RSC Advances
·
2016
·Vol. 6
·期 86
·83288-83295
·
IF 3.289
Chongmin Liu,Shuai Liu,Pingxiao Wu,Yaping Dai,Lytuong Tran,Nengwu Zhu,Chuling Guo,Ihsanullah Sohoo
Modified calcium saturated montmorillonite (Mt) was prepared at different 3-aminopropyltriethoxysilane (APTES) loadings through grafting. The as-products were characterized by XRD, FTIR and elemental analysis. Surface analysis such as acidity was examined at different H+ concentrations, showing that the release of OH− from the modified samples increased in the following order: APTES4.0CEC–Mt > APTES3.0CEC–Mt > APTES2.0CEC–Mt > APTES1.0CEC–Mt. Batch experiments were conducted and different conditions (pH, temperature and co-existing ions) were used to evaluate the adsorption capacity of the modified samples. The study developed a new way to confirm the mechanism, which indicated that ligand adsorption was the dominant sorption mechanism for Sr(II) uptake onto APTES–Mts. In general, APTES grafted montmorillonite possessed a higher efficiency of Sr(II) uptake and showed great potential for Sr(II)-rich wastewater treatment.
研究领域:
环境科学
·
材料科学
·
化学工程
·
环境污染治理
·
吸附科学
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS CHEMISTRY
·
2012
·Vol. 22
·期 15
·7291-7299
·
IF 5.968
Jungang Hou,Zheng Wang,Wenbin Kan,Shuqiang Jiao,Hongmin Zhu,R. V. Kumar
Large-scale hydrogen production through water splitting using photocatalysts with solar energy can potentially produce clean fuel from renewable resources. In this work, photocatalytic evolution of H2 with a high efficiency was achieved using graphene oxide (GO) nanosheets decorated with CdS sensitized TaON core–shell composites (GO–CdS@TaON). The CdS@TaON core–shell nanocomposites were prepared by an ion-exchange route with assistance from a hydrothermal process on GO as the support. The TaON core–shell composites containing 1 wt% CdS nanocrystals showed a high rate of H2-production at 306 μmol h−1 with an apparent quantum efficiency (QE) of 15% under 420 nm monochromatic light. The rate of hydrogen formation was 68 times faster in comparison with the rate observed on pure TaON. The rate was further increased to 633 μmol h−1 with a high quantum efficiency of 31% when the GO–CdS@TaON hybrid composite was coupled with 1 wt% of graphene oxide and 0.4 wt% of Pt (about 141 times higher than that of the pristine TaON). This high photocatalytic H2-production activity is ascribed firstly to the presence of CdS nanocrystals that alter the energy levels of the conduction and valence bands in the coupled semiconductor system; secondly to the involvement of graphene oxide that serves as an electron collector and transporter to efficiently lengthen the lifetime of the photogenerated charge carriers from CdS@TaON composites. This investigation can open up new possibilities for the development of highly efficient TaON-based photocatalysts that utilize visible light as an energy source.
研究领域:
材料化学
·
光催化
·
能源科学
·
纳米材料
·
半导体物理
·
可再生能源
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2015
·
IF 4.321
Yajie Qian,Xuefei Zhou,Yalei Zhang,Peizhe Sun,Weixian Zhang,Jiabin Chen,Xin Guo,Xiao Zhang
Calcium peroxide (CP) combined persulfate (PS) oxidation is an emerging in situ chemical oxidation (ISCO) technology for ground water remediation. Many field cases also confirm its effectiveness in ground water remediation while few research articles document it. This study investigated the performance of α-methylnaphthalene (MN) degradation by PS/CP to further understand this dual oxidant application in ISCO. Results showed that MN could be completely oxidized in 72 h with 1 g L −1 PS and 1 g L −1 CP. The degradation rates of MN increased with the increase of PS and CP concentration. MN degradation was significantly enhanced with the solution pH decrease, because CP was easier to dissolve and generated more radicals in acidic condition. Solutes in ground water including chloride ions, alkalinity and natural organic matters presented inhibitory effect on MN degradation in this dual oxidant system. Plausible mechanisms of the sulfate and hydroxyl radicals in the system were proposed based on the results of radical scavenging experiments and electron spin resonance (ESR) tests. It appeared that surface OH of CP was also responsible for the MN removal. The major oxidation products in this study were 1-naphthaldehdye, naphthalene-1-ylmethanol and 4-hydroxy-4-methylnaphthalen-1(4H)-one. To better understand PS/CP in ISCO, the degradation of MN was tested in ground water matrix, which showed satisfactory efficiency. The results of this study provided some detail information of PS/CP dual oxidant in degradation organic contaminants, which might provide some references for the application of this technology in ISCO.
研究领域:
环境工程
·
环境化学
·
污染控制
·
土壤与地下水修复
·
高级氧化技术
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2019
·
IF 14.229
Jinxing Yu,Lei Zhang,Jun Qian,Zhirong Zhu,Shuang Ni,Gang Liu,Xiaoxiang Xu
Starting from two wide band gap semiconductors AgTaO 3 and SrTiO 3 , we managed to reduce the band gap by forming their solid solutions, i.e. (AgTaO 3 ) 1-x (SrTiO 3 ) x (0.0 ≤ x ≤ 1.0). These solid solutions all adopt cubic perovskite structure similar to SrTiO 3 and high temperature phase of AgTaO 3 , suggesting that SrTiO 3 is helpful to stabilize AgTaO 3 in its high temperature cubic phase. Substantial improvements over photocatalytic hydrogen production were realized in these solid solutions which clearly outperform their parent compounds AgTaO 3 and SrTiO 3 . In-situ exolution of silver nanoparticles at the surface of solid solutions (x = 0.2) substantially strengthen the visible light absorption due to localized surface plasmons of these silver nanoparticles . This contributes to further improvements on both photocatalytic hydrogen and oxygen production under visible light illumination (λ ≥ 400 nm). Apparent quantum efficiency as high as ˜ 2.02% and ˜ 0.11% was achieved at solid solutions (x = 0.2) decorated with silver nanoparticles for full range (λ ≥ 250 nm) and visible light (λ ≥ 400 nm) illumination respectively. Photoelectrochemical analysis suggests that solid solutions own a better charge separation conditions than their parent compounds. Furthermore, the band edge positions of solid solutions (x = 0.2) lie approximately in the middle between AgTaO 3 and SrTiO 3 , being ideal for solar water splitting reactions.
研究领域:
材料科学
·
光催化
·
能源化学
·
半导体物理
·
纳米材料
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2017
·
IF 0
J. He,X.-H. Lu,Y. Shen,R. Jing,R.-F. Nie,D. Zhou,Q.-H. Xia
Cyclohexanol is an excellent starting material for fuel production, but direct selective hydrogenation of phenol to cyclohexanol under mild conditions is a challenge. Herein we report a catalyst made of Ni nanoparticles supported on high-surface silica, which is highly active for selective formation of cyclohexanol under 1.0 Mpa pressure of hydrogen in aqueous medium without additives. Conversion of 100 mol% and selectivity up to 100% are achieved within 4 h and 1.0 MPa H 2 . Some factors such as the type of the source of silica, the loading of Ni, the reaction temperature and time, the H 2 pressure play important roles in controlling the selective hydrogenation. The generality of the 10%Ni/SiO 2 -1 catalyst for this reaction is demonstrated by selective hydrogenation of other hydroxylated aromatic compounds as well.
研究领域:
催化化学
·
有机合成
·
材料化学
·
绿色化学
·
能源化学
✓ 已验证
DOI
APPLIED SURFACE SCIENCE
·
2018
·
IF 4.439
Shuai Zhou,Xiang Zhou,Gazi Hao,Wei Jiang,Tianhe Wang
Modulation of the density (from 3.5 to 64 mg cm −3 ), hydrophobicity and oil-uptake capability of graphene aerogels in extensive ranges were achieved by reacting (3-Mercaptopropyl)trimethoxysilane (MPS) with graphene oxide solutions under heating. The reaction allowed a characteristic silicone substructure to be formed on graphene and joint the graphene layers firmly together. With the increase of MPS concentrations (≤ca. 0.2 vol%), the nano silicone polymer grown on graphene functioned as a “linker” and “spacer”, leading to a substantial decrease of the aerogel density. Because of the formation of silicone polymer and the characteristic nano-micro substructures on the backbones of graphene aerogels, the graphene aerogels exhibited a high hydrophobicity with the water contact angle consistently exceeding 142 degrees. Functionalized graphene aerogels with a density of 3.5 mg cm −3 were conveniently fabricated that displayed an extraordinary oil absorption capacity, 182 times for lubricating oil and 143 times for n-hexane of its own weight. Furthermore, the aerogels maintained their ultra-high absorption capability even after 20 absorption-distillation cycles, due to structural integrity held by the strong interfacial adhesion between graphene sheets and polymer chains of aerogels. This study offers a promising graphene aerogels and also provides a strategy for fabricating extra low dense functional materials.
研究领域:
材料科学
·
纳米科技
·
高分子化学
·
环境功能材料
·
表面与界面工程
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2017
·
IF 6.216
Xiang Li,Huaili Zheng,Yili Wang,Yongjun Sun,Bincheng Xu,Chuanliang Zhao
Modified natural polymer flocculants has been the focus of research in environmental engineering field. Natural large molecular compound, chitosan (CTS) with many functional amino and hydroxyl groups can be easily modified to enhance its original functions. This work presents an environmentally friendly chitosan-based cationic polyacrylamide flocculants (CTS-g-PAMA) with enhanced function of sterilization and flocculation . CTS-g-PAMA was synthesized through Ultraviolet (UV)-initiated copolymerization. Structure characterization of FTIR, 1 H NMR, XRD and UV spectrum confirmed the successful grafting of AM and MAPTAC. Scanning electron microscopy (SEM) analysis results showed that CTS-g-PAMA exhibited a porous structure with a prodigious surface area. CTS-g-PAMA was then applied to treat a series of simulated waste water containing kaolin or Escherichia coli . Flocculation tests indicated that CTS-g-PAMA not only showed excellent flocculation effect but also showed high sterilization capability. A series of ONP concentration measurement tests through UV spectra analysis and 3D EEM analysis of suspension before and after flocculation were conducted to study sterilization mechanism, and results revealed the sterilization effect of CTS-g-PAMA was essentially bactericidal, not just antibacterial.
研究领域:
环境工程
·
高分子化学
·
水处理技术
·
材料科学
·
微生物学
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2014
·
IF 3.916
Jiachang Huang,Li Zhou
The hydrolyzed peach gum polysaccharide (HPGP) prepared at acidic condition is investigated as an anionic polyelectrolyte for the first time. A hydrolysis mechanism is proposed by monitoring the hydrolysis efficiency and morphological change of crude peach gum, and the intrinsic viscosity of resulted HPGP as a function of hydrolysis time. Fourier transform infrared (FTIR) spectroscopy and ζ-potential measurements reveal that HPGP with multiple carboxylic groups is negatively charged in water in the pH range 3–11. The HPGP exhibits remarkable pH and ionic strength responsiveness, as proven by dynamic light scattering (DLS) and atomic force microscopy (AFM) measurements. Moreover, the layer-by-layer (LbL) self-assembly experiments further confirmed that the HPGP can be utilized as an anionic polyelectrolyte . Considering the facile availability, favorable compatibility and intriguing functionality of HPGP, this study opens up enormous opportunities for the large-scale utilization of peach gum resource.
研究领域:
高分子科学
·
生物材料
·
纳米技术
·
药物递送
·
表面化学
✓ 已验证
DOI
高影响因子
JOURNAL OF THE ENERGY INSTITUTE
·
2021
·
IF 6.186
Dongjing Liu,Lingtao Yang,Bin Li,Jiang Wu
Rice husk , as an abundant agricultural waste and renewable biomass, is adopted to produce porous silica which is used as a potential carbon-free adsorbent for mercury emission control of coal-fired power plants. The rice husk derived porous silica (RHS) exhibits a good Hg 0 adsorption capability with Hg 0 removal efficiency above 80% in the temperature range of 60–140 °C, which is plausibly due to the big specific surface area and mesoporous structure. The mercury removal performance of RHS can be evidently reinforced by KBr modification. The optimal KBr loading value and reaction temperature are 2 wt% and 140 °C, respectively. Acidic gas components, such as NO and SO 2 , both show slight inhibitive effects on Hg 0 adsorption process probably owing to the competitive adsorption or the elimination of adsorption sites.
研究领域:
环境科学
·
大气污染控制
·
材料科学
·
吸附技术
·
能源工程
✓ 已验证
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2012
·
IF 2.159
Mi Wang,Yanfeng Gao,Lei Dai,Chuanxiang Cao,Xuhong Guo
Nanoscaled SnO 2 with different morphologies has been synthesized via a simple hydrothermal process at 180 °C using polyvinylpyrrolidone (PVP), sodium dodecyl sulfonate (SDS), cetyl trimethyl ammonium bromide (CTAB) or tetrapropyl ammonium bromide (TPAB) as surfactant . All the prepared SnO 2 are of a tetragonal crystal structure. Nanocubes, nanorods , nanosheets , nanobelts and nanoparticles were prepared when changing the type and dosage of organic surfactants. It is shown that anionic surfactant (SDS) and cationic surfactant (CTAB or TPAB) at their suitable addition amounts can largely influence the morphologies of SnO 2 nanocrystals . The effect is significantly dependent on the solvent types: water or ethanol. The non-ionic surfactant (PVP) can also change the morphologies like SDS but the impacts are less obvious. The effect of surfactants on the shape and size of SnO 2 nanoparticles was discussed in detail. The particle growth mechanism is described based on the electrostatic interactions and Van der Waals’ forces.
研究领域:
材料科学
·
纳米技术
·
无机化学
·
物理化学
✓ 已验证
DOI
高影响因子
FUEL
·
2022
·
IF 8.035
Jian Qiao,Xiang-Ming Hu,Yun-Tao Liang,Qian Zhang,Wei Wang,Yan-Yun Zhao,Shuang Ju,Fu-Chao Tian
In order to improve the stability time and foaming ratio of gel foam, and change the traditional preparation method of gel foam. In this paper, using super-hydrophobic nanoparticles , PVA, sodium tetraborate and sodium bicarbonate as the main raw materials, based on the self-assembly effect of super-hydrophobic nanoparticles and hydrophilic macromolecules, a high-foaming gel foam (PGF) without foaming agent was prepared. Through the test, the foaming volume of the 100 ml PGF can reach 329 ml without adding foaming agent, which is 1.4 times of the traditional gel foam (TGF) and 1.2 times of the viscous foam (VF). Even without foaming agent, the PGF has a half-life of more than 13 days and can retain water for more than 15 h at 100 °C. Response surface analysis showed that the foaming performance of the PGF was affected by nanoparticles, sodium tetraborate and sodium bicarbonate, among which the content of nanoparticles was the main factor. At the same time, sodium tetraborate and sodium bicarbonate also significantly affect the water retention performance of PGF. Fire prevention experiments show that the gel foam prepared by this method also has excellent fire prevention ability, which can effectively inhibit the consumption of hydroxyl group and the generation of methyl and methylene group in the process of coal oxidation. Moreover, it can still play an inhibiting ability at a high temperature of 400 °C, and can effectively prevent the recurrence of coal fire after extinguishing. The development of PGF provides a new method for the preparation of gel foam in the future. At the same time, the application of foaming agent is avoided, which reduces the pollution of surfactant to the environment.
研究领域:
材料科学
·
消防工程
·
能源安全
·
高分子化学
·
界面科学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2021
·Vol. 48
·期 3
·3636-3646
·
IF 4.527
Shunxiang Wang,Songwen Fang,Kexiang Zhang,Yongjin Zou,Zuoan Xiao,Fen Xu,Lixian Sun,Cuili Xiang
A poor electrical conductivity and short cycle life limits the wide application of transition metal oxides in energy storage applications. In this study, yolk-shell structured CuCo 2 S 4 was grown on NiO nanosheets (NiO@CuCo 2 S 4 ) via a hydrothermal method and vulcanization , which combined the synergistic interactions between Ni, Co, and Cu. The effect of varying the amount of the vulcanizing agent (thiourea) on the electrochemical performance of NiO@CuCo 2 S 4 was also investigated. Moreover, the amount of thiourea not only tuned the morphology of the composite, but significantly influenced its electrochemical performance. When the Cu 2+ : Co 2+ : thiourea molar ratio in the precursor solution was 1:2:6, the obtained NiO@CuCo 2 S 4 exhibited the best electrochemical performance of the various systems examined, with a specific capacitance of 1658 F g −1 being achieved at 1 A g −1 . Density functional theory calculations further confirmed the excellent synergistic effect between NiO and CuCo 2 S 4 . In addition, the asymmetric supercapacitor composed of a NiO@CuCo 2 S 4 positive electrode reached an ultrahigh energy density of 73 Wh kg −1 at a power density of 802 W kg −1 , as well as excellent cycling stability (i.e., 91% capacitance retention after 5000 cycles). These results suggest that NiO@CuCo 2 S 4 is a promising candidate for use in energy storage applications.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）