JOURNAL OF POWER SOURCES
·
2016
·
IF 6.333
Xiaowei Kong,Xiaoliang Zhou,Yu Tian,Xiaoyan Wu,Jun Zhang,Wei Zuo
Development of cost-effective and efficient electrochemical catalysts for the fuel cells electrode is of prime importance to emerging renewable energy technologies . Here, we report for the first time the novel La 0.9 Ca 0.1 Fe 0.9 Nb 0.1 O 3−δ (LCFNb) perovskite with good potentiality for the electrode material of the symmetrical solid oxide fuel cells (SSOFC). The Sc 0.2 Zr 0.8 O 2−δ (SSZ) electrolyte supported symmetrical cells with impregnated LCFNb and LCFNb/SDC (Ce 0.8 Sm 0.2 O 2−δ ) electrodes achieve relatively high power outputs with maximum power densities (MPDs) reaching up to 392 and 528.6 mW cm −2 at 850 °C in dry H 2 , respectively, indicating the excellent electro-catalytic activity of LCFNb towards both hydrogen oxidation and oxygen reduction. Besides, the MPDs of the symmetrical cells with LCFNb/SDC composite electrodes in CO and syngas (CO: H 2 = 1:1) are almost identical to those in H 2 , implying that LCFNb material has similar catalytic activities to carbon monoxide compared with hydrogen. High durability in both H 2 , CO and syngas during the short term stability tests for 50 h are also obtained, showing desirable structure stability, and carbon deposition resistance of LCFNb based electrodes. The present results indicate that the LCFNb perovskite with remarkable cell performance is a promising electrode material for symmetrical SOFCs.
研究领域:
材料科学
·
电化学
·
能源材料
·
燃料电池
·
催化化学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2012
·Vol. 39
·期 4
·3915-3919
·
IF 1.751
Junxia Wang,Hengchang Nie,Chunfeng Lan,Genshui Wang,Xianlin Dong,Xuefeng Chen,Fei Cao,Hongliang He
Porous Pb (Zr 0.95 Ti 0.05 ) O 3 / x MgO (PZT/MgO, x =0, 0.1, 0.2, 0.5 and 1.0 wt%) ferroelectric ceramics were prepared with MgO nanoparticles as reinforcing phase. The effects of MgO nanoparticles on the phase, microstructure, electrical and mechanical properties of as-prepared ceramics were investigated. The results show that the grain size is reduced obviously when increasing the amount of MgO. Compared with pure porous PZT, T C of MgO-added PZT ceramics shifts to higher temperature. Moreover, dielectric, ferroelectric and piezoelectric properties show no much degradation. Further, PZT/MgO ceramics possess enhanced mechanical properties compared to pure porous PZT ceramics, the largest increment of the fracture toughness and hardness being 31.3% and 19.8%, respectively. The optimal electrical and mechanical properties are obtained with the addition of less than 0.5 wt% MgO nanoparticles.
研究领域:
材料科学
·
无机非金属材料
·
功能陶瓷
·
电子材料
·
固态物理
·
纳米复合材料
✓ 已验证
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·Vol. 15
·期 3
·2528-2538
·
IF 1.5
Wenhui Geng,Mengmeng Zheng,Dan Chen,Xianwen Wang,Zekai Zhang,Yishan Lin,Dongqin Cai,Huiqin Li,Guobo Huang,Yanxian Jin Yu,Binbin Yus
Palladium catalyst (Pd) are made attention to application in alcohol fuel cells due to unique performance, as well as the resource abundance and low cost, but the catalyst performance and stability of the catalysts are still not satisfied. In this article, the novel PdFe/B-N-G catalysts with the double element alloying and dual-doping for ethanol electro-oxidation are successfully prepared and determined by XRD, TEM and XPS. TEM results reveal a relatively uniform and high dispersion of Pd particles is observed on PdFe/B-N-G catalyst. The XPS analysis indicates that Pd(0) contents of the PdFe/B-N-G catalyst are increased on account of the B, N-doping effect. Being explored as the catalyst to the ethanol oxidation reactions, the PdFe/B-N-G catalysts exhibit the better electrocatalytic activity with higher current densities and catalyst stability compared to those of PdFe/G and Pd/B-N-G, which can be attributed to the synergistic effect of the enhanced PdFe alloying and the B, N-doping, that can produce more activity sites dispersing on the surface of graphene. Thus, the novel PdFe/B-N-G catalysts can be the potential alternate in alcohol fuel cells.
研究领域:
电化学
·
纳米催化
·
能源材料
·
燃料电池
·
表面科学
✓ 已验证
DOI
高影响因子
International Journal of Refrigeration
·
2019
·
IF 3.177
Qing Cheng,Wang Pei
As different liquid desiccants show different dehumidification and operation characteristics, the comprehensive performance comparison between two liquid desiccants (LiCl and LiBr aqueous solutions) was conducted in this paper. The electronic conductivity of the LiBr aqueous solution was experimentally investigated and the electronic conductivity model of the LiBr solution was acquired. Compared with the LiCl solution, the LiBr solution has higher electronic conductivity within the concentration range of 20–40% and the temperature range of 20–60 °C, which means the ED regenerator using LiBr solution has lower electric resistance. The increase of the liquid desiccant concentration is beneficial to the moisture removal rate but harmful to the whole system COP and dehumidification efficiency, while the effect of the liquid desiccant temperature is opposite. Within the liquid desiccant temperature range of 20–30 °C, the whole system COP varies among 1 and 2.8 for the LiCl solution with the concentration of 38% at the exit of the ED regenerator, and it is among 2.5 and 5.8 for the LiBr solution with the concentration of 55% after regeneration. Using the LiCl solution can give the system the better dehumidification potential, while using LiBr solution can help the system to acquire the better whole performance and economy.
研究领域:
热能工程
·
暖通空调
·
化学工程
·
能源利用
·
环境控制技术
✓ 已验证
DOI
高影响因子
BIOSENSORS & BIOELECTRONICS
·
2011
·Vol. 30
·期 1
·112-117
·
IF 5.361
Huanshun Yin,Yunlei Zhou,Xiaomeng Meng,Kun Shang,Shiyun Ai
The graphene nanosheets and carbon nanospheres mixture (GNS–CNS) was prepared by electrolyzing graphite rob in KNO 3 solution under constant current, which was characterized by TEM, AFM, SEM, FT-IR, XRD, XPS, TGA and UV–vis. The nano-mixture can keep stable in water for more than one month. Based on this kind of mixture material, a novel electrochemical biosensing platform for glucose determination was developed. Cyclic voltammetry of glucose oxidase (GOD) immobilized on GNS–CNS/GCE exhibited a pair of well-defined quasi-reversible redox peaks at −0.488 V ( E pa ) and −0.509 V ( E pc ) by direct electron transfer between the protein and the electrode. The charge-transfer coefficient ( α ) was 0.51, the electron transfer rate constant was 2.64 s −1 and the surface coverage of HRP was 3.18 × 10 −10 mol cm −2 . The immobilized GOD could retain its bioactivity and catalyze the reduction of dissolved oxygen. The glucose biosensor has a linear range from 0.4 to 20 mM with detection limit of 0.1 mM. Moreover, the biosensor exhibits acceptable reproducibility and storage stability. The fabricated biosensor was further used to determine glucose in human plasma sample with the recoveries from 96.83% to 105.52%. Therefore, GOD/GNS–CNS/GCE could be promisingly applied to determine blood sugar concentration in the practical clinical analysis.
研究领域:
分析化学
·
纳米生物技术
·
电化学传感
·
生物医学工程
·
临床检验
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2020
·
IF 6.215
Yuexiu Du,Chongwu Liu,Yunzhao Liu,Qi Han,Xiaowei Chi,Yu Liu
Rechargeable metal batteries are desirable for next-generation high specific energy electrochemical energy storage systems . However, low coulombic efficiency and severe dendrite growth during the stripping/plating of metals (e.g. Li, Na, Zn and etc.) considerably hinder their practical applications. To address the above issues, in this work, a facile, versatile, and scalable approach by means of spray depositing carbon fiber micron film (CFMF) onto metals is developed. The porous, uniform, and highly conductive CFMF firmly attached to metal surface with a scaffold structure is found to effectively guide the uniform plating/stripping of both the Zn metal in aqueous electrolytes and the Li metal in organic electrolytes, thus enabling much higher efficiencies of Zn (98.4%) and Li (99.7%) for the 100th cycle on the CFMF-modified current collectors than those of bare current collectors. And the so far record high cycling stability for the symmetric cells using CFMF/Zn (2500 h) and CFMF/Li (1000 h) electrodes is achieved at 1 mA cm −2 and 4 mA cm −2 , respectively. Benefiting from the delicately designed CFMF-modified Zn or Li metal anodes , the full cells of Zn–MnO 2 and Li–LiMn 2 O 4 are rendered excellent rate capability and significantly extended cycle life.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米技术
·
电池技术
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 65
·52382-52387
·
IF 3.84
Minxia Li,Xiaowei Wang,Yanfang Wang,Bingwei Chen,Yuping Wu,Rudolf Holze
A new composite gel polymer electrolyte of nonwoven fabric (NWF) and methyl cellulose (MC) with good mechanical properties and outstanding thermal and electrochemical stability is prepared by a simple and green casting process followed by absorbing liquid electrolyte. Its characteristics are investigated by scanning electron microscopy, FT-IR, thermogravimetric analysis (TGA). Due to the synergistic action between MC matrix and the NWF framework, the composite gel polymer electrolyte achieves higher ionic conductivity (0.29 mS cm−1) at ambient temperature and larger lithium ion transference number (0.34) than those for the conventional Celgard 2730 separator (0.21 mS cm−1 and 0.27, respectively) in 1 mol L−1 LiPF6 electrolyte, and their activation energies are similar. In addition, the composite membrane shows better mechanical strength than the pure MC membrane. The evaporation rate of the liquid electrolyte at elevated temperature is much decreased. The assembled Li//LiFePO4 cell using this composite gel membrane exhibits better cycling retention and higher discharge capacity than those based on Celgard 2730 separator and pure MC gel membrane. These fascinating characteristics suggest that this unique composite gel polymer electrolyte can be used for lithium ion batteries with good performance and low cost.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子材料
·
电池技术
✓ 已验证
DOI
高影响因子
Energy & Environmental Materials
·
2022
·Vol. 6
·期 3
·e12351
·
IF 13.443
Qiyu Wang,Xiangqun Xu,Bo Hong,Maohui Bai,Jie Li,Zhian Zhang,Yanqing Lai
Quasi-solid-state lithium metal battery is a promising candidate for next generation high energy density and high safety power supply. Despite intensive efforts on electrolytes, uncontrolled interfacial reactions on lithium with electrolyte and patchy interfacial contacts still hinder its practical process. Herein, we bring in rationally designed F contained groups into polymer skeleton via in-situ gelation for the first time to establish quasi-solid-state battery. This method achieves a capacity retention of 90% after 1000 cycles at 0.5C with LiFePO 4 cathodes. The interface constructed by polymer skeleton and reaction with –CF 3 lead to the predicted solid electrolyte interface species with high stability. Furthermore, we optimize molecular reactivity and interface stability with regulating F contained end groups in the polymer. Comparisons on different structures reveal that high performance solid stable lithium metal batteries rely on chemical modification as well as stable polymer skeleton, which is more critical to construct robust and steady SEI with uniform lithium deposition. New approach with functional groups regulation proposes a more stable cycling process with a capacity retention of 94.2% at 0.5C and 87.6% at 1C after 1000 cycles with LiFePO 4 cathodes, providing new insights for the practical development of quasi-solid-state lithium metal battery.
研究领域:
电化学
·
材料科学
·
能源存储
·
界面化学
·
高分子化学
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2017
·
IF 3.133
Jianguang Jia,Chunmei Liu,Yuan Lin,Xiaowen Zhou
Charge recombination is an important factor that limits the cell efficiency of quantum dot sensitized solar cells (QDSSCs). Herein, we report a facile way to improve the cell performance of CdSe sensitized ZnO QDSSC by overcoating a thin layer of ZnSe on CdSe/ZnO film through a successive ionic layer adsorption and reaction (SILAR) procedure. Photovoltaic investigations indicate that ZnSe overcoating can increase photocurrent and photovoltage of the cell, resulting in significant enhancement of the cell efficiency, which is much better than the widely used traditional ZnS material. The superior role of ZnSe overcoating is ascribed to its large inhibition of charge recombination loss owing to its suitable band structure, efficient passivation of ZnO and CdSe QDs as well as its small lattice mismatch with CdSe that leads to the large decrease of surface/interface defects in CdSe/ZnO photoanode . This finding provides an alternative efficient way to enhance the cell performance of ZnO based QDSSC by suppressing the charge recombination.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
半导体物理
·
光伏技术
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Xiaofei Liu,Jian Wang,Zhonghui Shen,Hongjian Zhang,Baowen Li,Yong Zhang,Xin Zhang
Flexible organic/inorganic piezoelectric nanocomposites are highly demanded for flexible wearable electronic devices due to their excellent mechanical flexibility and high piezoelectric performance. However, the output performance of ceramic-polymer-based piezoelectric nanogenerators (PENGs) is restricted by the poor electrical conductivity of the organic matrix and the distinct discrepancy in mechanical strength between inorganic filler and organic matrix. Herein, we propose a flexible piezoelectric polymer nanocomposite based on CNTs@PZT nanofibers (NFs) network where the carbon nanotubes (CNTs) were introduced into the piezoelectric lead zirconate titanate (PZT) NFs to simultaneously improve the electrical conductivity and mechanical strength of nanocomposites. When subjected to a periodical bending deformation , the CNTs@PZT NFs network-based PENG with optimal addition of CNTs (0.6 wt%) generates a maximum electrical output up to ∼12.5 V and ∼80 nA cm −2 which is four times higher than that of PENGs without CNTs doping. An ultrahigh power density of 91.7 nW cm −2 is obtained with an external load resistance of 40 MΩ when pressed via a 10 N compressive force , and furthermore, the generated power could charge a capacitor and further light a commercial LED. This work may pave a new way for the development of high-output nanocomposite-type PENGs.
研究领域:
材料科学
·
纳米科技
·
能源材料
·
柔性电子学
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2014
·Vol. 131
·期 15
·
IF 1.64
Dan Wang,Zhongling Zhao,Lina Yu,Kejin Zhang,Hui Na,Shanqiang Ying,Dechao Xu,Guo Zhang
The modified polypropylene (PP) separators with self-polymerization of dopamine on the surfaces are prepared by a simple solution-immersion method to improve the interfacial hydrophilic and discharge performance. The contact angle test and the liquid electrolyte uptake capacity test results show that the wettability and the electrolyte-retention ability of polydopamine-modified separator are improved significantly. The robust and thin polydopamine layer on the surface also enhances thermal performance and tensile strength of the modified PP separator certified by DSC and tensile strength tests. The ionic conductivity of the modified PP separator is up to 3.08 mS·cm −1 , ∼2.5 times of the bare separator. Good discharge capacity retention and C-rate discharge performance are demonstrated by a 2025 coin half-cell with the liquid electrolyte-soaked polydopamine modified PP separator sandwiched between lithium metal anode and LiFePO 4 cathode. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131 , 40543.
研究领域:
材料科学
·
电化学
·
高分子化学
·
能源材料
·
电池技术
✓ 已验证
DOI
高影响因子
Sustainable Energy & Fuels
·
2023
·Vol. 8
·期 2
·358-368
·
IF 5.6
Hai Lu,Peichun Wang,Yitian Ma,Meng Liu,Linqing Chang,Rui Feng,Shuliang Luo,Zhiyun Zhang,Yi Wang,Yan Yuan
In this study, quasi-solid polymer electrolytes incorporating an ionic liquid (ILQSEs) fabricated in different organic solvents via a thermally-initiated polymerization strategy were investigated for flexible supercapacitors (SCs). It was found that low-viscous acetonitrile (AN) with a strongly-polar nitrile group was remained in the polymer matrix, which favored a higher ionic conductivity, wider electrochemical window, and better thermal stability of the ILQSE compared to its propylene carbonate (PC) counterpart. Moreover, the in situ polymerized quasi-solid electrolyte achieved close contact with the porous carbon electrode, accompanied by the favorable permeation of the IL into the electrode for enhancing the ion-transport kinetics and interface stability. Consequently, the as-assembled SC with the AN-based ILQSE delivered a high specific energy and specific power, excellent cycle stability, and reliable safety.
研究领域:
材料科学
·
电化学
·
高分子化学
·
能源存储
·
纳米科技
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）