: The material achieved an inhibition rate of 98.56 % against Staphylococcus aureus . 2. Enhanced Biological Activity: The viability of rat bone marrow stromal cells (rBMSCs) reached 108.2 % of that of the blank sample. 3. Significant Electrostimulation Responsiveness: Under electrical stimulation, alkaline phosphatase (ALP) activity increased by 150.5 %, and the average axonal growth of PC-12 cells increased by 6.473 μm. This study provides a novel strategy for constructing electroactive multilayer biomimetic periosteal membranes, contributing to neuro-bone composite regeneration.
✓ 已验证
产品关联
DOI
高影响因子
Biosensors-Basel
·
2025
·Vol. 15
·期 5
·267
·
IF 5.6
Fei Wang,Xiao Peng,Ziqian Xiao,Ying Ge,Bilin Tao,Zhaoyong Shou,Yifei Feng,Jing Yuan,Liang Xiao
A composite (N-rGO@ppy) of N-doped reduced graphene oxide (N-rGO) coated with polypyrrole (ppy) particles was successfully synthesized. The incorporation of N-rGO significantly mitigates the aggregation of ppy synthesized in situ, and the doped N atoms improve the conductivity of graphene oxide (GO), thereby enhancing N-rGO@ppy’s redox properties. Firstly, a glassy carbon electrode (GCE) modified with N-rGO@ppy (N-rGO@ppy/GCE) was used in combination with a bismuth film and square-wave anodic stripping voltammetry (SWASV) for the simultaneous trace analysis of Pb2+and Cd2+. N-rGO@ppy/GCE exhibited distinct stripping peaks for Pb2+and Cd2+, with a linear range of 1 to 500 μg L−1. The limits of detection (LODs) were found to be 0.080 μg L−1for Pb2+and 0.029 μg L−1for Cd2+, both of which are significantly below the standards set by the World Health Organization (WHO). Subsequently, the same electrochemical sensing strategy was adapted to a more portable screen-printed electrode (SPE) to accommodate the demand for in situ detection. The performance of N-rGO@ppy/SPE for analyzing Pb2+and Cd2+in actual samples, such as drinking water, milk, and honey, showed results consistent with those obtained from conventional graphite furnace atomic absorption spectrometry (GFAAS).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2025
·
IF 4.6
Yiheng Yuan,Xishun Peng,Cunwei Wang,Haili Zhang,Caizhen Zu,Zhangyu Zhou,Zhongchen Bai
The threats of antibiotic residues to human health and the environment have become more and more severe due to the overuse of antibiotics in agriculture. Here, multi-walled carbon nanotubes (MWCNTs) were used to prepare MWCNTs@ZnO/Ag substrate by a simple two-step electrochemical deposition process to detect the enrofloxacin (ENR) residues in pork. The coral-like MWCNTs with a large surface area could promote ENR adsorption and provide more sites for growing the ZnO/Ag nanostructures. Moreover, ZnO/Ag nanostructures could not only facilitate the electron transfer to increase Raman intensity but also improve the stability of MWCNTs@ZnO/Ag substrate. Thus, the MWCNTs@ZnO/Ag substrate could easily recognize ENR molecules at a low concentration of 5 × 10 −10 M due to the stronger charge transfer effect between the substrates and analytes. In addition, the limit of detection of ENR residues in pork samples by using MWCNTs@ZnO/Ag substrate was up to 5.87 nM. The SERS sensor of the MWCNTs@ZnO/Ag substrate has a high sensitivity and long-term stability for the detection of antibiotic residues in food, which could be applied in fields of food safety.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Xiaoyang Zhang,Xuefei Zhang,Hai-Tao Ren,Ting-Ting Li,Ching-Wen Lou
Harvesting energy from naturally abundant water resources is expected to alleviate the need for the current energy shortage. However, existing studies rarely consider the effect of capacitors on the output of hydropower generation. Here, inspired by capacitors, we prepared a flexible and efficient hydrovoltaic generator by loading polypyrrole (PPy) and Ti 3 C 2 Tx MXene onto cotton fabrics by a simple green one-step synthesis method with self-assembly. Specifically, the ionic imbalance at the interface can be exacerbated by the use of expanded capacitance, while synergistically the two materials PPy/MXene will adsorb different ions, which promotes efficient adsorption of ions and ensures energy conversion. This generator can produce an open-circuit voltage (V OC ) of 0.35 V and a short-circuit current (I SC ) of ~260 μA in just 5 mL of a 3.5 wt% NaCl solution, and the optimized device can achieve an output power of 35.76 μW. Furthermore, this capacitance-enhanced fabric-based hydrovolt generator can directly power electronic devices and demonstrates its potential future applications in practical applications such as respiratory monitoring and touch sensing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TALANTA
·
2025
·
IF 6.1
Ping Gao,Yan Liu,Jing Sun,Qi Chang,Leijiao Li,Zhongmin Su
Continuous and quantitative measurement of toxin biomarkers in biological fluids constitutes a significant advancement in the proactive management of chronic kidney diseases (CKD). Although sweat analysis presents a promising non-invasive strategy, conventional detection methods suffer from inherent limitations, including low sensitivity, poor specificity, high cost, and inadequate long-term durability. Herein, we constructed a novel molecularly imprinted portable biosensor that can simultaneously detect three critical biomarkers (urea, creatinine, and uric acid) for CKD in human sweat. The sensor was fabricated on flexible polyethylene terephthalate (PET) film using screen-printing technology to form a five-electrode array consisting of one counter electrode, one reference electrode and three working electrodes. The ternary composite electrodes (NiCoMOF/MWCNTs/NCDs) were designed as sensing substrate, the porous structure derived from metal-organic frameworks provides abundant active sites for analyte sensing and in synergy with the conductivity of MWCNTs and NCDs, endows the ternary composite electrode with a high electrochemically active surface area (A) of 0.062 cm 2 , a rapid electron transfer rate ( k 0 ) of 6.685 × 10 −3 cm s −1 , and a low electron transfer resistance of 52.79 Ω, significantly enhancing its electrochemical properties (Bare carbon, A: 0.0161 cm 2 , k 0 : 0.613 × 10 −3 cm s −1 ). Molecular imprinting technology generates highly specific recognition cavities with enhanced rebinding efficiency by removing template molecules from each working electrode. The portable sensing platform exhibits sensitivities of 6.2 μA mM −1 cm −2 , 134 nA μM −1 cm −2 , and 1870 nA μM −1 cm −2 for the detection of urea, creatinine, and uric acid, respectively, with detection limits of 0.048 mM, 0.032 μM, and 0.024 μM. The linear ranges encompass the physiological concentrations of these analytes in sweat, with corresponding correlation coefficients (R 2 ) of 0.9959, 0.9952, and 0.9981. The non-enzymatic mechanism ensures that the signal retention rate remains above 95.8 % after 60 days of storage. The results from various scenario tests demonstrated that the sensing system successfully achieved synchronous dynamic monitoring of three biomarkers in sweat samples. Hence, this work shows high development prospects for a continuous, convenient, non-invasive sensing platform for point-of-care diagnosis and personalized management of chronic kidney diseases.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2025
·
IF 2.5
Kunpeng Song,Wenwen Yang,Jinfeng Wei,Fang Liao
The slow kinetic efficiency of the cathode oxygen reduction reaction (ORR) and high catalyst cost of fuel cells has seriously hindered the development of clean energy technologies. Herein, a novel Fe-Cu dual atomic sites embedded in hyper crosslinked N-doped carbon skeleton (FeCu@NC) catalyst was fabricated via mimicking both the constituents of active centers and Fe-N4 microstructure of Cytochrome c oxidase (CcO). The FeCu@NC exhibits a superior ORR activity, with about 40 mV more positive halfwave potential (E1/2) than that of commercial Pt/C catalyst in base. Importantly, the FeCu@NC displays an excellent durability (keep 92.7% activity after 20000s), which is superior to commercial Pt/C. Experimental data combined with theoretical calculation show the remarkable performance of this catalyst is attributed to the design of Cu、Fe bifunctional catalytic synergy reference CcO, the unique synergistic effect between Cu and Fe coordination units in which metal Cu serves as another electron donor to increase the electron density of Fe-N4 centers and thus facilitate O2 reduction.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER ENGINEERING AND SCIENCE
·
2025
·
IF 3.2
Xinyu Zhu,Wei Yuan,Xiangtong Wen,Jinze Li,Jing Sui,Tao Zhuang,Chong Sun
Flexible and lightweight polypyrrole nanotubes/ethylene propylene diene monomer (PPyNT/EPDM) rubber foams with excellent electromagnetic waves (EMW) absorption performance in the X-band were prepared via a simple chemical foaming method. By adjusting the content of PPyNT, the cellular structure, density, and EMW absorption properties of the PPyNT/EPDM foams can be precisely tailored. The synergistic effect of the cellular structure and an optimal PPyNT content (15 phr) endows the PPyNT/EPDM foam with an excellent impedance matching and a high attenuation capacity, in turn resulting in excellent EMW absorption performance in the X-band, demonstrated by the minimum reflection loss (RL min ) of −27.01 dB at a thickness of 2.3 mm and the maximum effective absorption bandwidth (EAB) of 3.4 GHz at a thickness of 2.6 mm. Furthermore, this foam composite exhibits excellent lightweight characteristics with a density of only 0.795 g/cm 3 . Hence, this research presents a promising approach for the commercial development of flexible, lightweight, cost-effective, and highly efficient EMW absorption materials. Highlights Lightweight PPyNT/EPDM foam for X-band EMW absorption. Tailored porous structure and absorption performance by PPyNT content. Foam with 15 phr PPyNT achieves RL min of −27.01 dB and EAB of 3.4 GHz. Synergy of impedance matching, conduction loss, and multiple reflection.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Jingwen Chu,Dinghe Yan,Zhiyuan Qiao,Feng Xu,Yang Ye,Jialin Wei,Dawei Ji,Haolong Xue,Shiqiang Song,Changfa Xiao,Jingjing Yan,Chun Wang
Using a porous ultrafiltration membrane made of poly(terephthalamide) (PPTA) as the base membrane, and using poly (allylamine hydrochloride) (PAH) and poly (styrene sulfonate) (PSS) respectively as the polycation and polyanion, a PPTA/PEMs multilayer membrane was prepared via the layer-by-layer (LBL) assembly method. Subsequently, polypyrrole (PPy) as a conductive separation layer was in situ polymerized on the surface of the PPTA/PEMs multilayer membrane using pyrrole (Py) and ferric chloride (FeCl 3 ) as the reactant and activating initiator, respectively, through chemical vapor deposition (CVD). By directing the control of the number of PEMs charged layers and their charge properties, a PPTA/PEMs/PPy composite nanofiltration membrane with stable and controllable interlayer structure was prepared. Further, the surface microstructure, chemical composition, hydrophilicity, and surface charge of the PPTA base membrane and the PPTA/PEMs/PPy composite nanofiltration membrane were characterized using SEM, AFM, FTIR, water contact angle, and zeta potential measurements. The results showed that when the number of polyelectrolyte layers was three (PAH/PSS) 3 , the PPTA/PEMs/PPy composite nanofiltration membrane exhibited high desalination performance and good permeability under a transmembrane pressure of 0.8 MPa. Subsequently, its structural performance stability was investigated under high-temperature (20°C and 80°C), acidic (pH=2), and alkaline (pH=13) conditions. After 10 hours of testing, the permeability of the PPTA/PEMs/PPy composite nanofiltration membrane for a 5 g/L Na 2 SO 4 solution decreased slightly, but the rejection rate remained almost stable. Compared to the PPTA/PPy composite nanofiltration membrane from previous studies, the PPTA/PEMs/PPy composite nanofiltration membrane obtained in this study showed improved permeability and rejection rate in high-concentration saline wastewater, with good thermal stability and chemical corrosion resistance. This provides guidance for the application of nanofiltration membranes in the treatment of saline wastewater under harsh conditions.
✓ 已验证
产品关联
DOI
高影响因子