JOURNAL OF MATERIALS RESEARCH
·
2024
·Vol. 39
·期 14
·1989-1998
·
IF 2.7
Li Xin,He Yu,Guo Yangyang,Mao Huibing,Chen Ye,Wang Jiqing,Fang Weifeng
With the excitation of a 978 nm laser, upconversion emission of the NaMgF 3 : Tm 3+ , Yb 3+ , Mn 2+ submicron particles include two red emission bands located at 648 and 698 nm and a green emission at about 510 nm in the visible range. The experimental results confirm that the Mn 2+ ions play the key role in the emission modulation between the 648 nm and 698 nm. The incident laser power dependence confirms that the emission at 648 nm is completely different from the emissions at 698 nm, and more than 3 photons are involved in the emission at 648 nm. With the doping of Mn 2+ ions, the intensity ratio R 1 / R 2 of the emission at 648 nm and 698 nm increases first, and decreases for the Mn 2+ concentration larger than 2%. The incident laser power and laser pulse-width also have evident modulation effect of the UC emissions. All the Mn 2+ related phenomena are due to the energy transfer paths ET5 and ET6 between the Tm 3+ and Mn 2+ ions. Graphical abstract
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2024
·
IF 2.7
Yuangong Ma,Wensheng Zhang,Zhifang Wu,Zhishan Liang,Youlin Huang,Qingmei Tan,Tianren Liu,Dongxue Han,Li Niu
In the realm of photocatalysis, effectively utilizing solar energy, especially the near-infrared (NIR) spectrum, presents substantial challenges. To tackle this issue, a novel composite of NaYF4:Yb3+/Er3+@Cu2O@MoS2@Fe3O4 (denoted as NYE@Cu2O@MoS2@Fe3O4) was ingeniously fabricated and assessed for the photodegradation of organic contaminants. By harnessing the distinct properties of upconversion materials, narrow bandgap semiconductors, and magnetic substances, the NYE@Cu2O@MoS2@Fe3O4 catalyst possesses a photodegradation rate of 92% for the rhodamine B dye under NIR light radiation, which is superior to NYE@Cu2O (50%) and NYE@Cu2O@MoS2 (85%). The enhanced performance in the near-infrared photocatalysis of NYE@Cu2O@MoS2@Fe3O4 is mainly attributed to the synergistic effect of various components, which promotes an increase in photo-induced carrier generation and facilitates their efficient transfer and energy utilization under NIR irradiation. This study provides a possible route for the near-infrared photocatalytic degradation of pollutants in areas with limited light or even dark conditions.
研究领域:
材料科学
·
环境科学
·
光催化技术
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2017
·
IF 2.446
Lin Lin,Jixing Chen,Zhezhe Wang,Zhuohong Feng,Feng Huang,Biao Zheng,Lili Huang,Zhipeng Yu,Zhiqiang Zheng
The NaBaPO 4 :Eu 2+ ,Yb 3+ quantum-cutting (QC) phosphors were prepared by the solid-state reaction. We confirm the luminescence of Yb 3+ is mainly derived from QC rather than common down-conversion. The QC efficiency η QE calculated from the luminescence decay curves reached a maximum as high as 197.4%. Furthermore, the QC emission was enhanced by decorating with quasi-spherical and uniform (∼100 nm) Ag nano-particles, due to localized surface plasmon resonance. The enhancement factor reached a maximum as 1.2337.
研究领域:
材料科学
·
光学
✓ 已验证
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2021
·
IF 4.641
Mei-Hong Liu,De-Long Zhang
Er 3+ /Yb 3+ -codoped NaLa(WO 4 ) 2 phosphor samples with different Er 3+ and Yb 3+ doping levels were synthesized by solid-state chemical reaction for optical thermometry and fully characterized. The results show that each phosphor sample mainly consists of NaLa(WO 4 ) 2 crystalline phase and has a nominally stoichiometric chemical composition. The phosphor grains have massive polyhedron morphology, good size homogeneity with a mean value of ∼5 μm and a cutoff phonon energy of 927 cm −1 . The 530 and 550 nm upconversion fluorescence of Er 3+ in the phosphor samples and their temperature characteristics were investigated under 980 nm excitation. The results show that the phosphor exhibits strong upconversion fluorescence and the maximum fluorescence intensity is observed at the optimal Er 3+ and Yb 3+ doping levels of 5 and 20 mol%, respectively. The two-photon process is responsible for the upconversion fluorescence. The spectral structure of either 530 or 550 nm fluorescence band is thermally stable. The peak absolute thermal sensitivity is observed at ∼490 K and has a peak value of ∼9 × 10 -3 K -1 . As expected, Er 3+ or Yb 3+ doping level has little effect on the thermal sensitivity. The phosphor displays a wide dynamical response range of thermal sensitivity from 293 to 800 K, where the sensitivity varies within (6.5–9.0) × 10 -3 K -1 . A comparison study shows that the temperature characteristics obtained from the cooling procedure are almost the same as those obtained from the heating procedure. Besides, the effects of Er 3+ /Yb 3+ doping level and heating/cooling on fluorescence color chromaticity were also studied. Based on the results, the Er 3+ /Yb 3+ -codoped NaLa(WO 4 ) 2 phosphor shows strong fluorescence, good thermal stability, high thermal sensitivity and broad response range of thermal sensitivity. Thus, it is a promising material for thermal detection over a wide temperature range of 293−800 K.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2023
·
IF 4.9
Boxu Xu,Chao Song,Jie Song,Rui Huang,Shaomin Lin,Zhenxu Lin,Yi Zhang,Dejian Hou,Jun Song
In this study, Er 3+ /Yb 3+ codoped Y 2 O 3 –ZnO ceramic phosphors were prepared by sol–gel method. The samples had two emission bands, namely, green (535 nm) and red (660 nm), which are attributed to Er 3+ : 2 H 11/2 ( 4 S 3/2 ) → 4 I 15/2 and Er 3+ : 4 F 9/2 → 4 I 15/2 radiative transitions , respectively. The samples exhibited green- and red-emission intensity enhancement by 1.728 and 2.286 times that of the pure Y 2 O 3 host, respectively and by 514.468 and 214.341 times that of the pure ZnO host. The emission intensities are first enhanced by lattice expansion. With the change of Y:Zn ratio, the high surface energy is converted into low crystal surface resulting in the change of asymmetry crystal field for matrix. When the intensity of the asymmetric crystal field reaches maximum, both emissions are further boosted. When the high surface energy transforms into crystal surface energy, the microstructure changes into a compact mesoporous structure. Consequently, the chemical stability of the samples improves significantly, and the final emission band of the three samples with mesoporous structures is continuously red.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED POWDER TECHNOLOGY
·
2025
·
IF 4.2
Lijie Gao,Yun Wang,Meiting Li,Xuejiao Wang,Qi Zhu,Ji-Guang Li
ZnWO 4 :Yb 3+ /Er 3+ upconversion (UC) nanophosphors were successfully synthesized by hydrothermal reaction at 180 ℃ and subsequent calcination at 700 ℃ for crystallinity improvement and better incorporation of dopant ions. The phosphors were analyzed to emit green (∼533 nm; 2 H 11/2 → 4 I 15/2 transition of Er 3+ ), green (∼546 nm; 4 S 3/2 → 4 I 15/2 ) and red (∼660 nm; 4 F 9/2 → 4 I 15/2 ) light under 980 nm laser excitation, all through a two-photon process. The incorporation of Na + and K + , especially K + , was found to remarkably modify the UC performance of Er 3+ , in terms of red/green intensity ratio (luminescence color), fluorescence lifetime and thermal stability of luminescence, which was rationalized by considering 4 F 7/2 + 4 I 11/2 → 4 F 9/2 cross relaxation and lattice defects/local structure. The optimal ZnWO 4 :0.08Yb 3+ ,0.02Er 3+ phosphor, which contains ∼ 0.97 at.% Na + and 0.16 at.% K + , was demonstrated to have the potential for optical temperature sensing with the thermally coupled 2 H 11/2 / 4 S 3/2 energy levels of Er 3+ .
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2024
·Vol. 130
·期 11
·835
·
IF 2.5
Kou Chen,Duan Bin,Shi Lichun,Yang Hongcai,Ni Heng,Wang Haiyuan,Ye Qing,Hu Junshan,Hu Shigang
The Sc 3+ ions doped NaYF 4 : Yb 3+ , Er 3+ upconversion (UC) nanoparticles are synthesized by thermal decomposition method. We successfully obtained the upconversion luminescence (UCL) nanoparticles from green emission to red emission through doping Sc 3+ ions with different concentrations. Based on the XRD, the phase change process of Sc 3+ ions doped NaYF 4 nanocrystalline phase were demonstrated. More importantly, through the analysis of UC spectrum data, the change in the phase of the NaY/ScF 4 : Yb 3+ , Er 3+ nanocrystalline corresponds to the change in its luminous properties. It determines that the change of crystal field will lead to the change of luminescence, and then modulate the luminescence. NaScF 4 : Yb 3+ , Er 3+ UC nanoparticles exhibit strong red light emission. In addition, the temperature-sensitive properties of the optimal doping concentration of Sc 3+ ion were tested. The sensitivity of NaYF 4 : Yb 3+ , Er 3+ nanoparticles doped with Sc 3+ ion reached the maximum value of 0.024 K − 1 at 498 K. The nanocrystalline has great application value in the fields of optical temperature measurement, biomedicine, bioprobes and colorful display.
研究领域:
材料科学
·
光学工程
·
生物医学工程
·
纳米技术
·
分子影像学
✓ 已验证
DOI
高影响因子
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
·
2019
·Vol. 103
·期 2
·1046-1056
·
IF 3.094
Xiaohui Feng,Le Wang,Ran Wei,Ziyan Wang
Non-contact temperature sensors based on the fluorescence intensity ratio (FIR) have been widely investigated owing to their high sensitivity and reliable real-time monitoring. Herein, the SiO 2 -coated LiY(MoO 4 ) 2 @SiO 2 :Er 3+ ,Yb 3+ phosphor was investigated as an optical thermometry material, which was synthesized using the conventional solid state reaction and coated by a facile wet chemical route. The effect of surface modification on FIR was systematically characterized by structural analyses and spectral measurements and the temperature-dependent up-conversion FIR was investigated from 303 to 603 K under a 980 nm laser excitation. The results showed that the FIR value was thermally stable and the SiO 2 coating led to a higher FIR sensitivity as well as a higher saturation threshold. This work would pave a way to design interesting optical thermometry materials in up-conversion phosphors with better properties.
研究领域:
材料科学
·
光学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·
IF 5.6
Wenbo Ji,Fengmei Zhu,Yuan Gao,Jianbei Qiu
Near-infrared (NIR) spectroscopy has the advantages of instant responsiveness, non-destructiveness and high signal-to-noise ratio, and has broad application prospects in night vision security monitoring, indoor agriculture, biomedical imaging and photodynamic therapy, etc. NIR phosphor-converted light-emitting diodes (NIR pc-LEDs) as a NIR light source, have the advantages of compact size, broadband emission, high efficiency, readily available LED chips as excitation light sources, tunable emission spectrum, and excellent prospects for industrial manufacture. However, the service life of traditional organic packaging materials is greatly reduced over time due to heat accumulation and accelerated aging, especially when operated under high-power irradiation. To overcome this drawback, we successfully prepared Ba 2 NaNb 5 O 15 :Cr 3+ ,Yb 3+ nanocrystals embedded in stable and transparent glass-ceramics by a two-stage process that involves an melt-quenching followed by a re-crystallization heat-treatment. Under 460 nm excitation, the glass-ceramics exhibited a 700–1200 nm broadband NIR emission that originated from the Cr 3+ -activating centers and a sharp line emission near ∼980 nm that originated from the Yb 3+ -activating centers, with a PLQY was ∼43.7 %. A NIR pc-LED light source device with a direct contact structure between transparent glass-ceramic and a blue chip was prepared, and the application potential of the NIR light source in night-vision imaging was verified.
研究领域:
材料科学
·
光学工程
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
CRYSTENGCOMM
·
2018
·Vol. 20
·期 26
·3657-3665
·
IF 3.304
G. Q. Wang,L. Y. Li,Y. N. Feng,H. Yu,X. H. Zheng
In this study, a novel dual-mode luminescence phosphor KBaLu(MoO4)3:Tb3+,Yb3+ has been synthesized by high-temperature solid-state reactions, and the crystal structures have been determined for the first time. Single-crystal X-ray diffraction data reveal that its space groups are C2/c. The crystalline structure is constituted by K/BaO8 distorted square antiprisms, distorted LuO8 polyhedra and two kinds of distorted MoO4 tetrahedra, which form chains lying along the c-axis. Spectroscopic properties and energy transfer mechanisms are investigated by detailed analyses of emission and excitation spectra and excited-state lifetimes. The KBaLu(MoO4)3:Tb3+,Yb3+ phosphor shows dominant green emissions in the visible region, which are due to 5D4 → 7F5 transition of Tb3+ under excitation light in ultraviolet region as well as a 980 nm laser, and the CIE coordinates are close to the Society of Motion Picture and Television Engineers (SMPTE) standard values for primary green (0.310, 0.595). With the increasing temperature, the luminescence of KBaLu(MoO4)3:Tb3+,Yb3+ phosphor decreases almost linearly with the CIE coordinate variation from (0.326, 0.616) to (0.327, 0.530), which results in photoluminescence color variation from primary green to yellowish-green. The present results demonstrate the successful synthesis of a dual-mode luminescence material KBaLu(MoO4)3:Tb3+,Yb3+ phosphor with both up- and down-conversion luminescence properties; moreover, it can be used as a potential spectrum converter in display lighting and anti-counterfeiting.
研究领域:
光学材料
·
固体化学
·
发光材料
·
晶体学
·
光谱学
✓ 已验证
DOI
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2016
·
IF 3.42
Huiqiong Yan,Xiuqiong Chen,Jia Shi,Zaifeng Shi,Wei Sun,Qiang Lin,Xianghui Wang,Zihao Dai
The rare earth ion doped upconversion nanoparticles (UCNPs) synthesized by hydrophobic organic ligands possess poor solubility and low fluorescence quantum yield in aqueous media. To conquer this issue, NaYF 4 :Yb 3 + /Tm 3 + UCNPs, synthesized by a hydrothermal method, were coated with F127 and then assembled with chitosan to fabricate the chitosan/NaYF 4 :Yb 3 + /Tm 3 + composite beads (CS/NaYF 4 :Yb 3 + /Tm 3 + CBs) by Pickering emulsion system. The characterization results revealed that the as-synthesized NaYF 4 :Yb 3 + /Tm 3 + UCNPs with an average size of 20 nm exhibited spherical morphology, high crystallinity and characteristic emission upconversion fluorescence with an overall blue color output. The NaYF 4 :Yb 3 + /Tm 3 + UCNPs were successfully conjugated on the surface of chitosan beads by the gelling of emulsion droplets. The resultant CS/NaYF 4 :Yb 3 + /Tm 3 + CBs showed good upconversion luminescent property, drug-loading capacity, release performance and excellent biocompatibility, exhibiting great potentials in targeted drug delivery and tissue engineering with potential tracking capability and lasting release performance.
研究领域:
材料科学
·
生物医学工程
·
药物递送
✓ 已验证
产品关联
DOI
PubMed
高影响因子
METHODS
·
2019
·
IF 3.782
Hongshun Hao,Shouchen Hao,Hongman Hou,Gongliang Zhang,Yunxia Hou,Zuowei Zhang,Jingran Bi,Shuang Yan
A novel photoelectrochemical (PEC) immunosensor based on CdSe quantum dots (QDs) sensitized Ho 3+ /Yb 3+ -TiO 2 for the detection of Vibrio parahaemolyticus (VP) was assembled. The working electrode was constructed via the layer-by-layer (LBL) method with the Ho 3+ /Yb 3+ -TiO 2 , CdSe QDs, NHS/EDC, antibody of VP (anti-VP), bovine serum albumin (BSA) modified on the surface of the FTO in sequence. Ascorbic acid (AA) acts as an electron donor to combine photogenerated holes in order to provide a stable current system. Ho 3+ and Yb 3+ co-doping TiO 2 broadened the spectral response range of TiO 2 to the infrared region and improved the photocurrent responsiveness of TiO 2 . The PEC immunosensor, with Ho 3+ /Yb 3+ ratio of 1:5, Ho 3+ /Yb 3+ -TiO 2 of 2 mg/mL and PBS solution of pH 7.4, had an optimal photocurrent responsiveness. Immobilization of anti-VP was by classical NHS/EDC coupling reactions between COOH groups of CdSe QDs and NH 2 groups of the anti-VP. The results indicated that PEC immunosensors had a low detection limit of 25 CFU/mL, a wide detection range of 10 2 –10 8 CFU/mL, high stability, low price, and short detection time. This method could be promising for the rapid and ultrasensitive detection of pathogenic microorganisms in the food.
研究领域:
生物传感
·
食品安全检测
·
微生物学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）