Science China-Chemistry
·
2025
·
IF 9.7
Yang Lu,Miao Zhouyu,Dong Yanjuan,Yu Hou-Yong
Bionic electronic skin (e-skin) with intrinsic compressibility and stretchability holds significant potential in robotic haptics, enabling robots to perceive and interact with objects of various shapes effectively. However, creating a biomimetic e-skin with precise dual-signal decoupling remains a challenge. To address this, we present a bifunctional sensor inspired by the spider-hunting mechanism, which captures signals during predation. This sensor is constructed using pressure-stretched multilayer electrospinning of nanofibers-polyvinyl alcohol (CNC-PVA), followed by gas-phase polypyrrole (PPy) polymerization. The innovative superimposed design of the homologous multilayer sensing module, combined with a conductive nanofiber network structure, enables remarkable multi-signal self-decoupling capabilities. Key features of this sensor include high-pressure sensitivity (14.8 kPa −1 for 0–21 kPa) and an impressively fast response time of 57 ms. As a pressure sensor, it demonstrates repeatability over 5 cycles, while as a stretching sensor, it achieves high sensitivity (gauge factor, GF=1.22) and remains stable over 1000 cycles. Furthermore, this self-decoupled sensing system can independently detect dual signals (shape and weight of objects), thereby empowering robots to recognize and handle various objects more effectively. This multifunctional, low-cost sensor offers an advanced solution to overcome problems in functional e-skin for enhanced robotic object manipulation and recognition capabilities.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2025
·
IF 7.9
Mangmang Yu,Huifang Zhu,Jiang Zhong,Fei Gao,Yongluo Qiao,Liang Shen
Flexible supercapacitors face limitations in capacitance and energy density due to structural constraints and sluggish ion diffusion. Herein, a cost-effective two-step confined synthesis is proposed to prepare molybdenum disulfide (MoS 2 )/polypyrrole (PPy)/manganese dioxide (MnO 2 ) ternary composites with high energy storage performance. The plane structure of MoS 2 not only ameliorates bipolaron concentration of PPy, but also preserves its conjugated structure during the combination with MnO 2 , thereby enhancing electrochemical stability. Nanoflower-structured MnO 2 can effectively improve ions adsorption/transport, as well as reinforce electrochemical reactivity. The measured specific surface areas increase from 33.25 m 2 /g for PPy to 112.47 m 2 /g for MoS 2 /PPy/MnO 2 . Consequently, synergistic effect of MoS 2 /PPy/MnO 2 components delivers a higher specific capacitance of 721 F g −1 at a current density of 1 A g −1 , while the specific capacitance of PPy, MoS 2 /PPy, and PPy/MnO 2 is only 179 F g −1 , 480 F g −1 , 270 F g −1 , respectively. The ternary composites supercapacitor exhibits a high mass power density of 3235.63 W/kg at an energy density of 40 Wh/kg. The cycling stability of MoS 2 /PPy/MnO2 material is also effectively improved compared to PPy/MnO 2 . After 5000 cycles, the capacitance of MoS 2 /PPy/MnO 2 is still 89.6 %, whereas that of PPy/MnO 2 is only 67.8 %. This research illuminates the fabrication of high-performance conducting polymer electrodes for wearable energy-storage devices.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Boyu Cui,Jiayan Ding,Hao Xie,Tong Ji,Chunmao Yang,Yutong Cui,Xin Shu,Wei Dai,Weihong Wang,Shuang Li
The excessive reliance on traditional petroleum resources poses significant environmental challenges. Fortunately, agricultural straw, which is often regarded as a waste product, has considerable potential for various applications. However, these materials are frequently crushed into particles, thereby neglecting their inherent structural advantages. In this study, wheat straw is utilized in its complete form and converted to a strong and flexible fiber bundle. We employ a top-down approach on whole wheat straw that involves an alkali pretreatment combined with delignification and freeze-drying to obtain highly directional cellulose aggregates. Subsequent twist densification results in the formation of a strong, flexible wheat straw-derived fiber bundle (WFB). WFB exhibits an excellent strength of 203.9 MPa, representing a 3.4 improvement rate in relation to that of the initial straw. This indicates that agricultural waste can be transformed to a high-performance material, embodying the concept of “Waste to Wealth.” In addition, WFB can be further functionalized (e.g., via hydrophobic treatment, dyeing treatment, or incorporation with a conductive material) on the basis of the abundant hydroxyl groups present on its surface. This strategy provides insights into the innovative utilization of straw and promotes its application in wearable textile and smart fiber development.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Suozhu Wu,Yiqin Zhang,Xuedong Jia,Jie Mao,Hao Wu,Shurong Wang,Hongyuan Guo
Chloramphenicol (CAP) is an antibiotic that could cause serious toxic effects on the human body. Therefore, it is crucial to measure CAP levels in food products. Here we developed an electrochemical sensor based on the molecularly imprinted polymer/polyaniline/gold nanoparticles-reduced graphene oxide-chitosan (MIP/PAN/AuNPs-RGO-CS) modified electrode to determine CAP. The PAN/AuNPs-RGO-CS and MIP film provided the function of signal amplification element and specific recognition unit, respectively. CAP was detected by square-wave voltammetry using potassium ferricyanide (K 3 Fe(CN) 6 ) as a redox signaling probe. The reduction peak current of K 3 Fe(CN) 6 linearly decreased with the logarithmic CAP concentration in two distinct ranges of 1.0–8.0 nM and 10–200 nM with a low limit of detection of 63 pM. This sensor also exhibited short removal and adsorption time, good repeatability, high selectivity, excellent stability, and acceptable recoveries for milk and egg, which offered a promising avenue for ultrasensitively measuring trace antibiotics in actual samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of the Taiwan Institute of Chemical Engineers
·
2025
·
IF 6.3
Xiaodao Liang,Yaorong He,Chao Xiong,Hongbing Ji,Yan Yang
Background Oxygen activation is a critical step in oxidation reactions for energy conversion and fine chemical synthesis, with its efficiency directly determining catalytic performance and industrial applicability. The main challenges are the high activation energy barriers and low target product selectivity caused by the inherent inertness of molecular oxygen. To address these issues, this study draws on the advantages of biomimetic catalysis using metal porphyrins and synthesizes a series of porphyrin-based organic polymers (Metal-Por-POPs) to achieve efficient aerobic epoxidation of olefins. Method A series of metalloporphyrin-based organic polymers were synthesized and thoroughly characterized using techniques such as SEM, XRD, and XPS. The catalytic performance was systematically evaluated under various conditions, including catalyst types, oxidant amount, reaction time, and temperature. Significant finding Using Mn-Por-POP as a catalyst, isobutylene was converted to the corresponding epoxide within 1 h at room temperature with a selectivity of up to 96.4 %. The catalyst also demonstrated excellent recyclability and broad substrate adaptability, maintaining over 96 % epoxide selectivity after five consecutive reaction cycles. Mechanistic studies via EPR and HRMS revealed that Mn-Por-POP promoted the generation of acyl radicals from isobutyraldehyde under aerobic conditions. These radicals subsequently reacted with molecular oxygen to form acylperoxy radicals, which facilitate the highly selective epoxidation of alkenes.
✓ 已验证
产品关联
DOI
高影响因子
SOLAR ENERGY
·
2025
·
IF 6.6
Dongli Fan,Yun Yang,Mengyi Yan,Pengli Chen,Jie Li,Yuan Meng,Wenwen Wu,Meijuan Gu,Tao Qian,Yufeng Cao
The development of phase change materials (PCMs) with excellent solar-thermal conversion is of great importance yet remains challenging, due to the difficulties such as liquid leakage, inferior optical absorption, and intrinsic rigidity in conventional PCMs. Herein, a series of flexible PCMs combining with significantly enhanced solar-thermal conversion were fabricated through a multilayered assembly strategy. These flexible PCMs exhibited leakage-free behavior, controllable energy storage capacity ranging from 78.9 to 108.9 J/g, and long-term cycling stability over 500 thermal cycles. More importantly, the composites demonstrated a high solar-thermal conversion efficiency of 93.5 % along with excellent cycling durability over 200 cycles, due to the significantly enhanced optical absorption, and structural properties imparted by embedded multilayer PPy nanosheets. Furthermore, the obtained highly flexible composites conformed effectively to the complex profiles of human joints, enabling efficient thermal comfort regulation. This study provides a feasible approach to develop flexible PCMs for solar-thermal applications.
✓ 已验证
产品关联
DOI
高影响因子
COMBUSTION AND FLAME
·
2025
·
IF 6.2
Xinqi Zhang,Huajie Lyu,Peng Liu,Hong Wang,Zhandong Wang,Bingjie Chen
Utilization of biomass waste energy is a promising solution to reduce CO 2 emission. However, fuel-nitrogen in biomass waste may elevate toxic NPAH emission. Even for the smallest NPAH, indole, its formation chemistry has not been elucidated yet. In this study, we investigated indole formation through ring expansion of pyrrole, a surrogate to represent rich pyrrolic functional groups in biomass waste. The reaction of acetylene and pyrrole was enabled in a low-pressure flow reactor in the temperature range of 800–1200 K. Reaction products were in-situ sampled by molecular beam and analyzed by time-of-flight mass spectrometry using synchrotron vacuum ultraviolet radiation as photon ionization source. 36 chemical structures, including indole and 18 nitrogen-containing aromatics, were identified by photoionization efficiency curves and species ionization energies. Guided by species distribution, four reaction pathways, two for indole formation and two as competing reactions were proposed by quantum chemistry using high level of theory. Calculated product yields, rate constant comparison, and species mole fractions by kinetic modeling highlights the importance of indole formation. The findings provide new insights on NPAH formation from fuel-nitrogen, which may help develop emission control strategy for biomass waste utilization.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2025
·
IF 7.9
You Chen,Chunxiang Lu,Shuxia Yuan,Xiaodan Ren,Shijie Wu,Haozhi Duan,Ran Yuan
Lithium-sulfur batteries (LSBs) are considered a promising class of energy storage devices due to their high theoretical energy density and specific capacity. Key challenges to improving LSB performance include mitigating the shuttle effect of soluble polysulfides (LiPSs) and enhancing the conductivity of the sulfur cathode. In this study, we present a tubular material composed of porous nitrogen-doped carbon (PNC) and nitrogen-doped carbon nanotubes (NCNT) as a sulfur host (PNC/NCNT). The porous structure of PNC/NCNT provides abundant space for sulfur accommodation, while its disordered mesoporous structure and high electronic conductivity help alleviate the shuttle effect of LiPSs through nitrogen-induced defects and active sites. As a result, the PNC/NCNT/S cathode significantly enhances the poor electrical conductivity of sulfur cathodes, offering improved rate performance and robust cycling stability, with a capacity retention of 859.1 mAh g −1 after 500 cycles at 1 C and a minimal capacity fading of 0.031 % per cycle.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS A-PHYSICAL
·
2025
·
IF 4.9
Xinyu Wang,Wenxuan Guo,Xiaodong Jiao,Zhengxiang Jin,Ce Chuai,Junjun Pan,Hao Sun,Qinglin Sun,Siyuan Wang,Peng Xu
Traditional Chinese Medicine (TCM) pulse diagnosis provides a non-invasive approach to assess physiological conditions through multidimensional pulse information and surface thermal cues reflecting body cold–heat states. However, current sensing platforms struggle to achieve high sensitivity, and a wide linear range under the quasi-static pressure required for pulse assessment, making faithful replication of the tactile diagnostic process challenging. Here, we present a polypyrrole(PPy)/MXene ( T i 3 C 2 T x ) based triboelectric smart textile sensor (TSTS) that captures key tactile features of TCM pulse diagnosis and simultaneously detects radial artery temperature via a dual-stage signal amplification design. The TSTS forms a bioinspired multiscale conductive interface in which nanoparticles and nanosheets assemble on textiles to enhance mechanical responsiveness and thermal sensitivity, while a silicone micro-protrusion and spacer layer optimize stress transfer and structural stability. The sensor exhibits high linearity (0.999), sensitivity (0.07 V/kPa), a low detection limit (0.02 kPa), rapid response time ( < 40 ms), and high thermal resolution (0.1 ∘ C), and reliably senses pulses under quasi-static pressures of 0–100 mmHg. Integrated with a pressure graded sensing protocol and a multiscale fusion cross attention neural network (MSFCN), the system with the TSTS array enables accurate TCM pulse classification and temperature inference for intelligent health monitoring.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2025
·
IF 3.9
Wang Yanting,Song Shiyu,Liao Xilin,Zhou Pei wen,Li Runchuan,Xing Mengxing,Lin Jia-Horng,Li Liang,Liu Rangtong
The rapid development of science and technology has led to the aggravation and complexity of electromagnetic radiation pollution. Therefore, multifunctional electromagnetic interference shielding materials have become increasingly indispensable. Based on the advantages of textile materials, the modular coupling assembly strategy was utilized to achieve the structural regulation of the multifunctional PP conductive composite film and effectively endowed it with excellent EMI shielding performance. In this study, the adhesive property of polydopamine was utilized to enhance the chemical reactivity of PP films. The construction of porous conductive structures and core–shell conductive structures of PPy inside and outside PP fibers was achieved by controlling the polymerization rate of pyrrole in a low-temperature environment. The macroscopic encapsulation of the hydrophobic layer enhanced the bonding strength between the PP substrate and the conductive layer. The results show that different concentrations of pyrrole affected the microstructure and EMI shielding performance. When the concentration of pyrrole was 0.8 mol/L, the surface contact angle and surface resistance of the PP composite film were 138.42° and 73 Ω, respectively. In addition, the shielding value of the PP composite film was as high as 28.02 dB, which could effectively shield 99.84% of electromagnetic waves. This preparation strategy of coupling multiple functional layers to realize multifunctional composite films provides research ideas for the structural design of multi-purpose smart wearable electromagnetic protection composite materials.
✓ 已验证
产品关联
DOI
高影响因子
WATER RESEARCH
·
2025
·
IF 12.4
Di Zhao,Kaiming Peng,Liya Wang,Run Jiang,Xinyuan Peng,Feng Zheng,Xiangfeng Huang,Chen Cai,Jia Liu,Zhiping Cai
The application of membrane separation technology in oil‒water emulsions is restricted owing to the membrane fouling caused by surfactants and oil droplets. These stubborn contaminants cannot be completely removed through passive dragging by conventional cleaning methods. Here, we developed a surfactant-doped polypyrrole electro-triggered wettability switching membrane (SP-EWM) via electropolymerization, enabling automatic cleaning of membrane fouling. The SP-EWM exhibited large wettability switching (WCA 136.5°↔6.8°), a rapid response (300 s), and stable cycling performance. It effectively demulsified various actual waste emulsions from the oilfield, coking, and machining industries. More importantly, automatic cleaning under positive‒negative charging was achieved, resulting in a high flux recovery rate (FRR∼100%) and zero fouling accumulation over ten cycles, surpassing most previous studies. Essentially, under positive potential, the surfactants doped within the membrane rotated their hydrophilic groups (0.6 nm) and partially migrated, enabling wettability switching. This led to surfactants occupying the membrane‒water interface, reconfiguring the membrane‒water‒oil interface and promoting oil droplet coalescence (from 2.60 μm to 3.45 μm). Inverting the negative potential achieved the removal of surfactant and contaminant molecules. This study proposes an innovative automatic cleaning method, distilled as "fighting surfactants with surfactants". It fundamentally achieves membrane fouling removal by regulating the orientation of surfactant molecules within the membrane and the behavior of surfactant molecules in the cleaning solution at the membrane-liquid interface through an electric field.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TALANTA
·
2025
·
IF 6.1
Ze Li,Hao Zhao,Xiaoyan Li,Guanghong Han,Marcin Karbarz,HongDa Wang,Qiang Zhang
Dental caries, with a global prevalence of 29%, represents a major public health challenge. Traditional diagnostic methods often delay intervention, leading to irreversible tooth damage. In this study, we present a saliva-based electrochemical sensing platform for the early prediction of dental caries through the simultaneous detection of three key biomarkers: Streptococcus mutans , Ca 2+ , and pH. A nanocomposite electrode, constructed from Prussian blue, metal-organic framework, polypyrrole, and carboxylated multi-walled carbon nanotubes, provided a highly active electrochemical surface with reduced interfacial resistance and an enhanced electron transfer rate. For S. mutans detection, dual-recognition elements comprising a competence-stimulating peptide and an S. mutans -imprinted polymer were used to ensure selective binding. Ca 2+ and pH were detected using a Ca 2+ ion-selective membrane and a doped polyaniline film, respectively. The platform demonstrated detection ranges of 10 1 −10 8 CFU mL −1 for S. mutans , 0.01–100 mM for Ca 2+ , and pH 4.0–8.0, with excellent resistance to salivary interference, high reproducibility, and long-term stability. Testing on clinical samples confirmed the platform’s ability to accurately distinguish caries status, highlighting its potential as a non-invasive and portable diagnostic tool for early dental caries prediction.
✓ 已验证
产品关联
DOI
PubMed
高影响因子