Journal of Materials Chemistry C
·
2018
·Vol. 6
·期 17
·4683-4690
·
IF 5.976
Bingyan Zhu,Wenyu Ji,Zongquan Duan,Yang Sheng,Ting Wang,Qilin Yuan,Han Zhang,Xiaosheng Tang,Hanzhuang Zhang
During the last three decades, there has been significant development of quantum dot light emitting diodes (QLEDs) due to their widespread applications. However, common QLEDs depend on cadmium, which is toxic and limits their all-inclusive applications. To address this challenge, herein, we report a highly efficient and low turn-on voltage Cd-free inverted QLEDs with eco-friendly Zn–Ag–In–S quantum dots as the emissive layers. The device performance is closely related to the properties of the hole transport layer (HTL), which are explored by employing different hole transport materials, namely, 4,4′,4′′-tris(carbazol-9-yl) triphenylamine (TCTA) and N,N′-bis(naphthalen-1-yl)-N,N′ bis(phenyl)-benzidine (NPB). Although the energy levels of the lowest unoccupied molecular orbitals (LUMO) of TCTA and NPB are similar, electron leakage from the QDs to NPB is observed, which deteriorates the device performance. An excellent QLED can be achieved if a thick TCTA layer is introduced next to the QDs. Additionally, the QLED with a stepwise HTL consisting of TCTA/NPB presents a slightly higher current efficiency than the TCTA-only device, revealing that the reduction in holes accumulated at the QDs/HTL interface is beneficial for enhancing the device efficiency. Compared to the previously reported Zn–Ag–In–S based QLEDs, our device exhibits a low turn-on voltage of 2.2 V and the highest luminance (over 2000 cd m−2) and efficiency (larger than 2.1 cd A−1).
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2023
·
IF 3.9
Haoran Li,Jiao Wang,Yanping Wang,Aimei Zhao,Bing Li,Wei Li
The band gap of CdS (E g = 2.4 eV) was narrow, which made it unable to transmit short-wave sunlight through the CIGS absorber layer. Zn(O,S) thin film , prepared by doping O into ZnS, had a wider band gap, and the raw material was green and non-toxic, making it suitable as a buffer layer for solar cells. However, CBD-Zn(O,S) usually takes longer than CdS deposition. In this work, By shortening the deposition time through the fast hydrolysis of TAA . Na 3 NTA was added in the solutions to improve the quality of Zn(O,S) thin films. The effect of Na 3 NTA concentration on the complex ion contents was investigated. When Na 3 NTA was added at a concentration of 0.04 M along with TAA (0.04 M), the film had a high T% of 88.6%, E g of 3.76 eV, and a dense grain distribution. ZnS and ZnO grew at (111) and (100) crystals, respectively. Raman and XPS analyses showed the existence of Zn–S and Zn–O bonds, indicating the high crystalline quality of the Zn(O,S) thin films prepared with CBD. Finally, when the optimal concentrations of ZnSO 4 , NH 4 OH, Na 3 NTA, and TAA were 0.04 M, 0.48 M, 0.04 M, and 0.04 M, respectively, the prepared Zn(O,S) thin films could be used as a cadmium-free buffer layer for solar cells.
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2024
·
IF 4.4
Jinsong Song,Chuanhua Zhou,Xi Chen,Yang Gu,Feng Xue,Qiaqing Wu,Dunming Zhu
Cyanate-mediated epoxide ring-opening by halohydrin dehalogenases (HHDHs) is a promising method for the synthesis of important optically pure 2-oxazolidinones. However, the regio- and stereoselectivity of the naturally occurring HHDHs are still not satisfactory for styrene oxides (SOs). We used a structure-guided semi-rational design to improve the selectivity of HHDHs from Ilumatobacter coccineus (IcHheG), followed by site-saturation and combinatorial mutagenesis of Y18, L103, I104, and N196. The double mutant I104F/N196W showed dramatically improved selectivity toward SOs with excellent regioselectivity (>99 : 1) and stereoselectivity (E > 200), producing the corresponding useful and valuable (S)-4-aryl-2-oxazolidinone and (S)-SO with 98% ee. Moreover, it accepted a wider range of styrene oxides with moderate to excellent selectivity. Analysis of the substrate binding conformations showed that the regio- and stereoselectivity improvement in IcHheG was attributed to an increase of geometric distances to the two carbons and the oxygen atom of the epoxide ring for a single stereoisomer. This study elucidated key structural motifs responsible for regulating the regio- and stereoselectivity of IcHheG, offering theoretical guidance for protein engineering of HHDHs from other organisms.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Zhenyuan Ji,Guanxiang Tang,Jingchuang Zhang,Xinghang Chuan,Jiali Zhong,Zixin Lin,Peng Song,Keqiang Xu,Xiaoping Shen
Exploiting advanced anode and cathode materials with distinctive architectures and multi-component participation is of great significance to boosting the energy density of asymmetric supercapacitors. Herein, ultra-fine FeOOH nanoparticles are in situ grown on the hollow N, S co-doped carbon (HNSC) spheres using a facile solvothermal strategy and subsequent calcination process. Benefiting from the attractive hollow architecture and the synergistic effect between FeOOH and HNSC, the FeOOH/HNSC composite as anode for supercapacitors delivers an optimal capacity of 588.2 C g −1 (1 A g −1 ) and remains 88.3 % of its initial value after 10,000 cycles at 15 A g −1 in 6 M KOH. Furthermore, the HNSC-supported Co 3 S 4 nanoparticles are also prepared through a one-step solvothermal strategy. The obtained Co 3 S 4 /HNSC composite as cathode achieves a capacity of 420 C g −1 (1 A g −1 ) and maintains a high retention of 95.3 % after 10,000 cycles at 15 A g −1 . The constructed asymmetric supercapacitor using FeOOH/HNSC and Co 3 S 4 /HNSC as anode and cathode appears to possess a superior energy density of 82.3 Wh kg −1 at 821.6 W kg −1 with retention of 84.9 % after 10,000 cycles at 10 A g −1 . These attainments demonstrate that constructing multi-component electrode materials with unique structures is an effective method to optimize the electrochemical characteristics of asymmetric supercapacitors.
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Yanxi Chen,Fanyun Su,Yuqing Rang,Guangli Liu,Xinxing Xu,Yayun Ma,Jingjing Tang,Xiangyang Zhou,Juan Yang
With the explosive growth in demand for lithium-ion batteries (LIBs), the recycling of the valuable metal components in them has become particularly important. However, in the previous recycling of spent LIBs, lithium is easily lost resulting in wasted resources. In this paper, a new simple and efficient selective lithium extraction strategy is developed, which uses a thiourea-assisted subcritical water system to achieve preferential extraction of lithium from spent LIBs. Due to the enhancement of the lithium extraction process by subcritical water and the synergistic effect of S and N in thiourea on the spent LiNi x Co y Mn z O 2 (NCM) cathode powder, 99.9% of lithium is selectively leached into water. Meanwhile, the transition metals (Ni, Co and Mn) in the leaching residue can be leached out by dilute acid, and the corresponding leaching rates are 99.8%, 99.7%, and 99.9%, respectively. In addition, LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM523) cathode material with good electrochemical performance is successfully regenerated. The process has been economically and environmentally assessed as greatly simplifying the recycling process and establishing a highly efficient recycling route for spent LIBs with low environmental impact.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD SCIENCE
·
2024
·
IF 3.2
Jianping Chen,Xuehua Chen,Anqi Tang,Zhuo Wang,Kit-Leong Cheong,Xiaofei Liu,Saiyi Zhong
This study aimed to evaluate the anti-cervical cancer activity of chondroitin sulfate–functionalized selenium nanoparticles (SeCS) and to elucidate their action mechanism. Cytotoxic effect of SeCS on HeLa cells was assessed by MTT assay. Further molecular mechanism of SeCS was analyzed by flow cytometric assay and western blotting. The results showed that treatment with SeCS resulted in a dose- and time-dependent inhibition in the proliferation of HeLa cells. The data obtained from flow cytometry demonstrated that SeCS inhibited HeLa cell growth via the induction of S-phase arrest and cell apoptosis. Further mechanism analysis found that SeCS down-regulated expression levels of cyclin A and CDK2 and up-regulated p21 expression, which contributed to S arrest. Moreover, SeCS increased the level of Bax and decreased the expression of Bcl-2, resulting in the release of cytochrome C from mitochondria and activating caspase-3/8/9 for caspase-dependent apoptosis. Meanwhile, intracellular reactive oxygen species (ROS) levels were elevated after SeCS treatment, suggesting that ROS might be upstream of SeCS-induced S-phase arrest and cell apoptosis. These data show that SeCS has anti-tumor effects and possesses the potential to become a new therapeutic agent or adjuvant therapy for cancer patients. Practical Application In our previous study, we used chondroitin sulfate to stabilize nano-selenium to obtain SeCS to improve the bioactivity and stability of nano-selenium. We found that it possessed an inhibitory effect on HeLa cells. However, the molecular mechanism remains unclear. This study elucidated the mechanism of SeCS damage to HeLa cells. SeCS has the potential to become a new therapeutic agent or adjuvant therapy for cancer patients.
✓ 已验证
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2025
·
IF 7.3
Jieun Ryu,Lam Tan Hao,Hyeri Kim,Somyong Lee,Hyeonyeol Jeon,Dong Soo Hwang,Jeyoung Park,Cheol Hun Park,Dongyeop X. Oh,Jun Mo Koo,Sung Bae Park
Increased consumer awareness of animal welfare and environmental sustainability has driven the development of vegan leather alternatives to natural leather. Fossil-derived leather substitutes offer superior strength and thermal stability but often lack biodegradability, carbon neutrality and aesthetics. Biorenewable alternatives are more eco-friendly but typically suffer from insufficient thermal and mechanical properties and poor moisture resistance. This study presents the synthesis of mechanically reinforced, thermally enhanced and biodegradable poly(ester amide)s (PEAs) incorporating hydrogen bonds as vegan leather coating materials. Synthesized from biobased 1,4-butanediol, adipic acid and nylon 46 via a two-step transesterification/polycondensation process, the resulting PEAs exhibit over eight times higher tensile strength, 3-fold greater toughness, and enhanced thermal stability compared to their constituting homopolymers, poly(butylene adipate) and nylon 46. All PEAs disintegrate within 18 weeks and achieve over 60% biodegradation rate relative to cellulose under composting conditions within one month. When applied to mushroom fabrics, the PEA coating provides haptic sensations (slipperiness and softness) comparable to commercially available leather. Life-cycle assessment indicates that PEA-coated leather imposes considerably lower environmental impacts than both bovine and polyurethane-based leather. This novel material holds promise as a sustainable, high-performance vegan leather substitute.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Bin Fan,Weikun Chen,Qian He,Bigui Zhou,Zhiyun Xu,Wei Liu,Qingya Wei,Yingping Zou
To achieve the practical application of high energy density lithium–sulfur (Li–S) batteries, it is essential not only to enhance lithium-ion (Li + ) transport but also to effectively suppress the lithium polysulfides (LiPSs) shuttle effect, which remains challenge for the conventional commercial separators. In this study, a fluorinated covalent organic framework (Tp-TFAB COF) material with high selective permeability was employed to modify separators for Li–S batteries. The fluorinated Tp-TFAB COF layer can effectively enhance Li + conduction while providing electrostatic shielding against LiPSs, which were also confirmed by density functional theory calculations. As a result, Li–S batteries with Tp-TFAB/PP-modified separators retained 79.4 % of their initial capacity after 800 cycles at a 0.5C rate, with a low capacity decay of 0.026 % per cycle. Even at a high sulfur loading (7.3 mg cm −2 ), the batteries exhibited an impressive areal capacity of 5.83 mAh cm −2 . This work highlights the selective functionality of the fluorinated COFs nanoscopic channels, demonstrating its potential for applications in energy storage and beyond.
✓ 已验证
产品关联
DOI
高影响因子
BMC BIOTECHNOLOGY
·
2019
·Vol. 19
·期 1
·1-8
·
IF 2.303
Xu Lisheng,Zhang Xingtao,Gao Guizhen,Yue Sun
Background S-Phenyl-L-cysteine is regarded as having potential applicability as an antiretroviral/protease inhibitor for human immunodeficiency virus (HIV). In the present study, optically active S -phenyl-L-cysteine was prepared in a highly efficient manner from inexpensive bromobenzene using tryptophan synthase through a chemoenzymatic method. Results The chemoenzymatic method used a four-step reaction sequence. The process started with the reaction of magnesium and bromobenzene, followed by a Grignard reaction, and then hydrolysis and enzymatic synthesis using tryptophan synthase. Through this approach, S -phenyl-L-cysteine was chemoenzymatically synthesized using tryptophan synthase from thiophenol and L-serine as the starting material. Conclusions High-purity, optically active S -phenyl-L-cysteine was efficiently and inexpensively obtained in a total yield of 81.3% (> 99.9% purity).
✓ 已验证
DOI
PubMed
高影响因子
Polymer Chemistry
·
2017
·Vol. 8
·期 17
·2713-2722
·
IF 5.375
Jia Wang,Baixue Li,Dehua Xin,Rongrong Hu,Zujin Zhao,Anjun Qin,Ben Zhong Tang
The polyhydroXations, such as polyhydrothiolation and polyhydroamination, of alkynes have been well-established. However, the polyhydroalkoxylation is rarely reported. In this paper, the polyhydroalkoxylation of aromatic diynes was successfully developed in the presence of a superbase, phosphazene base (t-BuP4). A series of soluble and regio-regular anti-Markovnikov additive poly(vinyl ether)s with high molecular weights (Mw up to 40 600) were obtained in high yields (up to 99%). All the polymers are thermally and morphologically stable. The tetraphenylethene (TPE)-containing P1a2a, P1a2b and P1a2c showed unique aggregation-enhanced emission (AEE) characteristics, and their aggregates could be used for explosive detection with a superamplification quenching effect. The poly(vinyl ether)s are degradable under acidic conditions. Thus, this work not only established a new polymerization but also generated a series of functional polymeric materials that are potentially applicable in optoelectronic and biomedical fields.
✓ 已验证
DOI
高影响因子
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2020
·Vol. 22
·期 8
·4592-4601
·
IF 3.43
Li Feng,Xiaolei Ren,Yangyang Feng,Bochuan Tan,Shengtao Zhang,Wenpo Li,Jie Liu
In order to explore the effects of the structures of organic molecules on their performance and develop high-efficiency self-assembly monolayers (SAMs), two heterocycle-based indole compounds, namely FYBI and TYBI, have been synthesized by a simple route. Herein, we show that FYBI and TYBI can effectively self-assemble on a copper surface and form strong anti-corrosive monolayers to protect copper in acid medium. The compositions, morphologies, and thicknesses of the SAMs have been investigated by XPS, FTIR, SEM and ellipsometry analyses. The optimal self-assembly conditions and inhibition performance of the SAMs with O- or S-heterocycles have been studied by electrochemical tests. According to the results, TYBI displays more powerful inhibition performance than FYBI. Furthermore, the high-resolution XPS and quantum calculation results reveal that the S-heterocycle indole (TYBI) can readily donate electrons to the empty d orbital of Cu and form more robust, hydrophobic, and anti-corrosive SAMs than the O-heterocycle indole (FYBI). The inhibited corrosion is achieved by inhibiting the generation of Cu2+. This systematic study on the performance of various heterocycle-based organic compounds gives a fresh perspective for forming SAMs with certain characteristics, such as anti-corrosion ability or super-hydrophobicity.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Xianlu Lu,Xuenan Pan,Zhi Fang,Dongdong Zhang,Shang Xu,Lin Wang,Qiao Liu,Gang Shao,Dingfa Fu,Jie Teng,Weiyou Yang
Currently, a big challenge for the practical use of potassium-ion batteries (PIBs) is their intrinsically poor cycling stability, due to the relatively large radius of K+ and sluggish kinetics for intercalation/deintercalation. Here we report the scalable fabrication of N/S-codoped hollow carbon nanocubes (NSHCCs), which have the potential as an electrode for advanced PIBs with robust stability. Their discharge and charge specific capacities are ∼560 mA h g–1 and 310 mA h g–1 at a current density of 50 mA g–1, respectively. Meanwhile, they exhibit 100% specific capacity retention after 620 cycles over 9 months at a low current density of 50 mA g–1, which is state-of-the-art among carbon materials. Moreover, they demonstrate nearly no sacrifice in specific capacities with 99.9% retention after 3000 cycles over 4 months under a high current density of 1000 mA g–1, superior to most carbon analogues for potassium storage previously reported. The improved electrochemical performance of NSHCC can be mainly attributed to the unique hollow carbon nanocubes with incorporated N and S dopants, which can expand the carbon layer spacing, facilitate K+ adsorption, and relieve the volume change during the intercalation/deintercalation of K+ ions.
✓ 已验证
DOI
PubMed
高影响因子